How to set up a smart watch Xiaomi Amazfit GTS 2: a complete guide with secrets

Xiaomi Amazfit GTS 2 is not just a stylish smartwatch, but a real assistant for sports, health and everyday tasks. However, many users face the problem: how to properly configure the device to work at full power? In this article, we will discuss all the steps from the first synchronization to hidden functions that are not written in the official instructions.

The Amazfit GTS 2 combines accurate health monitoring, 90+ exercise regimes, and up to 7 days of battery life. But without the right setup, you run the risk of using only 30 percent of its capabilities. For example, did you know that sleep mode can track not only phases, but also breathing during sleep? Or that notifications can be customized selectively for each messenger? We'll tell you how to do this.

Important: The instruction is relevant for firmware version 3.6.5+ (check Settings → About Watch → Software Version). If you have an older version, some features may not be available, update your watch through the Zepp app (formerly Mi Fit).

Preparing for the first setup: what to do before turning on the clock

Before you start setting up, make sure you have everything you need:

• 📱 Android 6.0+ or iOS 12.0+ (iPhone requires Zepp from the App Store).
• 🔋 Magnetic connector charger (includes). The watch must be at least 50 percent charged.
• 🌐 Stable Wi-Fi connection (for firmware download) and Bluetooth 5.0+.
• 📌 Xiaomi or Zepp account (can be created during setup)

If you are upgrading with the Amazfit GTS (first version), note that GTS 2 has changed its measurement algorithm SpO₂ — it now works more accurately, but requires a still hand position for 30 seconds.

⚠️ Warning: Do not use chargers from other devices, even if the connector is suitable. Amazfit GTS 2 is sensitive to voltage - an inappropriate adapter can damage the battery.

Install and configure the Zepp app (formerly Mi Fit)

All settings of the Amazfit GTS 2 are made through the official Zepp app.

• 🤖 For Android: Google Play.
• 🍎 For iOS: App Store.

After installation:

1. Open Zepp and click Profile → Add the device.
2. Select the Amazfit GTS 2 from the list.
3. Follow the instructions on the screen: Allow access to notifications, contacts, and geodata (the latter is needed to track routes).
4. Enter your Xiaomi account details or register a new one.

If the app does not find the watch:

• 🔄 Reboot Bluetooth on your phone.
• 📱 Make sure there are no active phones on the phone. VPN or firewalls blocking the connection.
• 🔋 Reset the clock (press the button for 10 seconds).

💡

If you have an iPhone, turn off Ad Tracking Restrictions in your phone settings before syncing, which eliminates the problem of missing notifications.

Basic clock setting: time, language and basic parameters

After synchronization with the application, set the main parameters directly on the clock:

1. Interface Language: Go to Settings → Language and select Russian (if not, update the firmware).
2. Time format: In Settings → Display → Time format set 24-hour or 12-hour.
3. Screen brightness: The optimal value is 3-4 divisions (out of 5). At maximum brightness, autonomy is reduced by 20%.
4. Raising your hand to activate: Enable Settings → Display → Raising your hand. The function only works when you wear a watch on your left hand (by default).

For convenience, you can set up quick gestures:

• 👆 Twice tap the screen to go back.
• 👇 Swipe down from the top edge to open the notification panel.
• 👈 Swipe left/right to switch widgets.

Is the clock synchronized with the Zepp app?|Russian language established?|Is automatic pulse measurement set up?|Is the "Hands-raising" mode on"?|Is the firmware updated to the latest version?-->

Setup notifications: how to get only important alerts

By default, the Amazfit GTS 2 shows notifications from all apps, which quickly drains the battery and distracts.

1. Open Zepp on your phone.
2. Go to Profile → Amazfit GTS 2 → Notifications.
3. Activate the Notification Switch.
4. In the Applications section, select only those alerts from which you need (for example, WhatsApp, Telegram, Calls).
5. Turn off unnecessary system notifications (e.g. from Google Play or Weather).

