Xiaomi AirDots 2 Pro: full instructions for setting up and using

Xiaomi AirDots 2 Pro (also known as Mi True Wireless Earphones 2 Pro) remains one of the most popular headphones in the world. TWS-But even with these proven gadgets, there are customization nuances that are not always obvious to users. In this article, we will analyze all stages of working with headphones - from the first connection to fine-tuning gestures, updating firmware and eliminating typical problems.

It is important to understand that AirDots 2 Pro supports not only basic functions like music playback, but also active noise cancellation (ANC), Transparent mode, as well as customization of management through the application Mi Home (now Xiaomi Home), while many users face difficulties already at the stage of pairing with a phone or laptop. We will help to avoid errors and reveal the hidden features of the device, which are not written in the official instructions.

Preparation for the first connection

Before you start setting up, make sure your Xiaomi AirDots 2 Pro is fully charged. The indicator on the case should be white (when charging - red). If the headphones are discharged, connect the case to the power source for 30 to 60 minutes.

• 📱 Smartphones: Android 5.0+ or iOS 10.0+ (Android 8.0 is recommended for full functionality+).
• 💻 Computers: Windows 10/11, macOS 10.14+ (Bluetooth support required 4.2 or newer).
• 🎮 Gaming devices: PlayStation 4/5, Nintendo Switch (manual only).

If you connect headphones to a Xiaomi smartphone, pre-update the Xiaomi Home app to the latest version in Google Play or App Store.This guarantees access to all features, including customization. ANC For other brands, some of the features (such as firmware) will be limited.

Note that if the headphones were previously paired with another device, they must be reset to factory settings. Otherwise, there may be an unstable connection or no sound in one of the headphones. How to do this, read the next section.

Resetting headphones to factory settings

The discharge procedure is required in three cases:

1. Headphones do not connect to the phone or only connect one at a time.
2. The sound is interrupted, there are delays or different volumes in the left/right earphone.
3. You plan to sell or transfer the device to another user.

To reset Xiaomi AirDots 2 Pro, follow the following steps:

When you reset, the headphones automatically go into pairing mode, so if the indicator on the case flashes white, you can start connecting. If the LED does not respond, try recharging the case or repeat the procedure.

⚠️ Warning: Don't confuse reset with reset. If you just remove the headphones from the case and put them back, it won't return the factory settings. Also, don't press the button on the case for too long (more than 30 seconds) - this can cause the firmware to fail.

Connecting to a smartphone (Android/iOS) PC

The pairing process varies depending on the type of device, so let's look at the step-by-step instructions for each platform.

Android smartphones (including Xiaomi)

1. Open the case cover with headphones (they should be inside).

2.On your smartphone, turn on Bluetooth in the notification panel or in Settings → Connected devices.

3. In the list of available devices, select Mi True Wireless Earphones 2 Pro (or Xiaomi AirDots 2 Pro).

4. Confirm the pairing.

For Xiaomi devices, after connecting, a window will automatically open with a suggestion to install the Xiaomi Home application. Agree - this will give access to advanced settings.

iPhone and iPad

On iOS, the process is similar, but with nuances:

1. Open Settings → Bluetooth.

2. Wait for AirDots 2 Pro to appear on the list.

3. Click on the headphone name and confirm the connection.

Note: iPhone will not work active noise cancellation (ANC) These features are only available through the Xiaomi Home app, which does not officially support iOS, but you can use alternative applications like MaterialPods (unofficial, crash risk!).

Connection to Windows/macOS

For PC:

1. Turn on Bluetooth in the system tray (Windows) or in the menu bar (macOS).

2. Click Add Device (Windows) or Connect (macOS).

3. Select AirDots 2 Pro from the list.

4. When requesting a code, enter 0000.

On Windows, you may need to install a Qualcomm Atheros driver for stable operation. If the sound is interrupted, try turning off high-quality audio in your Bluetooth device settings.

Customization of gestures and controls

Xiaomi AirDots 2 Pro supports touch control, but not all gestures are assigned by default.

1. Open the Xiaomi Home app.

2. Go to Profile. → My devices. → AirDots 2 Pro.

3. Select Sign settings.

Actions available:

• 🎵 Double touch: playback/pause, next track, previous track, voice assistant call.
• 📞 Triple touch: shutdown ANC, lensing.
• 🔇 Retention: Turn off sound (only on Android).

Example of optimal setting:

• 👉 Left earphone (double touch): previous track.
• 👉 Right earphone (double touch): next track.
• 👉 Triple touch on any: switching ANC/transparent.

⚠️ Attention: If the gestures don't work, check the density of the earbuds to the ears. Too little or too much touch may not be recognized. Also make sure that the fingers are not moisture - this interferes with the sensors.

💡

To quickly switch between ANC And in a transparent mode, touch any headphone three times, which is convenient in transport or on the street when you need to hear the surrounding sounds.

Active noise cancellation (ANC) and transparent

AirDots 2 Pro is equipped with hybrid ANC, It suppresses low-frequency noises (such as the hum of an engine in an airplane or subway), but the effectiveness depends on the correct setting and density of the headphones.

To turn on ANC:

1. Open Xiaomi Home and select your headphones.

2. Go to Settings ANC.

3. Activate the Active Noise Reduction Slider.

Modes available:

• 🔇 ANC: Maximum noise reduction (suitable for transport).
• 🌿 Transparent mode: skips external sounds (useful on the street).
• 🎧 Turned off: natural sound without processing.

For better effect:

• 🔹 Choose the right fittings (there are 3 sizes in the kit).
• 🔹 Use the subway or plane ANC maximum.
• 🔹 In the office or home, a fairly medium noise reduction level.

Update and Verification of Version

Regular firmware updates fix bugs, improve sound and add new features to update AirDots 2 Pro:

1. Make sure the headphones are charged more than 50%.

2. Connect them to your smartphone via Xiaomi Home.

3. Go to Settings. → Firmware update.

4. If a new version is available, click Update.

It takes 3-5 minutes. Don't remove the headphones from the case, or close the app during the update. You can see the current firmware version in the same section.

⚠️ Note: If the headphones stopped connecting after the update, reset (see section 2) and repeat the procedure. If the problem persists, roll back the firmware through Xiaomi Home (section Restore the previous version).

Checking the battery charge and increasing the operating time

The battery capacity of AirDots 2 Pro is:

• 🔋 Headphones: 55 mAh (up to 7 hours of work with the ANC).
• 🔋 Case: 500 mAh (up to 25 hours in case mode).

To check the level of charge:

• 📱 On Android: Open Xiaomi Home – Percentage will appear on the device’s home screen.
• 🍎 On iOS: Check the charge level in Settings → Bluetooth (near the headphone name).
• 💻 On PC: Charge level is not displayed – use your smartphone to check.

Tips for increasing working hours:

• 🔹 Turn it off. ANC, If not, it saves up to 20% of the charge).
• 🔹 Keep your headphones in your case when not using them.
• 🔹 Avoid full discharge – charge at 10-20 levels%.

💡

Optimal mode for saving the battery: ANC switched off, volume 60-70%, gestures turned off (unless used).

Typical problem solving

Even after you set it up properly, users experience typical failures, and let's look at the most common ones and how to fix them.

If the headphones are not defined by the device:

1. Make sure they are in pairing mode (blinking white indicator).
2. Reboot Bluetooth on your smartphone (Settings) → Bluetooth → restart).
3. Try connecting from another device.

For sound problems (wheezing, distortion):

• Clean the speakers with a soft brush (do not use alcohol!).
• Check the density of the fittings.
• Update the firmware of headphones and Bluetooth stack on your smartphone.

Frequently asked questions