How to wear Xiaomi wireless headphones: instructions for all models

Xiaomi’s wireless headphones have gained popularity with a combination of affordable prices, high-quality sound and easy-to-use ergonomics, but even with these seemingly simple devices, users often have questions: How do you put them in your ears so they don't fall out and provide maximum sound insulation? This is especially true for owners of open-plan models (e.g. Redmi AirDots 3) or for those who are switching from wired headphones to headphones for the first time. TWS-headset.

In this article, we will analyze not only the basic principles of wearing Xiaomi headphones, but also the nuances for specific models – from the budget Redmi Buds 3 Lite to the flagship Xiaomi Buds 4 Pro. You will learn how to find the right size of the earpieces, avoid discomfort during prolonged wearing and even how to check whether the headphones are sitting in the ears. And for those who face problems with connection after putting on, we have prepared a separate section with tips for troubleshooting.

Why it is important to wear wireless headphones correctly

Sound quality and comfort are directly dependent on how tight the headphones fit into the ear canal. 3T Pro with support for active noise reduction (ANC) If you land wrong, you can wipe out all the benefits of the technology -- external noises will get in and the bass will lose depth:

• 🎵 Sound distortion: When fitted poorly, high frequencies become sharp and low frequencies become blurred".
• 🔋 Battery discharge: if microphones ANC They can’t properly analyze the surrounding noise, headphones spend more energy on suppressing it.
• 🚶 Loss on the move: Even a light run can be a problem if the headphones are not fixed correctly.
• 🦻 Discomfort: pressure on the cartilage of the ear leads to headaches with prolonged wear.

Xiaomi engineers take into account the anatomical features of the ears when designing headphones, but there is no universal solution. For example, Redmi Buds 4 Active uses earpieces with 3 sizes, and Xiaomi FlipBuds Pro uses special wings for additional fixation.Ignoring these features leads to 70% of user complaints about sound quality in the first week of use.

⚠️ If you feel pain or pressure in your ears 20-30 - if you are wearing it, remove your headphones immediately, this may indicate an inappropriate size of the earpieces or an allergic reaction to the material (silicone/foam).

Preparing headphones for the first use

Before you wear new Xiaomi headphones, follow a few mandatory steps to avoid typical problems like bad sound or quick discharge:

Replace the bottles with the appropriate size (usually included) 3 variant: S/M/L)

Charge the case to 100% (the indicator on the front panel should burn green)

Update your firmware through the Mi Home app or Xiaomi Earbuds

Check compatibility with your smartphone (for the first time) ANC Android required 8.0+/iOS 12+)

Clean your headphones and earbuds with alcohol wipes (remove factory lubricant)

-->

Pay special attention to the choice of earpieces. Xiaomi Buds 4 and later use oval nozzles that are better adapted to the shape of the ear than round ones.

1. Try to wear headphones with a M nozzle (Medium) - it is installed by default.
2. If you feel the earphone is “swapping”, try the size L (Large).
3. If you have too much pressure or pain, switch to S (Small).
4. To check the density of fitting, close your ear with an earphone with your palm - if the sound becomes much quieter, the landing is correct.

Xiaomi Buds 3 Pro and later uses adaptive sealing technology, which automatically adjusts to the shape of the ear during the first 5 minutes of wearing. Do not remove the headphones during this period, even if you feel slight discomfort.

Redmi AirDots (1-3 generation)

Xiaomi Buds 3/3T/3T Pro

Xiaomi Buds 4/4 Pro

Redmi Buds 4 Active/Lite

Another model

I haven't bought it yet.

-->

Step-by-step: how to properly wear headphones Xiaomi

The algorithm is the same for most models, but there are nuances for stem-shaped headphones (like the Xiaomi Buds 4 Pro) and liners (like the Redmi Buds 3 Lite).

For models with stem (AirDots, Buds) 3/4 Pro)

1. Identify right and left earphone: usually on the case there are markings R (right) and L (left). In Buds 4 Pro, the right earphone also has a touch button.
2. Place the earpiece at an angle of 45° The stem should look forward and slightly down.
3. With a slight movement, press the earpiece into the ear, then scroll it slightly clockwise (for the right ear) or against (for the left ear), which helps the earbud sit tighter into the ear canal.
4. Release the earpiece, it should stick to the ear. If that doesn't happen, repeat step 3 with great effort.

For In-Line Models (Redmi Buds, FlipBuds)

1. Pull the earlobe down with your free hand - this will widen the ear canal.
2. Insert the earpiece into your ear and slightly press your finger on it until you feel the “click” (this means that the earpiece has taken the correct position).
3. Let go of the earlobe, the earpiece should stay in place. If it falls out, try the size of the earpieces larger.
4. For models with wings (such as FlipBuds Pro), fix them on the cartilage of the ear, as shown in the diagram in the instructions.

After wearing, check the sound quality:

• 🎧 Turn on a deep bass track (like "Seven Nation Army" - The White Stripes) if the bass "bubbles" or goes missing, the landing is wrong.
• 🗣️ Activate transparency mode (if any) If the surrounding sounds are clearly heard but without distortion, the headphones sit correctly.

