Smart bracelet Xiaomi Mi Band 4 became a hit in the market of wearable electronics due to its bright AMOLED-However, in order for a device to work correctly and be happy with the accuracy of the data, it must be properly prepared for its first use. The initial setup process often raises questions for beginners, especially regarding the choice of application and how to proceed.
A competent initial configuration takes no more than 10-15 minutes, but requires care. Mistakes at this stage can lead to notifications not coming and sensors not working correctly. In this article, we will take a detailed look at every step, from unpacking to customizing personalized dials.
It's important to understand that Xiaomi's ecosystem is constantly evolving, and the tracker software needs regular updates. It's through your smartphone that you get access to all the hidden features of the device. Let's start with the most important thing - preparing your smartphone and installing the necessary software.
Preparation of the smartphone and installation of the application
The first and most important step is to install the right software. Mi Band 4 is officially run with the Mi Fit app (renamed Zepp Life in some regions) or the new Mi Fitness app. The choice depends on the bracelet firmware version and region, but the classic standard remains Mi Fit.
Download the application should be exclusively from official stores: Google Play Market for Android or App Store for iOS. APK-Files may cause malware installation or synchronization functions to fail.
💡
Before installing the app, make sure that Bluetooth and geolocation (GPS) are enabled on the smartphone, as without them, device search may not be possible.
Once installed, you need to register for a Mi Account, which is a mandatory requirement for data synchronization, and if you already have an account from a Xiaomi phone or other appliances of this brand, you can use it.
- 📲 Download the official Mi Fit or Zepp Life app.
- 🔐 Register using your phone number or email.
- 🌍 Choose the right region (usually Russia or China).
- 📡 Allow the app to access Bluetooth and geolocation.
⚠️ Warning: Do not try to connect the bracelet through the standard Bluetooth menu in the phone settings.Pairing only occurs inside the application, manual connection in the system can block further settings.
First activation and activation of the tracker
Once the software is ready, we move to the tracker itself. Xiaomi Mi Band 4 comes in sleep mode to save battery power when stored in stock. To "wake up" the capsule, it must be connected to the charger.
Remove the capsule from the strap (if it was there) and insert it into the charging dock. The contacts should fit tightly. Once the Mi logo and charge level appear on the screen, the device is ready to pair. If the screen doesn't catch fire, try drying the contacts.
☑️ Checking of interface readiness
Now open the app on your smartphone. In the main menu, click on the Profile tab (usually the person icon at the bottom right), then select Add Device and find Mi Band 4.
It is important to keep the bracelet as close to the phone as possible while searching. the distance should not exceed 1-2 meters. If the search lasts a long time, try rebooting Bluetooth on your smartphone.
The process of pairing and binding of the device
When the app finds your tracker, the device and its ID will appear on the smartphone screen. The bracelet itself may also request a pairing confirmation (vibration or Bluetooth icon).
The binding process takes 10 to 30 seconds, and at that time, encryption keys are exchanged, and you can't interrupt this process, or you'll have to start over, and after a successful connection, the application will suggest updating the firmware if a new version is available.
What to do if the bracelet is not in place?
Once you're tied, a welcome message will be displayed on your smartphone screen, and your smartphone and bracelet are now connected by a single ecosystem, and all your steps, pulse and sleep data will be automatically transmitted to the cloud.
- 🔗 Click "Connect" in the application when the device is detected.
- ✅ Confirm (conjugation) on the bracelet screen if required.
- ⏳ Wait for the synchronization of time and date to end.
⚠️ Warning: One Mi Fit account can be tied to one bracelet at the same time.If you want to connect the bracelet to a new phone, the old one must be untied.
Update of firmware and basic settings
Once connected, the app will likely suggest updating firmware, a critical step, and new firmware versions correct the pulsemeter, improve pedometer accuracy, and add support for new languages or dials.
The upgrade process is done by air (OTA) - make sure the bracelet is at least 20% charged and the smartphone has a stable internet connection. Don't turn off the smartphone screen or move far away from the tracker while booting.
In the app settings, you can change the system settings. Go to the device profile to set: Profile -> Mi Band 4 -> Settings. Here you can access the wrist lift settings to turn on the screen, sensor sensitivity and time format (12 or 24 hours).
| Parameter | Description | Recommended value |
|---|---|---|
| Wrist lifting | Turning on the screen when raising your hand | Included. |
| Vibration. | The power of tactile response | Medium or High. |
| Sleep monitoring | Automatic analysis of sleep phases | Included. |
| Phone search | The sound on the phone with the team from the bracelet | If you wish, |
💡
Updating the firmware is a must for stable operation, as the version often contains bugs fixed in releases.
Setup of notifications and data display
One of the main features of the Mi Band 4 is to display notifications, so that they come, you need to give the application the appropriate permissions on Android or iOS, without which the bracelet will only record steps, but remain silent when calling.
In the app, go to the notification section and select the right sources: calls, SMS, as well as specific applications (WhatsApp, Telegram, Viber). It is important not to overdo it, otherwise the constant vibration will quickly drain the battery.
You can also set up the display of data on the screen, and you can choose which information will be displayed by default: weather, pulse, steps or date. This is done using the Settings -> Displayable elements menu.
- 📞 Turn on incoming calls for important contacts.
- 💬 Choose messengers that are really important notifications.
- ⌚ Set up the order of the widgets on the main screen of the bracelet.
- 🔕 Use the "Do Not Disturb" mode at night.
Personalization: dials and straps
Unlike previous models, the Mi Band 4 has a color screen, which opens up huge opportunities for customization. Standard dials are few, but they can be changed through the app.
The Dials (or Store) section has a theme store, many of which are free, and you can choose a static image, animated background, or a minimalist style with large numbers.
To download the new style, go to the bracelet profile, select "Dials", find the one you like, and click "Install." It takes about a minute, and you can also set your own photo from the phone gallery as a background.
⚠️ Attention: Animated dials (GIF) If autonomy is more important than beauty, use static images.
And don't forget about the physical personalization, because the fourth model straps are versatile and also suitable for the Mi Band 3, and they're easy to change with the back of the capsule.
Solving Frequent Problems When Setup
Despite the simplicity, there are technical difficulties, and the most common problem is that the bracelet is not visible when you search, and in 90% of cases, this is solved by completely removing the device from the Bluetooth list in the phone settings and restarting the smartphone.
Another problem is time desynchronization, and if the watch on the wristband is running away or lagging, check your time zone settings in the Mi Fit app, and re-pairing also helps.
If the bracelet stopped vibrating when notified, check if the tracker itself has Do Not Disturb mode (moon icon) and also make sure the app ticks against the desired source app.