Set up a watch on Xiaomi Smart Band: from synchronization to customization of the dial

Xiaomi Smart Band fitness bracelets (including the Mi Band 5/6/7/8 and Amazfit Bip) have become an integral part of the daily lives of millions of users. However, even these seemingly simple devices require the right timing to show current data, sync with the phone and display notifications correctly. Misconfiguring hours can lead to failures in sleep tracking, incorrect pulse data or even complete dissynchronization with the Mi Fitness app (formerly Zepp Life).

In this article, we will analyze not only the basic time setting through the application, but also consider manual adjustment, solving problems with automatic updating, as well as the subtleties of working with time zones and display formats (12/24 We will pay special attention to the Mi Band models. 7 Pro and Mi Band 8, where the setup process has nuances due to built-in GPS and extended functions.

1. Preparation for setup: what to do before synchronization

Before you start setting the time on the Xiaomi Smart Band, make sure that the key preparatory steps are followed. Without them, the bracelet may not sync with the phone or show the wrong time.

• 📱 Install the official app: For most models (Mi Band) 5/6/7) This is Mi Fitness (formerly Zepp Life), for Amazfit - Amazfit App. Download it from Google Play or App Store.
• 🔄 Update the bracelet firmware: Outdated software often causes time disruptions. Check for updates in Profile → My devices. → Firmware update.
• 📶 Turn on Bluetooth and geolocation: Time synchronization is impossible without them. Android also requires permission to exact location.
• ⚡ Charge the bracelet to at least 20%: When the charge is low, some functions (including automatic time synchronization) are turned off.

Important: If you are using the Mi Band 8 with offline GPS, activate it in the bracelet menu (Settings → GPS) before setting the time, which will help avoid time discrepancies when disconnecting from your phone.

2. time synchronization through the Mi Fitness app

The main way to set the time on the Xiaomi Smart Band is automatic synchronization through the app, which works for all models, but has nuances depending on the version of the bracelet.

1. Connect the bracelet to your phone: Open Mi Fitness and go to Profile → Add device. Select your bracelet model from the list. Follow the instructions on the screen (request confirmation on the bracelet).
2. Activate Automatic Sync: In the main menu of the app, tap on the bracelet icon. Go to Device Settings → Date and Time. Enable Autosynchronization of Time.

Check the time zone.

The app should automatically determine your belt by geolocation. If time is lost, manually select the region in your phone settings (Settings → System → Date and Time).

A critical feature for the Mi Band 7/8: If the bracelet doesn’t sync the time after you connect, reboot it (hold the 10 seconds button) and repeat the procedure.

Manual time setting: when the automation is not working

Sometimes automatic synchronization fails, such as when you change your time zone or when you reset your bracelet, and you'll need to make manual adjustments.

For the Mi Band 5/6:

1. On the bracelet, scroll down to the point More (or More).
2. Select Settings → Date and time.
3. Turn off Auto Sync and set the time manually.

For the Mi Band 7/8 and Amazfit:

• 🔧 On the bracelet, go to Settings → System system → Date and time.
• 🌍 Select Time Zone (if option is available).
• ⏰ Set the time format (12 or 24 hours).
• 🔄 Enable back Auto Sync after manual settings.

Warning: On the Mi Band 8, manual time settings without connecting to the phone are reset after rebooting. GPS-module.

4. Configure additional functions related to time

In addition to the basic display of time, Xiaomi Smart Band offers advanced features: alarm clocks, inactivity reminders, timers and even displaying time on the lock screen (for models with Always-On Display).

💡 Useful tip: On the Mi Band 8, you can set up automatic shutdown of Always-On Display at night to save charge. → Display. → Schedule AOD.

5.Time Problem Solving: Frequent Errors and Corrections

If the time on the Xiaomi Smart Band bracelet is lost or not updated, the reasons can be different - from software failures to hardware limitations.

⚠️ Warning: If the bracelet shows the time exactly 1-2 hours apart, check the settings for daylight saving time on your phone. → System system → Date and time → Automatic transition to summer time.

• ⏳ Time is out of sync after you connect: Check if Auto Sync is enabled in the app. If so, reconnect the bracelet (forget the device in your phone's Bluetooth settings and reconnect the device).
• 🌐 Wrong time zone: Make sure your phone is on Automatic Time Zone Detection. If you manually selected a region (e.g. Moskva, GMT+3), But if you live in another belt, the bracelet will show the wrong time.
• 🔋 Time stumps after discharge: This is normal behaviour for Mi Band 5/6 — When fully discharged, the internal clock resets. After charging, wait for full synchronization (may take up to a maximum of two hours). 5 minute).
• 📵 The bracelet shows the time of the phone that is not connected to: If you previously synced the bracelet with another phone, reset to factory settings (Settings) → Reset on the bracelet).

💡

If the Mi Band 7/8 bracelet after updating the firmware began to show the time with a delay, try rolling back the software. To do this, in the Mi Fitness application, go to Profile → My devices → Return to the previous version (the option is available within 7 days after the update).

6. Customization of the dial: how to change the time display

One way to personalize the Xiaomi Smart Band is to change the watch face, which affects not only the design, but also the format of the display of time, additional widgets (weather, steps, pulse), and even the color scheme.

How to install a new dial:

1. Open the Mi Fitness app and select your bracelet.
2. Go to the dial (or watch face) section.
3. Choose the option you like and click Install.
4. Confirm synchronization on the bracelet.

Where to download additional dials:

• 🛒 Official Store: Inside the Mi Fitness app (Dials section) → Recommended).
• 🌍 Third-party resources: AmazfitWatchFaces (for Amazfit and Mi Band) WatchFacely (requires registration).
• 📲 Creating your own dial: Using Facer or WatchMaker apps (requires export to.bin format).

⚠️ Note: Installing dials from unverified sources may cause the bracelet to fail. Use only official or community-verified files (e.g., forum files) 4PDA).

7. Features of setting the time on different models Xiaomi Smart Band

While the timing principle on all Xiaomi bracelets is similar, each model has unique nuances. Below is a comparative table of key differences.

💡

On the Mi Band 8, time is synchronized not only via Bluetooth, but also through the GPS-This allows the bracelet to maintain accurate time even without connecting to the phone (e.g. while jogging).

Frequently Asked Questions (FAQ)