Setup Amazfit smartwatch with Xiaomi Redmi phone: a complete guide from A to Z

Device compatibility and connection preparation

The Amazfit smartwatch and Xiaomi Redmi smartphones were designed to perfectly sync in the Mi Ecosystem ecosystem, but even here, users are faced with the nuances of customization. Before you start connecting devices, make sure your Redmi runs on the current version. MIUI (12.5) – This ensures support for the latest Bluetooth 5.0 protocols+, necessary for stable communication with most models of Amazfit (from the GTS 2 to Bip 5 Pro).

Pay special attention to the firmware version of the watch: if you upgraded Redmi to Android 13/14, If the watch is left on the old firmware, you may have problems with notifications or health data. → Also, prepare your Mi Account beforehand, because without it, you can't use features like contactless payments or cloud backup.

Just as important to free up space on your smartphone: the Zepp app (formerly Mi Fit) weighs in ~150 MB, plus it creates a cache for storing training statistics. If Redmi has less than 1 GB of free space, the synchronization can be interrupted. Optimally have a margin of 2-3 GB for comfortable work.

Installation and configuration of the Zepp application

The official Amazfit watch management app is Zepp (pre-2020, called Mi Fit), which can be downloaded from Google Play or AppGallery, but for Redmi owners, there is a nuance: in some regions (for example, in Russia), the app may not be in the Play Market due to sanctions restrictions.

• 📱 Download. APK-file from the official Zepp website (check the hash amount of the file for security).
• 🔒 Allow installation from unknown sources in Settings → Annexes → Special access rights → Installation of unknown applications.
• 🔄 After installation, update the application via Zepp Settings → About the program to avoid synchronization errors.

When first launched, Zepp will request access to:

• 📍 Geolocation – for accurate tracking of jogging routes.
• 📱 Notifications – to transmit messages from the phone to the clock.
• 🏃 Health Data (Google Fit) – for integration with other fitness services.
• 📞 Contacts – to display the names of the callers on the screen of the clock.

⚠️ Note: If you deny access to notifications, the watch will not be able to show incoming messages from WhatsApp, Telegram or other sources. SMS. This section can be configured later in the phone settings → Annexes → Zepp → Rights. → Notifications.

Turn-based clock synchronization with Xiaomi Redmi

When the Zepp app is installed and configured, switch to the clock connection. Turn on Bluetooth on Redmi and follow the instructions:

1. Press the button on the Amazfit watch for 3 seconds to activate pairing mode (on the screen will appear). QR-search-code).
2. In the Zepp app, click + Add the device → Choose your watch model from the list.
3. Hold the watch to the phone at a distance of less than 10 cm – this will speed up detection.
4. Confirm pairing on both devices (watch may require input) PIN-code, usually 0000 or 1234).
5. Wait for the data synchronization to be completed (the process takes from 2 to 10 minutes depending on the volume of statistics).

If the clock is not set, try:

• 🔄 Reboot Bluetooth on Redmi (disable/enable in the Quick Settings Panel).
• 📱 Remove the watch from the list of associated devices in Settings → Connected devices → Bluetooth and repeat the search.
• 🔋 Make sure the clock is over 20% (at low battery levels, some models refuse to connect).

Bluetooth on your phone

The clock is over 20% charged.

The latest version of Zepp is installed

The watch is next to the phone (less than 50 cm)

Power saving mode on Redmi is turned off-->

Set up notifications and calls

By default, Amazfit only shows notifications from system applications (Calls, SMS) to add instant messengers or social networks:

1. Open Zepp. → Choose your watch → Notifications of annexes.
2. Activate the Allow Notifications switch.
3. In the list, select the desired applications (for example, Telegram, VK, Gmail).
4. Set up the alert style: 📬 Full text – shows the entire message (can crop long texts). 🔔 Title only – only displays the sender’s name. 🚫 No vibration – the notification will appear on the screen, but the clock does not vibrate.

For incoming calls, set up:

• 📞 Deflection of call – swipe left on the watch screen.
• 🔕 Silent mode – swipe right (works only for calls, not alarm clocks).
• 🎵 The vibrating melody - in Zepp → Settings of the device → Calls.

