Honor Band 4 and Xiaomi: How to make friends

Compatibility of gadgets from different manufacturers often raises questions among users, especially when it comes to the popular bundle of Honor Band 4 and Xiaomi smartphones. Despite the fact that both brands have Chinese roots and use similar ecosystems, the process of primary pairing can have its own nuances that must be considered for stable operation.

The main challenge is choosing the right software, as standard methods for finding Bluetooth devices in Android settings don’t work here.You’ll need a dedicated app that will bridge the fitness tracker and the MIUI or HyperOS operating system.

In this article, we will take a closer look at every step, from preparing gadgets to fine-tuning notifications so you can fully use all the features of your tracker. We will look at the features of the background processes on Xiaomi smartphones, which often block the work of third-party applications, and how to fix it.

Preparation for interconnection of devices

Before you start the active phase of the connection, you need to make sure that both devices are ready for communication, which is a basic step, ignoring which in 90% of cases leads to search errors or the inability to complete the registration of the device in the system.

First of all, make sure your Honor Band 4 has a charge. If the tracker has been idle for a long time, put it on charge for at least 15-20 minutes. Also check if Bluetooth is on on on your Xiaomi smartphone, and make sure that geolocation is activated, as modern versions of Android require this to work Bluetooth scans.

A critical point is to clear your connection history, and if you've tried to connect the bracelet to this or another phone before, be sure to remove it from the list of paired devices in your Bluetooth settings, which will avoid protocol conflicts.

• 🔋 Charge the Honor Band 4 minimum 20-30% for stable work during the setup.
• 📶 Turn on Bluetooth and GPS (geolocation) on a Xiaomi smartphone.
• 🗑️ Remove old bracelet entries from Bluetooth menu if they are there.
• 📱 Make sure your smartphone is connected to a stable Wi-Fi or mobile internet network.

⚠️ Warning: Don’t try to pair solely through the standard Bluetooth menu in Android settings.This will cause a connection error and the device may lock up for repeated attempts for a while.

Selecting and installing the right application

For Xiaomi smartphone owners, the choice of the app is a key point. For a long time, the main tool was the Huawei Wear app, but in the future, the app is a very important tool for the company. 2026-2026 In recent years, the priority has shifted to a more universal solution, Huawei Health, which provides full compatibility with the Honor Band. 4 and the correct operation of all functions.

The problem may arise with finding an application in the Google Play Market, as due to the sanctions restrictions of Huawei and Honor, some services may not be available or work incorrectly depending on the region of the account. QR-code that appears on the tracker screen when first turned on, or search for the installation file APK official website.

Once you install the app, you'll need to create a Huawei ID or log in to an existing account, and without authorization, the app's functionality will be severely limited, and data synchronization will become impossible, a mandatory step in the ecosystem that cannot be circumvented.

• 📲 Download the Huawei Health app from a trusted source.
• 🆔 Register a new Huawei ID Or log in to an old account.
• 🌍 Select the right region when you first launch (usually Russia or Kazakhstan).
• 🔒 Give all requested permissions to access data and devices.

Connecting Honor Band 4 to Xiaomi

Once installed and first configured, Huawei Health can go directly to pairing devices. The app interface is intuitive, but has its own features specific to Huawei products.

Open the app and go to the Devices tab. Click on the big plus in the top right corner or the Add button. The app will start scanning the gadgets available nearby, at which point a confirmation pairing request may appear on the tracker screen — click the tick.

When Honor Band 4 appears on the list, click on it. Confirmation codes will appear on your smartphone screen and on your bracelet display. Make sure they match and confirm the action. The process of setting profiles and syncing time will begin, which can take from 30 seconds to 2 minutes.

It is important not to interrupt the process and keep the devices at a distance of no more than 1 meter from each other. Upon successful completion, the bracelet will suggest updating the firmware if a new version is available.

💡

Successful pairing is possible only through the Huawei Health app, direct connection via the Bluetooth menu of Android is not supported and leads to errors.

