Xiaomi Earbuds Basic 2: Complete Instructions for Configuring and Using

Xiaomi Earbuds Basic 2 wireless headphones have become a popular choice among users who value a balance of price and quality. These headphones offer stable Bluetooth 5.2 connection, light weight (only 4.6 g each) and up to 6 hours on a single charge. However, even with such simple devices, beginners often have questions: how to connect them correctly, adjust the sound or update the firmware?

In this article, we’ll go through all the steps from first turn on to fine-tuning through the Mi Fit or Xiaomi Wear app, and learn how to sync your headphones with Android and iOS, adjust touch controls, and solve typical problems like single-earphone discharge or intermittent sound. Importantly, Earbuds Basic 2 doesn’t support ANC, but has a transparency mode — its activation is described in the section on sound effects.

1.Preparation for the first use

Before you first turn on the Xiaomi Earbuds Basic 2, check the package: the box should have headphones, a charging case, a USB-C cable and documentation. If the case is not charged, connect it to the power source for 30 to 60 minutes. The indicator on the front of the case will light up red during charging and green when fully charged.

To remove the headphones, press the button on the back of the case, the lid will open with a magnetic mechanism. Take out both earphones: they will automatically turn on and go into pairing mode (the indicators on the headphones will flash white and red). If the indicators do not blink, return the headphones to the case and pull again.

• 🔋 Case Charge: Full Charging Takes ~2 hours, case holds up to 4 cycles of recharging headphones.
• 📱 Compatible: Works with Android 6.0+, iOS 12+ and other devices with Bluetooth 4.2+.
• 🔊 First turn on: if the headphones are not turned on, hold the touch panel on each of them for 5 seconds.

⚠️ Note: Do not use chargers with higher power 5V/1A — It could damage the case battery. USB-C from the kit optimized for safe charging.

2. Connect to a smartphone (Android and iOS)

It takes less than a minute to pair the Earbuds Basic 2 with your phone. On Android, open Settings → Bluetooth and turn on device search. The list will show "Mi Earbuds Basic 2" — click on it. On iOS, go to Settings → Bluetooth, wait for the headphones to appear in the "Other Devices" section and tap them.

Once successfully connected, the headphones will light up blue (left) and red (right) for 2 seconds. If the connection is interrupted, return the headphones to the case for 10 seconds, then pull out and repeat the pairing. On Android, you can use the Xiaomi Wear app for accelerated connection - it automatically determines the headphone model.

⚠️ Note: On iOS, some features (such as displaying the charge level of each earphone) may not work properly. Use an Android device with the Mi Fit app for full control.

3. Sensory control setup

Headphones Xiaomi Earbuds Basic 2 equipped with touch panels that respond to touch. by default, the following gestures are supported:

• 🎵 One touch: playback/pause.
• 🔀 Double touch: move to the next track (right earpiece) or the previous one (left-handed).
• 📞 Triple touch: Calling the voice assistant (Google Assistant or Siri).
• 🔇 Hold 2 seconds: turn on/off transparency mode (right earphone only).

To change the purpose of gestures, install the Xiaomi Wear app (for Android) or Mi Fit (cross-platform). From the headphone menu, select Control Settings → Touch gestures and reassign actions. For example, you can set up a double touch to call the last app or turn off the microphone during a call.

Make sure the headphones are connected to the phone | Check the response to one/double touch |Tune gestures in the Xiaomi Wear| App Test transparency mode

-->

If the sensor has stopped responding, wipe the panel with a dry wipe - contamination or moisture can block the signal. Also try resetting the headphone settings (see section 6).

4. Optimization of sound and microphone

By default, Earbuds Basic 2 uses a balanced sound profile, but it can be customized to your preferences. In the Mi Fit app, go to Devices → Mi Earbuds Basic 2 → Sound settings.

• 🎧 Equalizer: Pre-settings (Bases, Bright, Voice) or manually adjusting bands.
• 🔊 Transparency mode: enhances external sounds for safety on the street.
• 🎤 Improved microphone: Reduces noise during calls (only when connected to Android).

To improve call quality, turn off the Absolute Volume feature in Bluetooth settings on Android (path: Settings → System → Developer → Absolute Volume Bluetooth) to prevent the microphone from automatically turning down.

💡

If during the calls the interlocutor does not hear you well, try to speak closer to the right earpiece - the main microphone is located in it.

5. Update firmware and reset settings

The manufacturer periodically releases firmware updates for Earbuds Basic 2, which improve connection stability and add new features.

1. Put the headphones on the phone.
2. Open the Xiaomi Wear or Mi Fit app.
3. Go to the Device Profile → Update the firmware.
4. If a new version is available, click "Update" and wait for completion (earbuds will reboot).

It takes 3-5 minutes. Don't interrupt the update or put your headphones in the case, it can cause a failure. After the update, check the firmware version in the same menu.

For a complete reset (for example, if the headphones are not synchronized):

1. Put both earbuds in the case.
2. Open the case lid.
3. Hold the touch panels on both headphones for 10 seconds until the indicators start flashing red and white.
4. Close the lid and reconnect the headphones.

💡

Resetting erases all user gesture and sound profile settings, and after the procedure, you will need to reset through the application.

6. Removing common problems

Even with reliable headphones, you can have problems. Here are the typical scenarios and their solutions:

• 🔌 Headphones don't charge: Check the cleanliness of contacts in the case (clean with an alcohol napkin). USB-C. If the case indicator does not burn, perhaps the battery is defective - contact the service.
• 🎵 The sound is interrupted: Make sure the distance to the phone is less than 10 meters. Disable other Bluetooth devices nearby (they may cause interference). In your Bluetooth phone settings, select "Sound Quality Priority".
• 🔋 One earphone discharges faster: Level the charge level by completely discharging and charging both earbuds. Check the density of the earbud fitting to the ear - weak contact can increase power consumption.

⚠️ Warning: If after falling or getting moisture headphones began to make extraneous sounds (squeaking, crackling), immediately stop using.This may indicate damage to the speaker or battery. Contact with liquid is not covered by the warranty, even if the headphones are protected class IPX4.

7. Care and extension tips

To make Xiaomi Earbuds Basic 2 last longer, follow the following simple recommendations:

• 🧼 Clean: Weekly wipe your headphones and case with dry soft cloth. To remove earwax, use a cotton swab soaked in alcohol (do not drip the liquid directly onto the speaker!).
• 🌡️ Temperature: Do not leave your headphones in direct sunlight or in the cold (optimal range: from 0)°C to 35°C).
• 🔋 Charging: Try not to discharge the case completely - recharge it at a charge level below 20.
• 🎧 Storage: Keep your headphones in your case when not in use, and this will protect them from dust and mechanical damage.

The headphone battery is designed for ~500 charging cycles. To extend its life, avoid constantly recharging "a little bit" - it is better to discharge the headphones to 10-15% before fully charging.

💡

If the headphones have not been used for a long time (more than a month), before the first switch on, fully charge the case, even if the indicator shows a residual charge.

FAQ: Frequent questions about Xiaomi Earbuds Basic 2