Xiaomi Redmi headphones are some of the most popular wireless gadgets due to their combination of price, sound quality and functionality. However, many users use them out of the box, without even realizing the hidden possibilities: from customization of control to fine-tuning the equalizer. This article will help you understand how to best customize the headphones Redmi AirDots, Redmi Buds or other models of the series – from basic connectivity to advanced chips.
We will look at not only the standard instructions from the manual, but also non-obvious tricks: how to change the purpose of buttons, activate low latency mode for games, set up auto-disconnection to save battery and even use headphones with a high-end headphone.-Xiaomi We're going to focus on solving some of the most common problems, from unstable connections to distortions of sound, and if you want your Redmis to sound better, work longer, and surprise your friends with some of the most unusual features, read on.
1. Connecting Xiaomi Redmi headphones to a smartphone
The first step is syncing the headphones to the device. The process is slightly different depending on the model, but the overall scheme is the same for most Redmi AirDots, Redmi Buds. 3/4 others TWS-headphone.
First, remove both headphones from the case, they should automatically turn on and go into pairing mode (the indicator on the case will flash white or red).
- 🔄 Press and hold the button on the case. 3-5 seconds until the indicator starts to flash quickly.
- 📱 On your smartphone, open Settings → Bluetooth and select Redmi Buds (or your model) from the list of available devices.
- 🔒 Confirm the pairing - some models will need to enter PIN-code.
If the headphones are not determined, try:
- Reboot Bluetooth on your smartphone (disable / turn on the module).
- Reset the headphone settings (click the button on the case for 10 seconds until the indicator goes out and flashes red).
- Make sure the headphones are charged (the indicator on the case should be green when connected to charging).
⚠️ Attention: Xiaomi Redmi headphones can conflict with other Bluetooth devices within range. If the connection is constantly broken, turn off other gadgets (fitness bracelets, smart watches) or move to a place with less interference.
2.Configure via Mi Home / Xiaomi Earbuds app
The official Xiaomi Earbuds app (previously features were in Mi Home) gives you access to advanced settings that are not in the standard Bluetooth menu. Download it from Google Play or the App Store (not available for iOS for all models).
After connecting headphones in the application will be available:
- 🎛️ Equalizer with presets (Basic Boost, Pure Vocals, Customized).
- 🔊 Transparency mode (for models with support, for example, Redmi Buds 3 Pro).
- 🎮 Low Delay Mode (Helpful for Games and Video Viewing).
- ⚙️ Assignment of buttons (double touch, retention).
How to set up the equalizer:
- Open the app and select your headphones.
- Go to the Sound section. → equalizer.
- Choose a preset or create your own by moving sliders for 60Hz (bass), 230Hz (medium), 1.5kHz (upper middle), 6kHz and 14kHz (high).
- Keep your profile under a unique name.
Increase 60Hz by +3dB for bass|
Lower down. 230 Hz. -1 silk-block|
Increase 6kHz by +2 dB for vocal details|
Save your profile as "Music"-->
Important detail: in the application Xiaomi Earbuds for models Redmi Buds 4 Pro and newer feature available LDAC — High-resolution audio codec (up to) 990 Activated in audio settings, but requires support from a smartphone (e.g. Xiaomi) 12/13 series POCO F4/F5).
3. Managing gestures and buttons
Xiaomi Redmi headphones support touch or physical button management (depending on the model).
- 👆 One touch - playback/pause.
- 👆👆 Double touch – the next track (right earpiece) or the previous (left-handed).
- 👆👆👆 Triple touch – Calling the voice assistant.
- 🔄 Retention – turning off sound (on some models).
You can change the purpose of gestures in the Xiaomi Earbuds app:
- Go to Settings. → Management.
- Select an action for each gesture (e.g., double tap on Transparency Mode).
- For models with buttons (e.g. Redmi AirDots 2), options are available: Next track, Previous track, Voice Assistant, Call Deflection.
⚠️ Warning: Redmi Buds 3 Lite and some other budget models don't reassign button retention, it's always responsible for on/off. This is a hardware limitation, it can't be circumvented by software.
How to reset the gesture settings to factory?
4. Sound optimization for different scenarios
Xiaomi Redmi headphones can be adapted to specific tasks: listening to music, playing games, calling or watching movies.
| Script | Recommended settings | Additional advice |
|---|---|---|
| Music. | Equator: Bass boost or customized (+3 dB by 60 Hz. Codec: AAC (for iPhone or aptX (for Android). | Use support headphones LDAC for Hi-Res audio. |
| Games | Activate Low Latency Mode in the app. Turn off the equalizer (or select Flat). | The case charge should be >50%, otherwise the delay may increase. |
| Calls. | Turn on Noise Reduction (if supported). Use Transparency Mode in crowded areas. | For better hearing, keep the microphone close to your mouth. |
| Movies | Equalizer: Cinema or Customized (+2 dB by 1.5 kHz. Codec: SBC (universal, but with less delay). | Synchronize the sound with the video in the player (for example, in the video). VLC). |
For models with active noise cancellation (ANC) (For example, Redmi Buds 4 Pro):
- 🎧 Turn it on. ANC in the application or button retention (depending on the model).
- 🔇 In transport, choose the mode Transport (suppresses low-frequency noise).
