How to set up the equalizer in Xiaomi wireless headphones: the full guide

Xiaomi’s wireless headphones are not only a stylish accessory, but also a powerful tool for listening to music, podcasts or sound in games. However, even the most advanced models like Xiaomi Buds 4 Pro, Redmi Buds 5 or Xiaomi FlipBuds Pro often sound “not” as you would like: too many basses, muted voices or sharp high frequencies, all of which can be corrected with an integrated or third-party equalizer, a tool that allows you to point-to-correct your sound profile.

In this article, we will analyze how to configure the equalizer for different models of Xiaomi headphones, what programs to use for this (including the proprietary Mi application). Fitness/Xiaomi Wear and third-party solutions like Wavelet or Poweramp, and we will give recommendations for customization for specific genres of music, and we will pay special attention to compatibility issues - why the equalizer may not work on some smartphones and how to get around it.

If you’ve never used an equalizer, don’t worry: we’ll explain all the terms in plain language, and for experienced users, we’ve prepared advanced tips – for example, how to save custom presets or synchronize settings between devices.

What Xiaomi headphones support equalizer setting

Not all Xiaomi wireless headphones allow flexible audio tuning, but here are the key criteria by which you can determine whether your model has equalizer support:

• 🔹 Flagship series: Xiaomi Buds 3/4 Pro, FlipBuds Pro, AirDots Pro 2/3 — have built-in presets and manual settings in the proprietary application.
• 🔹 Midsize segment: Redmi Buds 4/5, Xiaomi Buds 3 — support basic presets (for example, Bass, Voice, Balance), but without a detailed correction.
• 🔹 Budget models: Redmi Buds 3 Lite, Xiaomi AirDots 2 - equalizer is missing, but you can use third-party apps on your smartphone.
• 🔹 Gaming headsets: Xiaomi Gaming Headset – often have separate software with advanced sound settings.

To find out if your model has an equalizer, check:

1. The official product page on the Xiaomi website (the "Features" section).
2. Availability of the Equalizer tab or Sound Effects in the Mi app Fitness/Xiaomi Wear.
3. Compatible with equalizer apps from Google Play (e.g. Wavelet or Equalizer) FX).

Important: Headphones with codec support LDAC or AAC (For example, Xiaomi Buds 4 Pro usually better transmit equalizer adjustments than models with a high-end model. SBC. This is because advanced codecs retain more sound detail after processing.

Methods of equalizer configuration: proprietary software vs third-party applications

There are two main ways to customize the equalizer for Xiaomi headphones: through the official brand app or using third-party programs. Each option has pros and cons.

If your headphones support a branded equalizer, start with it - this is the most reliable way. For example, in Xiaomi Buds 4 Pro you can choose from 12 presets or manually adjust 5 bandwidths.

1. Open the Xiaomi Wear app (or Mi Fitness for older models).
2. Connect the headphones to your smartphone.
3. Go to the Device section → Sound settings → equalizer.
4. Select preset or press Set up manually.

If you don't have a branded equalizer or it's not enough, use third-party apps.

• 🎵 Wavelet – supports automatic correction for your headphones (there is a database of profiles).
• 🎵 Poweramp Equalizer – integrates with the player, has a 10-band equalizer.
• 🎵 Equalizer FX — Simple interface, works with most headphones.

💡

Before installing a third-party equalizer, turn off branded sound effects in your smartphone settings (Settings) → Sound. → Sound effects. It avoids conflict and distortion.

Step-by-step setting up the equalizer for different genres of music

There is no universal “perfect” equalizer – the settings depend on the genre of music, the characteristics of the headphones and your preferences. Below are basic recommendations for popular destinations.

🎸 Rock and metal

For rock music, it's important to emphasize guitars and drums, but not to drown out vocals.Recommended settings (for a 5-band equalizer):

• 60 Hz (bass): +2 dB (for heavy bass guitars).
• 250 Hz (lower average): 0 dB (so as not to "dirty" the sound).
• 1 kHz (medium): +1 dB (for vocals and solo guitar).
• 4 kHz (upper average): +2 dB (for clarity of guitar riffs).
• 16 kHz (high): -1 dB (to reduce hissing).

🎤 Pop and vocals

Here, the priority is pure voice and balanced bass.

• 60 Hz: +1 dB (light basses).
• 250 Hz: -1 dB (remove "drumping").
• 1 kHz: +3 dB (select vocals).
• 4 kHz: 0 dB.
• 16 kHz: +1 dB (for "air" in track).