⚠️ Attention: Redmi with MIUI 14+ This can trigger battery optimization, which causes notifications to arrive late. To fix this, add Zepp to your Settings list. → Battery → Optimizing the battery → All applications → Zepp → No restrictions.

Optimizing fitness tracking and health

One of the key benefits of Amazfit is that it can accurately monitor activity, so that the data is as accurate as possible:

• 🏃 Pedometer calibration: Walk 20 steps with your phone in hand, then check the matching data in Zepp and Google Fit. If you diverge more than 10%, calibrate to Profile → Settings → Health data → Calibration of steps.
• ❤️ Pulsemeter setting: To accurately measure heart rate, wear the clock 2-3 fingers above your wrist and fasten the strap tightly. → Select the frequency of measurements (every 1, 5, 10 or 30 minutes).
• 💤 Sleep tracking: Activate Do Not Disturb on the bedtime clock to avoid false wakes from notifications. Sleep phase data (deep, light, REM) Update to Zepp 5-10 minutes after waking up.

For sports training:

• 🏊 Profile selection: Zepp has over 150 activities, from running to yoga. Select Pool or Open Water (Amazfit watch) GTR 4 and newer support measurement SWOLF).
• 📊 Data analysis: After training, the app displays heart rate zones, calories, pace and route map (if enabled) GPS). For detailed analysis, export your data to Strava or Apple Health.

💡

If the Amazfit watch does not fix the workout, check if Redmi has activated the power saving mode for the Zepp app. Also make sure that the watch settings enable Activity Auto Determination (for models with support). AI-algorithm).

Solving common problems

Even after a successful connection, Xiaomi Redmi and Amazfit users are faced with typical bugs.

1.The clock is constantly off the phone

Possible causes:

• 📶 Weak Bluetooth signal: Redmi Note's metal case or magnet case can shield the signal.Remove the case or move the phone closer to the clock.
• 🔋 Energy conservation MIUI: Put Zepp into No Limits mode (see instructions above).
• 🔄 Conflict with other gadgets: If you have headphones or a fitness bracelet connected to your phone, try turning them off.

2 Health data are not synchronized

Check it out.

• 📱 Permissions for Zepp: In Settings → Annexes → Zepp → Rights must be active items Bodybuilding and fitness and Physical activity.
• 🔄 Firmware update: Outdated watch software may not support new data formats. Update firmware via Zepp → Device profile → Update of the PO.
• 🌐 Internet connection: Cloud sync requires stable Wi-Fi or mobile internet.

3.The watch discharges quickly

Amazfit models on the Zepp platform OS (for example, GTR 4 or Cheetah) when connected to Xiaomi Redmi can lose up to 20% of charge per night due to background synchronization with Mi Account:

• ⚡ Turn off Auto Sync in Zepp settings (leave manual sync only).
• 📴 Reduce your heart rate to every 30 minutes.
• 🌙 Activate Battery Savings on the Watch (turns off the screen always on).

Additional features: payments, music, weather

Modern Amazfit supports features that go beyond fitness tracking, and here’s how to set them up on Xiaomi Redmi:

💳 Contactless payments (NFC)

To use Mi Pay or Alipay:

1. Add a bank card to Zepp (Profile) → Payments → Add a map).
2. Activate. NFC on the watch (some models require a binding to the Mi Account).
3. To pay, bring the clock to the terminal and confirm the transaction with the press of a button.

Restrictions: In Russia, the feature may not be available due to sanctions, with the alternative being linking a card to Google Pay on a phone and using a watch to confirm payments.

🎵 Managing music

The Amazfit watch can:

• 🎧 Manage playback on the phone (pause, next track, volume).
• 📱 Store music locally (up to 3GB on memory models:

1. Connect the watch to the PC via cable (requires an adapter if the connector is not available) USB-C).
2. Copy files in format.mp3 or.m4a to the Music folder on the clock.
3. In Zepp, update the media library (Device settings) → Music).

☀️ Weather widget

To display the forecast on the clock:

• Enable geolocation on Redmi.
• In Zepp, go to Device Settings → Weather. → Data Source and Select AccuWeather or Meteum.
• Update the data by pulling the weather screen down on the clock.

💡

For a stable job. NFC-Payments on Amazfit link the watch to the same Mi Account as the Xiaomi Redmi phone.

FAQ: Frequent questions about setting up Amazfit and Xiaomi Redmi