Configure permissions and background work in MIUI

Xiaomi smartphones are famous for their aggressive energy saving policies, which often “kill” the background processes of applications, including Huawei Health.This leads to the bracelet no longer receiving notifications, loss of pulse history or reset communication.

To avoid this, you need to manually configure autorun and access rights. Go to Settings → Apps → All apps, find Huawei Health and go to “Other Permits” section, where you want to allow all points, especially access to location, phone and contacts.

Then turn on auto-start. In the same app settings menu, find Auto-Start and activate it. Without this step, after you reboot your smartphone, the app won't start itself and the sync will stop.

• 🚀 Turn on Auto Start for Huawei Health App.
• 🔋 In the battery settings, select No Limits mode for the tracker.
• 🔒 Allow access to contacts, SMS and call log for displaying notifications.
• 📍 Allow access to geolocation in “Always” mode for route tracking.

⚠️ Warning: If you have an all-day Saving Energy mode on, the system may ignore the application's customizations.It's recommended to add Huawei Health to the exceptions or not use a hard power saving mode.

Also, you should lock the app in memory. Open the menu of running applications (swipe from the bottom up and hold or menu button), find the Huawei Health window and press the lock. This will prevent it from unloading when the memory is cleared.

Set up notifications and tracker functions

After the technical setup comes the time for personalization. Honor Band 4 can display notifications from any apps installed on your Xiaomi, whether it’s messengers, social networks or email clients.

To activate this feature in the Huawei Health app, go to your device card, select “Manage Notifications” and activate the desired switches. Note that the notification text will only come if it appears in the Android notification curtain.

In addition, automatic pulse measurement, reminders of (prolonged immobility) and sleep monitoring can be enabled in the bracelet settings. It is important for Xiaomi users to know that synchronizing steps with Google Fit or Samsung Health is possible through third-party aggregator apps, as direct integration may not be possible.

Don't forget to set up the dial. In the Dials section, you can choose from a huge library of styles, including animated and with a lot of data, which makes using the gadget more enjoyable and informative.

• 💬 Include notifications for WhatsApp, Telegram and calls in the device menu.
• ⌚ Download a new dial to personalize the look.
• ❤️ Adjust the frequency of automatic pulse measurement (for example, every 10 minutes).
• 🌙 Activate sleep monitoring to track rest phases.

💡

To keep notifications coming in correctly, don't clear the notification curtain on your phone until the bracelet vibrates. Android sometimes delays data transfer if the notification disappears too quickly.

Addressing common problems

Even if all instructions are followed, there can be technical difficulties, and users often find that the wristband can't see the phone or loses connection all the time, and in most cases, the problem lies in the Bluetooth cache or software version conflict.

If the device is missing, try resetting the network settings on your smartphone (this won’t delete personal data, but will reset your Wi-Fi and Bluetooth settings) and reconnect the tracker. Also an effective method is to remove the app, restart the phone, and re-install Huawei Health.

Another common problem is time desynchronization: If the watch on the wristband is lagging or showing an incorrect time zone, check the time settings in the Huawei Health app itself and make sure that it is worth automatic synchronization with the network.

Remember that the maximum stable Bluetooth distance for Honor Band 4 is about 10 meters in open space, but walls and interference from Wi-Fi routers can significantly reduce this distance.

• 🔄 If you have a permanent connection break, try forgetting your Bluetooth device and creating a pair again.
• 🧹 Clean charging contacts once a month to prevent oxidation.
• 📡 Keep your phone and bracelet away from powerful sources of radio interference.

⚠️ Warning: Do not use the bracelet in saunas or hot baths, even if waterproof is declared.Vapor and high temperature can damage the screen adhesive layer and disrupt the tightness of the body.

Conclusion

Connecting Honor Band 4 to the Xiaomi smartphone is a process that is quite affordable if you know the correct sequence of actions and features of the MIUI operating system. The main thing is to use the current Huawei Health application and correctly adjust the background work so that the energy saving system does not interfere with the work of the tracker.

Compliance with our recommendations will allow you to enjoy the full functionality of the device: accurate activity tracking, health monitoring and timely notifications.