For the iPhone, additional settings are required:

1. Open your iPhone settings → Notifications → Zepp.
2. Enable notifications and show on the lock screen.
3. Return to Zepp and re-synchronize the clock.

If notifications do not arrive:

• 📵 Check if the watch is not on Do Not Disturb (Settings → Do Not Disturb).
• 🔄 Reconnect the clock to your phone (forget the device in Bluetooth settings and sync again).
• 📲 Make sure that the Zepp app is not killed in the background (on Android, check in Settings → Apps → Zepp → Battery → No Limits).

⚠️ Warning: On iPhone, notifications from Viber and Skype may not arrive due to iOS restrictions.The solution is to use the official apps of these messengers for the Apple Watch (they will be duplicated on Amazfit).

Sports regimes and health monitoring: hidden opportunities

Amazfit GTS 2 supports 90+ training modes, but only the basic ones are displayed by default.

1. In the Zepp app, go to Profile → Amazfit GTS 2 → Sport.
2. Click Add Sports and select from the list (e.g. Yoga, Swimming in the pool, Skalka).
3. For accurate tracking of swimming, activate Pool Mode and specify the length of the track.

The Secret Functions of Health Monitoring:

• 🩺 Measurement SpO₂ (oxygen saturation): Available in Settings → Health → SpO₂. Take off the watch, shake your hand and put it on again for accuracy.
• 💤 Sleep breathing analysis: included in Settings → Sleep → Breathing. Requires wearing for at least 4 hours in a row.
• 🏃 Recovery score: After a workout, the clock will show how long it takes to rest (in Zepp → Sport → History).
• 🩸 PAI (Personal Activity Index): automatically calculates the optimal workload for the week, and the goal is to score 100 points PAI.

For running and cycling, you can adjust voice cues (distance, pace, pulse).

1. In Zepp, select Profile → Amazfit GTS 2 → Sport → Voice prompts.
2. Set an alert interval (e.g., every 1 km or 5 minutes).
3. Select the parameters for sounding (tempo, heart rate, distance).

Dials and personalization: how to make watches unique

In Amazfit GTS 2, you can install dials from the official store or download third-party dials.

1. In the Zepp app, go to Profile → Amazfit GTS 2 → Dials.
2. Select a category (Sports, Classics, Minimalism).
3. Click on your favorite dial and confirm the installation.

The secret features of dials:

• 🎨 Animated dials: consume 15% more battery but look dynamic (e.g. Fire or Waves).
• 📊 Dials with widgets: show weather, heart rate, steps, and even stress levels (example: Info Max).
• 🖼️ Own photos: Upload any image via Zepp (resolution at least 320×320 px).

To return the standard dial:

1. Keep your finger on the screen for 2 seconds.
2. Select More dials → Standard.

⚠️ Warning: Some third-party dials may contain advertisements or collect data.Install only from the official Zepp store or verified sources (e.g. Amazfit Watch Faces).

💡

Dials with animation and complex graphics reduce battery life by 10-15%. Use static black and white themes for maximum running time.

Battery and autonomy: how to extend your work to 14 days

Officially, the Amazfit GTS 2 can hold a charge of up to 7 days, but with optimal settings, this timeframe can be extended to 10 to 14 days.

Additional advice:

• 🔋 Charge the watch to 80-90% (full charge to 100% reduces battery life).
• 🌡️ Avoid overheating (do not leave your watch in the sun or near heat sources).
• 📴 Turn off Bluetooth on your watch if it is lying unused (in Settings → Connections).

If the clock is discharged in 1-2 days:

• 🔍 Check if GPS is running in the background (turn off Settings → Sport → GPS if you are not using it).
• 📲 Remove unnecessary dials (they may contain errors that drain the battery).
• 🔄 Reset the clock to factory settings (Settings) → System system → Reset).

FAQ: Answers to Frequent Questions about the Amazfit GTS 2