Set up track switching on Xiaomi Airdots 2: All ways to control music

Xiaomi Airdots 2 wireless headphones (or Redmi Airdots 2 in some regions) remain among the most popular budget headphones. TWS-But many users have a problem: by default, switching tracks on these headphones is either disabled or unintuitive. Unlike flagship models, where music management is configured through a proprietary app, manual tuning or the use of third-party tools is required.

In this article, we’ll look at all the possible ways to customize the change of compositions on Airdots 2 – from standard gestures to hidden functions. MIUI You'll learn how to use double/triple touch, why the rewind sometimes doesn't work, and what to do if the headphones don't see the commands. And also - how to bypass the limitations of firmware and adjust the control to your needs, even if the official instructions do not provide for this.

Standard ways to control music on Xiaomi Airdots 2

By default, Xiaomi Airdots 2 supports basic gestures for playback control, but their functionality is limited.

• 🎵 Single touch – playback / pause (works on both headphones).
• 🔀 Double-touch – by default, a call to the voice assistant (Google Assistant or Mi). AI), but it can be reassigned.
• 🔇 Retention – turning off/on noise reduction (if supported by firmware).

The problem is that the track switching in the standard Airdots 2 firmware is not assigned to any action. RTL8763B, But there are workarounds, which we'll talk about later.

⚠️ Warning: On some firmware versions, double-tapping can accidentally activate the voice assistant even after reassigning.This is a bug that Xiaomi never fixed.The solution is to upgrade the firmware via Mi Home or reset the headphones to factory settings.

If your headphones don’t respond to touch at all, check:

• 🔋 Headphone charge (below 10% sensor may not work).
• 📱 Compatible with your smartphone (some Huawei and Samsung models require manual Bluetooth profile setup).
• 🔄 Firmware version (update via Mi Home if available).

How to Reassign Double Touch to Switch Tracks

The main way to set up a change of composition is to reassign the double-touch action through the Mi Home app (formerly Mi Fit).

1. Install the Mi Home app from Google Play or the App Store.
2. Connect the headphones to the phone via Bluetooth.
3. Open Mi Home, find Mi True Wireless Earphones 2 (or Redmi Airdots 2) in the list.
4. Go to the Device Settings → Touch control.
5. Select the action for double touch on the left or right earphone:

Importantly, if you assign the next track to the left earpiece and the last track to the right earpiece, the triple tap automatically shuts down. That's the firmware restriction.

Update Mi Home to the latest version|Connect your headphones to Bluetooth|Open the touch settings in Mi Home|Assign "Next Track" to the right earphone|Assign "Previous track" to the left earphone|Reboot the headphones (put in the case for 10 seconds)-->

If Mi Home doesn't have a reassignment option, your version of the app or headphone firmware is outdated.

• 📱 Update Mi Home through the App Store.
• 🔄 Reset the headphones to factory settings (hold the button on the case for 15 seconds).
• 🌍 Change the region in Mi Home to China (sometimes reveals hidden features).

Alternative ways to manage music

If reassignment via Mi Home doesn’t work or you’re not comfortable with limited functionality, there are a few alternative methods:

1. Third-party applications

There are applications that emulate pressing media control buttons via Bluetooth, such as:

• 🎧 Headset Droid (Android) – allows you to assign any actions to touch, including rewinding.
• 🔊 SoundAssistant (Samsung) – Expands Bluetooth Devices.
• 🍎 Shortcuts (iOS) – you can create an automatic rule to change tracks.

Example of settings in Headset Droid:

1. Install the app and give you access to notifications.
2. Select Xiaomi Airdots 2 from the list of devices.
3. Assign a double touch to the action of Media Next (the next track).
4. Save the profile and restart Bluetooth.

⚠️ Note: On iPhone, third-party apps can't completely redefine Bluetooth device management due to iOS limitations. maximum - creating shortcuts that will trigger when you plug in your headphones.

2. Voice commands

If the gestures are not working consistently, you can use voice assistants:

• 🎤 Google Assistant: “Next Track” or “Previous Track».
• 🍎 Siri: "Skipping a Song" or "Going Back to a Past Song».
• 🤖 Alice (Yandex): supports similar teams in Russian.

The disadvantage of this method is that you need an Internet connection and activation of the microphone, which is not always convenient.

