Xiaomi wireless headphones are a popular accessory that combines convenience, sound quality and affordable price. However, even such simple devices require the right handling to unleash their full potential. Many users face problems: headphones fall out, poorly held in their ears, quickly discharge or emit a fuzzy sound. Often the reason lies not in marriage, but in improper use - starting with the process of putting on.
In this article, we will discuss how to properly wear Xiaomi wireless headphones (including AirDots, Buds, FlipBuds and others) so that they sit tight, do not cause discomfort and last longer. You will learn about the choice of size of the helmets, the features of the ear anatomy, Bluetooth settings and even how to avoid losing headphones. And if you are only planning to buy, at the end of this article there are tips for choosing a model for your needs.
Why it is important to wear Xiaomi headphones correctly
It would seem that it is difficult to put headphones in your ears, but in practice it depends on:
- 🎵 Sound quality – loose fit leads to bass leakage and distortion of high frequencies.
- 🔋 Running time – if the headphones are constantly falling out, you will turn Bluetooth on/off more often, which consumes the battery.
- 🚀 Connection stability – some Xiaomi models automatically turn off if the detect sensor does not detect wear.
- 🩺 Comfort – improper landing can cause ear pain after 30+ minutes.
In addition, many models (for example, Xiaomi AirDots Pro 2 or Buds 4 Pro) are equipped with noise reduction system. ANC. If the headphones are not tight, this function works worse, and you will not get the promised effect of immersion in music.It is also worth considering that during active movements (running, training), improperly worn headphones can fall out and get lost.
⚠️ Note: If you use Xiaomi headphones with touch controls, poor-quality fit can lead to false positives (for example, accidental missing track when adjusting position).
Preparation before first use
Before you put on your headphones, follow a few simple steps:
- Check the package. The box should have: 📦 The headphones and the case for charging. 🔄 Set of replacement embushures (usually 3 sizes: S, M, L). 📑 Instructions (sometimes with QR-Download the Mi Home or Xiaomi Wear app). 🔌 Charging cable (USB-C microUSB, depending on the model).
Charge the headphones.
green
red
Activate Bluetooth on your smartphone.
Mi TrueWireless
AirDots 3 Pro
If you bought used or unpacked headphones, be sure to reset them to factory settings.
- Put both earphones in the case.
- Open the case lid.
- Press and hold the button on the case (usually located behind) for 10-15 seconds until the indicator flashes red and white.
How to choose the right size of ambushes
Ambushes (or "inlays") are silicone nozzles that ensure that the headphones fit tightly to the ear canal. Complete with most Xiaomi models, there are three size nozzles: S (small), M (medium), and L (large), the right size is the key to comfort and quality sound.
To determine your size:
- Take an M sized earpiece (it's usually already on headphones).
- Carefully insert the earpiece into the ear and slightly twist it so that it sits deeper.
- If you feel discomfort or the headphone falls out when you move your head, try the size S.
- If the earphone sits too loose and doesn’t block out external sounds, try the L-size.
A simple test can be used to check the density of the fitting:
- 🎧 Put on your headphones and turn on the music at medium volume.
- 👂 If the sound hasn't changed much, the fit is good. If the sound has become much quieter, the masks don't fit.
| Size of ambushures | Who's right for? | Features |
|---|---|---|
| S (Small) | Teenagers, people with narrow ear canal | May cause discomfort with prolonged wearing |
| M (Medium) | Most adults (standard size) | Optimal balance between comfort and sound insulation |
| L (Large) | People with wide ear canals | Better sound insulation, but can press on long-term use |
⚠️ Note: If neither size fits perfectly, consider buying third-party earpieces (like SpinFit or Comply Foam.
☑️ Checking the correctness of the choice of ambusheries
Step-by-step: how to properly wear headphones Xiaomi
Now, let's get to the process itself. The instructions are suitable for most models, including Xiaomi AirDots, Buds. 3/4 Pro, FlipBuds and Redmi Buds.The differences may only be in the shape of the case, but the principle remains the same.
- Take the headphones out of the case. Open the case cover, the headphones should automatically turn on (the indicator blinks). If this does not happen, press and hold the touchpad on each earphone for 2-3 seconds.
- Identify right and left earphone. Most Xiaomi models have markings: 🅿️ R (Right) - right. 🆇 L (Left) - left.
If there is no marking, pay attention to the shape: the right earpiece usually has a more elongated tail for the microphone.
Orient the earpiece correctly.
Xiaomi headphones are asymmetrical in shape. The socks should be pointed upwards and slightly backwards, repeating the bend of the ear. Don't try to insert them into the forehead, this will lead to discomfort.
Put the earpiece in at an angle.
Carefully take the earpiece with two fingers, slightly pull the earlobe down (to open the ear canal), and insert the earpiece at an angle of 30-45 degrees to the head. Then scroll it back slightly so that the earbud sits tightly into the ear canal.