💡

If headphones constantly fall out when running, try to wear them “back-to-back” – some users note that such a landing is better fixed when active movements.

Features of wearing for popular Xiaomi models

Each Xiaomi headphone series has unique design features, and we’ve collected key points for the most common models:

For hybrid models ANC (For example, Xiaomi Buds 4 Pro) after wearing, it is recommended to run a leakproofness test in the Xiaomi Earbuds app. The algorithm analyzes how well the headphones block external noise, and suggests adjusting the landing. If the test result is below 80%, try it:

• 🔄 Change the size of the bottles to a size larger or smaller.
• 🌀 Repeat the scroll of the earpiece in the ear.
• 🧴 Apply a little Vaseline to the edge of the ambusheure (improves fitting).

Frequent Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes when wearing Xiaomi headphones, and here are the most common ones and ways to fix them:

⚠️ If after wearing headphones Xiaomi Buds 4 Pro emit high-frequency squeak in mode ANC, This means that the noise-cancellation microphones are blocked by hair or dirt!).

• 🔊 Too loud when first turned on: Many models (Redmi AirDots 3, Buds 3 Lite) have a factory volume setting of 80%. Reduce it to 50% in the Bluetooth device settings on your smartphone.
• 📱 Headphones do not connect after putting on: check that they are removed from the case (in Buds 4 Pro there is a Hall sensor – the headphones do not turn on if the case is closed.
• 🌀 One earpiece sounds quieter than the other: it's a sign of a wrong fit. Take off both earbuds, clear the earwax and put it back on, paying attention to scrolling.
• 🔋 Fast discharge: if ANC It's on, and the headphones don't sit well, and the battery goes down 2 times faster. Turn off noise reduction or go to larger earbuds.

Another common problem is the echo in the microphone when you're calling, which happens when the headphones are sitting too deep and the microphone (located on the stem) is covered by the ear.

1. Slightly pull the earpiece from the ear, without violating the tightness of the earpiece.
2. Turn the stem so that a microphone (a small hole) is directed towards your mouth.
3. In Buds models 3T Pro and newer in the application settings has the option “Improving voice” – turn it on.

How to check if the headphones are sitting correctly

Even if the headphones don't fall out, it doesn't guarantee a perfect fit, here are 5 tests to help you gauge the quality of the fixation:

1. Pressure test: Turn on the music at medium volume. Close your ear with your earpiece. If the sound is much quieter, the fit is correct. If it doesn't change much, the earpiece is too big or too small.
2. Motion test: Shake your head from side to side. If the headphones are shifting or you feel like they're about to fall out, try a different size of the earpieces or adjust the angle of insertion.
3. Test ANC (for supported models: Settings → Xiaomi Earbuds → Noise reduction test Result above 85% considered, 70-85% — acceptable 70% — adjustment required.
4. Microphone test: Record a voice message. Listen to the recording: if your voice sounds muffled and the surrounding noises are too loud, the microphone is covered by the ear.

Comfort test

• Wear headphones for 30 minutes without a break.
• If you feel pressure or pain, replace the hoods or try wearing them from a different angle.

Xiaomi Buds 4 Pro and FlipBuds Pro have a built-in wear sensor that detects whether the headphones are sitting correctly. If a "check board" notification appears after you wear it, follow the instructions on the screen.

• 🔄 Repeat the scroll of the earpiece in the ear.
• 📏 Choose a different size of ambusheries.
• 🎧 Take the leakproofness test again.

💡

If your headphones are still not sitting well after all the tests, try third-party memory foam earbuds (such as Comply Foam), which are more expensive than silicone ones, but provide better sound insulation and comfort for long-term wear.

Care and storage tips

Proper care of Xiaomi headphones not only prolongs their life, but also affects the quality of the fit.

• 🧼 Clean the bottles: once a week, wash them with warm water and soap, then dry them for 24 hours (not in a case.
• 🔋 Case charging: don't leave headphones in a discharged case for a long time - this reduces battery life — 40-60%.
• 🌡️ Temperature: Avoid storing headphones above 40°C (for example, on the sunny side of the window sill) or below 0°C.
• 🎧 Storage: Always put your headphones in the case with the contacts down (the Buds 4 Pro has magnetic guides that help you position them correctly).

Pay special attention to the holes of microphones (in models with a ANC). Clogging with dust or earwax leads to:

• Deterioration of noise reduction quality.
• The appearance of hissing or wheezing in speakers.
• False positives from the voice assistant.

Use:

• 🧵 Soft toothpick (to remove sulfur from holes).
• 💨 A compressed air canister (for blowing out dust).
• 🧴 Cotton swab soaked with alcohol (only for external surfaces!).

⚠️ Warning: Never use sharp objects (needles, pins) to clean microphone holes.This can damage the safety net and cause moisture to enter the body.

FAQ: Answers to Frequent Questions