🎧 Electronic music (EDM, house, trance)

Electronic genres are critical for strong bass and clear high frequencies.

• 60 Hz: +4 dB (deep bass).
• 250 Hz: -2 dB (remove dirt).
• 1 kHz: 0 dB.
• 4 kHz: +1 dB (for synths).
• 16 kHz: +2 dB (for high hats).

Tip: Use test tracks to customize, like "Bohemian Rhapsody" (Queen) -- it covers a wide range of frequencies, which will help you gauge the balance.

Common Problems and Their Solutions

When setting up an equalizer, users often face typical problems, and let's look at the most common ones and how to fix them.

⚠️ Warning: If the equalizer settings change, the sound becomes quieter or distortions appear, reset to the factory settings and start again).

Problem 1: The Equator does not save the settings

This is a frequent complaint of users Xiaomi Buds 3 and Redmi Buds 4.

• 🔄 Headphone reset: Press the button on the case of the charging case for 10 seconds, then reconnect to the smartphone.
• 📱 Cleaning the app cache: Go to Settings → Annexes → Xiaomi Wear → Warehouse → Clear the cache.
• 🔄 Firmware Update: Check for updates in the Xiaomi Wear app.

Problem 2: Sound is distorted at high frequencies

This happens if you raise the 16 kHz band too much or use a low-quality codec (for example, a high-quality codec, SBC). Decisions:

• 🎛️ Reduce high frequency levels by 1-2 dB.
• 🔗 Switch to codec. AAC or LDAC in Bluetooth settings (Settings) → Connected devices → Headphones → Audio codec).
• 🔊 Turn off the environmental effects (such as Dolby Atmos) if enabled.

Problem 3: The Equalizer does not work with third-party apps

Some apps (like Spotify or YouTube Music) ignore the system settings of the equalizer.

• 🎵 Use a player with a built-in equalizer (e.g. Poweramp or Neutron Music Player).
• 🔧 Install Wavelet and enable System Equalizer (requires permission to change sound).
• 📱 On Xiaomi smartphones, turn off MIUI Sound Enhancer in Settings → Sound. → Sound effects.

Advanced Settings: How to Create the Perfect Sound

If you want to get the most out of your headphones, try these advanced techniques:

1. Automatic correction with Wavelet

Wavelet can automatically select the equalizer settings for your headphone model.

1. Install Wavelet from Google Play.
2. Select your headphone model in the database (e.g. Xiaomi Buds 4 Pro).
3. Activate the AutoEQ option - the program will select the optimal settings.

Advantage: AutoEQ uses measurement data from professional hardware, so the sound becomes balanced without manual tuning.

2. Synchronize settings between devices

If you use headphones with several gadgets (for example, a smartphone and a tablet), you can synchronize the presets of the equalizer:

• 📱 In Xiaomi Wear, export the settings to the file (if the function is supported).
• 🔄 In Wavelet, use a cloud backup (Settings) → Imports/Exports).
• 🎵 In Poweramp, save the preset in.peq and transfer it to another device.

3. Customization for games and movies

For games and movies, you need different settings than for music.

• 🎮 Games: Raise 100-200 Hz (for explosions and steps) and 8-16 kHz (for environmental sounds) Reduce the average frequencies so you don't drown out important sounds.
• 🎬 Movies: Increase 250–500 Hz (for dialogue) and slightly raise 60 Hz (for soundtrack).

💡

For games and movies, turn off spatial sound (like Dolby Atmos) in the headphone settings – it can conflict with manual equalizer settings.

How to check the sound quality after setting up

After changing the equalizer settings, it's important to make sure the sound is better, not worse.

1. Test tracks

Use special audio files to check the frequencies:

• 🔊 Bass: Low frequency track (e.g., "Seven Nation Army" by The White Stripes).
• 🎤 Medium: Acapel songs (e.g., "Hallelujah" by Jeff Buckley).
• 🎛️ High: High hat track (for example, "Around the World" by Daft Punk).

Verification for distortions

Too high settings at certain frequencies can lead to distortions.

• 🔊 Bass "wheezing" or "dumbing" - reduce the level by 60-100 Hz.
• 🎵 High frequencies cut the ear – lower 8–16 kHz.
• 🎤 The voice sounds muffled - check the settings for 1-4 kHz.

Comparison with factory presets

Go back to the factory settings and compare the sound. If your preset sounds worse, go back to the setup and adjust the bands.

💡

The perfect equalizer is not the one that is "the right one in science," but the one that you like. Don't be afraid to experiment!

FAQ: Frequent questions about the equalizer in Xiaomi headphones