Check the density of the fit.
Once the headphone is down, pull it down a little -- if it doesn't fall out, it's okay. Repeat the procedure for the second headphone.
Set the position for maximum comfort.
After both headphones are worn, slightly move your jaw (as when chewing) - if there is no discomfort, you can start listening.
Critical: If you use headphones with active noise cancellation (ANC), After you put on, turn on this mode and see how well the external sounds are blocked. If the effect is weak, try a different size of earpieces or adjust the position of the headphones.
💡
If your headphones keep falling out when you're running, try putting them back-to-back, which sometimes makes it a tighter fit, but remember that in this case, the sensory control may not work properly.
Frequent Mistakes When Wearing and How to Avoid Them
Even experienced users sometimes make mistakes that spoil the experience of headphones.
- 🔄 The earphone's orientation is wrong. If you put it upside down, the sound will be distorted, and the microphone will not correctly pick up the voice.
- 🤏 Too much pressure when you put it on. You don't have to put it in your ear, because it can damage the earpiece or cause pain.
- 🎛️ Ignoring the earlobe, if you don't pull the earlobe down, the earphone won't sit deep enough.
- 🔊 Using headphones without a suit, and many people leave standard headphones even if they don't fit.
- 📱 Untimely phone connection: Put your headphones on first and then connect them to your device to avoid Bluetooth crashes.
Another common problem is the different volume levels on the headphones, which can be due to:
- A loose fit of one of the headphones.
- Pollution speaker or ambushes (dust, earwax).
- Failures in Bluetooth settings (for example, if the smartphone activated the “Mono” mode).
If the problem doesn’t go away after checking the landing, try resetting your headphone settings (the instructions were given above) or updating your firmware through the Xiaomi Wear app.
What to do if one headphone is not connected?
Additional settings for better sound
Getting the right wear is only half the success. To make Xiaomi headphones sound perfect, you should customize them through a branded app. For most models, Xiaomi Wear (formerly Mi Home) is suitable. You can download it from Google Play or the App Store.
After connecting headphones to the application, you can:
- 🎛️ Set up an equalizer. Select a preset profile (Bases, Vocals, Balance) or create your own.
- 🔇 Activate ANC In noise-canceling models (e.g. Buds 4 Pro), you can adjust the intensity. ANC.
- 🔄 Reassign touch gestures, such as setting up a double touch to skip a track or call a voice assistant.
- 🔋 View the charge level. The app shows the charge of each earphone and case separately.
For supported models LDAC (For example, FlipBuds Pro in Bluetooth settings on your smartphone, select Audio Quality – this will improve detail, but can slightly increase latency.
| Setting up | Recommended value | What do you need? |
|---|---|---|
| equalizer | Balance or Bass+ | Optimal sound for most genres of music |
| ANC (noise reduction) | Medium (for office), Maximum (for transport) | Suppression of the background without discomfort in the ears |
| Transparency regime | Double-touch switch on | Hear sounds quickly (for example, outside) |
| Bluetooth codecs | AAC (iPhone), LDAC (Android) | Best sound quality without breaks |
⚠️ Note: If you use Xiaomi headphones with iPhone, some features (e.g., some features, LDAC or advanced settings ANC) This may not be available due to iOS restrictions, and it is recommended to use a codec. AAC.
💡
For maximum sound, always update the headphone firmware through the Xiaomi Wear app. The manufacturer regularly releases updates that improve communication quality and autonomy.
How to Care for Xiaomi Headphones to Last Longer
Proper care extends the life of headphones and preserves the sound quality.
- 🧼 Clean the earbrushes and case. Every 1-2 weeks, wipe them with a soft cloth moistened in alcohol solution (at least 70%). To remove earwax from the speaker grille, use a dry toothbrush with soft bristles.
- 💧 Avoid moisture, even if your model is protected. IP54 or IPX4, Don't wear headphones in the rain or in the shower. After exercise, dry them in the air for 10-15 minutes before putting them in the case.
- 🔋 Keep your headphones running low for a long time, which shortens battery life, and keep them in a 40-60 case%.
- 🧲 Avoid strong magnets. Do not place the case near powerful magnets (such as speakers or induction charges) - this can damage the speakers.
- 🌡️ Don't overheat or cold. Don't leave your headphones in the sun (like in a car in the summer) or in the cold below. -10°C.
If the embroideries have lost elasticity or ruptured, replace them. Silicone nozzles wear out in about 6-12 months of active use. Xiaomi models are suitable for universal embusheries with a diameter of 4-6 mm (require the exact size for your model).
If the headphones stopped holding charge or started spontaneously turning off, this may indicate battery wear. In this case, contact the Xiaomi service center - some models support battery replacement.