- 🏢 Office mode will fit in the office (removes voices and keyboards).
💡
If the sound in the Redmi headphones is distorted at high volume, lower the level to 80% and activate the volume limiter in the smartphone settings (Android: Settings) → Sound. → Safe sound).
5. Solving common problems
Even the most reliable headphones sometimes fail.-5 Xiaomi Redmi users’ problems and ways to fix them:
🔌 Headphones don't connect to the phone
- 📱 Reboot Bluetooth on your smartphone.
- 🔄 Reset the headphones (hold the button on the case for 10 seconds).
- 🔋 Check the charge of the case (the indicator should burn green when connected to the charger).
- 📲 Remove the device from the list of conjugates and connect again.
🎵 The sound is interrupted or distorted
- 📶 Make sure there are no obstacles between the headphones and the phone (walls, metal objects).
- 🔄 Switch to codec. SBC (in Bluetooth settings on Android).
- 🔋 The case charge should be >30% – with a low charge, interference is possible.
- 📱 Close background applications that use Bluetooth (fitness trackers, smart watches).
🔋 They're discharged fast.
- ⚡ Turn off Noise Reduction and Transparency Mode when they are not needed.
- 📴 Turn the volume down to 60-70% — This will extend the working hours 1-2 hour.
- 🔄 Update the firmware of headphones through the Xiaomi Earbuds app.
- 🔋 Keep your headphones in a case – they consume energy even when turned off.
🎤 The microphone is not working.
- 🔄 Reconnect the headphones to the phone.
- 📱 Check the microphone permissions in the app settings (such as WhatsApp or Zoom).
- 🧹 Clean the microphone grille from dust with a soft brush.
- 🔊 Turn on Noise Reduction when calling in headphone settings.
🔊 Different levels of volume in the left and right earphone
- 🔄 Reset the headphone settings (hold the button on the case for 10 seconds).
- 🧹 Clean the speakers from earwax with a cotton swab (without alcohol!).
- 🎧 Check the density of fittings – they should completely close the ear canal.
- 📲 Update the firmware through the Xiaomi Earbuds app.
⚠️ Warning: If you have a problem after all the manipulations, check the headphones on another device. If the symptoms recur, it's a hardware malfunction, and you should contact the service center. Xiaomi provides a 12-month warranty on most Redmi models.
6. Hidden functions and life hacks
Few people know, but Xiaomi Redmi headphones can do more than the instructions say. Here are some undocumented features:
🔊 Automatic shutdown when removed from the ear
Redmi Buds 3 Pro and later have a wear sensor to activate:
- Open the Xiaomi Earbuds app.
- Go to Settings. → Wear sensor.
- Turn on the Autopause option when you withdraw.
Music will now automatically pause when you remove the headphone and resume when you put it on.
🎧 Mono mode (use of one headphone)
You can use only the right or left earphone to save charge:
- Take out only one headphone from the case - it will automatically connect.
- For models without auto-connection: hold the button on the case for 3 seconds until the white indicator flashes, then get the right earphone.
🔋 Checking the charge level of the case and headphones
You can find out the exact percentage of charge:
- Through the Xiaomi Earbuds app (State of the Union section).
- On Android: In the Bluetooth status bar (click on the headphone icon).
- On iPhone: in the Battery widget (add it to the home screen).
🎵 Customization of voice prompts
In some models (for example, Redmi Buds 4 Pro) you can change the language of voice notifications:
- Open the Xiaomi Earbuds app.
- Go to Settings → Voice prompts.
- Choose the language: Russian, English, Chinese.
🔄 Manual firmware update
If the automatic update does not work:
- Put the headphones on the phone.
- Open the Xiaomi Earbuds app and check the Updates section.
- If an update is available, follow the on-screen instructions (don’t turn off the headphones during the process!).
💡
Hidden features are often model-dependent, such as the Redmi Buds 4 Pro. LDAC And dynamic noise cancellation, and Redmi AirDots 3 doesn't. Always check your model's specifications in official sources.
7. Compatibility with non-compatibility-Xiaomi device
Headphones Xiaomi Redmi perfectly work not only with smartphones brand, but also with devices from other manufacturers — iPhone, Samsung, Huawei and even laptops.
📱 Connection to iPhone (iOS)
- 🔄 The process of pairing is standard: Settings → Bluetooth.
- 🎧 Equalizer and noise reduction features will be limited (Xiaomi Earbuds app does not support iOS for most models).
- 🔊 Use the codec. AAC for better sound (online automatically).
🖥️ Connection to PC (Windows/macOS)
- 🔄 On Windows: Options → Devices → Bluetooth → add.
- 🍎 On macOS: System settings → Bluetooth.
- 🎵 To fine tune the sound, use third-party equalizers (e.g. Equalizer) APO Windows).
🤖 Connecting to Android smartphones from other brands
- 📱 Install Xiaomi Earbuds app from Google Play (works on most Android devices).
- 🔊 Samsung may need to disable Dual Connection (in Bluetooth settings) to avoid sound issues.
- 🔋 Huawei and Honor sometimes don’t display charge levels – use Xiaomi Earbuds app to monitor.
On Linux, headphones connect via Bluez, but codec issues may arise AAC. In this case, manually switch to SBC:
pactl list sinks | grep -i codec
pactl set-sink sink_name codec=SBC