3.Physical button on the case

Few people know, but the button on the Airdots 2 charging case can also be used to control:

• 🔘 Single tap - check the level of charge (LED flashes).
• 🔘 Double pressing – forced disconnection of headphones (if they are hanging).
• 🔘 Holding 5 seconds – resetting settings (if the headphones do not respond to touch).

Critical nuance: after resetting through the case button, all touch settings in Mi Home are reset to factory (double touch) = Voice assistants. They're going to have to be reconfigured.

Why Track Switching Doesn't Work: Common Problems

Even after setting it up properly, users often find that changing tracks doesn't work, and here are the main reasons and solutions:

Especially often problems arise when using Airdots 2 with:

• 📱 iPhone – due to iOS restrictions on managing Bluetooth devices.
• 🎵 Spotify – the player can block commands from headphones.
• 🚗 Automagnets – not all head devices support AVRCP 1.6 (Music management protocol).

💡

If the track switching is unstable, try turning off the "Absolute Volume" option in Bluetooth settings on Android. → Connected devices → Settings (⚙️) → Deactivate "Absolute volume".

Update firmware for extended management

Xiaomi periodically releases firmware updates for Airdots 2, which can add new features or fix bugs with control.

1. Open Mi Home and find your headphones in the list of devices.
2. Tap on three points (⋮) in the upper right corner and select Update firmware.
3. If the update is available, connect the headphones to the charge (they should be in the case) and wait for the process to be completed.

Recent firmware versions (e.g. 1.7.0.3 or later) add:

• 🔄 Support for triple touch for rewinding.
• 🎧 Improved synchronization between headphones.
• 🔋 Optimization of energy consumption.

⚠️ Warning: Do not interrupt the firmware update process - this can lead to "bricking" of the headphones (they will stop turning on). If the update is hanging, put the headphones in the case, close it and wait 10 minutes, then try again.

If Mi Home doesn't have an update option, your version of the app doesn't support your region.

• 🌍 Change the region in Mi Home to China or India (in profile settings).
• 📲 Install Mi Home from APK (For example, with APKCombo, which supports your model.
• 🔧 Use third-party tools like this. TWS Toolbox (requires root on Android).

Resetting settings and reconnecting headphones

If none of these methods worked, it may require a complete reset of Airdots 2 to factory settings, which will remove all user settings, including device binding, but often solves management issues.

Resetting instructions:

1. Put both headphones in the charging case and close the lid.
2. Hold the button on the case for 15-20 seconds until the indicator flashes red and white.
3. Open the case cover - headphones should blink white (conjugation mode).
4. Connect them to your phone again via Bluetooth.

After discharge:

• 🔄 Touch settings in Mi Home will reset to factory.
• 📱 You will have to reassign the actions for double / triple touch.
• 🔋 You may need to update the firmware.

If the headphones are not connected after reset:

• 🔌 Try another phone or tablet to pair.
• 🔄 Reboot the Bluetooth module on your device (turn off/on Bluetooth).
• 📡 Make sure the headphones are charged (the indicator on the case should burn white).

💡

Resetting is a last resort. Before you do that, try updating your firmware, clearing your phone's Bluetooth cache, and reassigning your gestures to Mi Home.

Compatibility with different devices and players

The track switching feature on Xiaomi Airdots 2 can work differently depending on the device and the application.

1. Android

Most smartphones with Android 8.0+ Music management through headphones works stably, but there are nuances:

• 🎵 Google Play Music – Supports all teams (play/pause, next/previous).
• 🎧 Spotify – can ignore the commands “previous track” (setting in Spotify itself: Settings) → Reproduction → Devices → Allow control from devices).
• 📺 YouTube/YouTube Music – sometimes requires the playback background to be included.

2. iPhone (iOS)

On the iPhone, functionality is limited due to Apple's policy:

• ✅ Works: playback/pause, next track.
• ❌ Not working: previous track (limitation) AVRCP profile).
• 🔄 Workaround: Use Shortcuts to create an automatic rule.

3. Computers (Windows/macOS)

When connecting to a PC or Mac:

• 🖥️ Windows 10/11 — Music management works only in some players (for example, in the, AIMP or VLC).
• 🍎 macOS – only supported play/pause (for next/previous You need additional drivers like ToothFairy).

If the headphones do not switch tracks on PC:

1. Update your Bluetooth drivers (via Device Manager).
2. Check the player settings (enable Bluetooth support).
3. Use special utilities like Bluetooth Auto Connect.

FAQ: Frequent questions about managing Xiaomi Airdots 2