How to connect the headset Jabra to the smartphone Xiaomi: full instruction with photos and tips

Jabra wireless headphones have long proven to be reliable devices with excellent sound and usability. However, when you first connect to Xiaomi smartphones (including Redmi and POCO models), users often face difficulties: the headset is not on the list of available devices, the sound is interrupted or no communication at all, the reasons can lie in the features of the MIUI firmware, and in the settings of the headset itself.

In this article, we’ll look at all the ways you can connect, from standard Bluetooth pairing to alternative methods for older Jabra models (like Elite 65t or Move Style), and learn how to fix common bugs, why Xiaomi might not see headphones, and how to optimize sound for listening to music or calls. If you’ve tried to connect but failed, check out our problem-solving section.

1. Preparing the Jabra headset for connection

Before pairing with Xiaomi, you need to search headphones, and different Jabra models may have different processes. Here are the generic steps:

• 🔋 Headphone Charging: Make sure the headset has a charge level of at least 30%. Low charge can cause connection failures. Check the indicator: on most Jabra models, it burns red when discharged and blue/green when sufficient.
• 🔄 Reset: If the headset has already been paired with another device, reset. To do this, hold the power button (or touchpad) for 10-15 seconds until the indicator flashes red and blue at the same time.
• 🎧 Pair mode: Hold the on button (or button combination if it is Jabra Elite) to activate. 85h or Elite 10) before the audible signal or the indicator flashes in blue and white.

In models with a case (for example, Jabra Elite 75t), the headphones automatically go into pairing mode when first removed from the case. If the indicator does not flash, repeat the action or check if the case locks the button.

💡

If your Jabra headset doesn't respond to buttons, try plugging it into charging for 30 seconds, then try again. This will reset the controller's temporary errors.

2. Standard Bluetooth connection on Xiaomi

The easiest way is to use the built-in MIUI settings. The instructions are relevant for all Xiaomi, Redmi and POCO smartphones based on Android 10 and later:

1. Open Settings → Bluetooth.
2. Activate the Bluetooth slider (if it is turned off).
3. In the list of available devices, find the name of your headset (for example, Jabra Elite 4 Active). If it is not available, click Update (circle arrow icon).
4. Slip the headphones and confirm the pairing.

Once you've successfully connected, you'll see a Bluetooth icon in the status bar, and the device will show up as Connected in the settings, and if it doesn't sound, check if the headphones are selected as the output device (more on that below).

Make sure Bluetooth is on on your smartphone |

Headset is in pairing mode (flashing indicator)|

Headphones charged at least 30% |

Distance between devices not more than 1 meter (without obstacles)-->

3. Alternative ways of connecting

If the standard method doesn’t work, try these options:

Method 1: Use the Jabra Sound+ application

The official Jabra Sound+ app (available on Google Play) not only makes it easier to connect, but also allows you to customize the equalizer, update your firmware and manage noise cancellation. Download it and follow the instructions:

1. Open the app and allow access to Bluetooth and Locations (required for device search).
2. Click Add Device and select your model from the list.
3. Follow the on-screen prompts (you may need to confirm pairing on your smartphone).

Method 2: Connecting through Developer Mode

On some MIUI firmware (especially custom ones), Bluetooth is unstable. Turn on Developer Mode and change the settings:

1. Go to Settings → About Phone and tap the MIUI version 7 times until a notification appears You became a developer.
2. Back to Settings → Additionally. → For developers.
3. Find the Bluetooth Codec option and select SBC (the most compatible option).
4. Turn off Absolute Volume if the option is active.

4.Setting up the sound and microphone after connecting

After successful pairing, check the sound quality and microphone performance.

• 🔊 Low volume: B MIUI limit the maximum volume level for Bluetooth devices. To remove the restriction, install the Volume Booster app or turn off the Safe Volume level in the audio settings.
• 🎤 Bad hearing in calls: Go to Settings → Annexes → Permit management → Microphone and make sure that access is allowed for the Phone app.
• 🎶 Distortions when listening to music: In the Jabra Sound app+ Select a Music profile and turn off noise cancellation if you don’t need it.

For models with ANC (active noise cancellation), such as the Jabra Elite 85h, it is recommended to enable Through Mode in noisy places (for example, in the subway), which will improve the perception of surrounding sounds without removing the headphones.

5. Solving common problems

If the Jabra headset doesn’t connect to Xiaomi or doesn’t work properly, use this table:

If the problem persists, try resetting the network settings on your smartphone:

1. Go to Settings. → SIM-maps and mobile networks → Resetting network settings.
2. Confirm the action (this will remove stored Wi-Fi and Bluetooth devices).
3. Reboot the phone and reconnect.

💡

On Xiaomi smartphones with MIUI 13+ firmware, you may need to disable the dual Bluetooth connection feature (in Bluetooth settings) if the headset is connected with delays.

6. Connectivity Features for Older Jabra Models

Jabra devices released before 2019 (such as Jabra Move or Elite 65t) may require additional actions:

• 🔄 Manual reset: For Elite 65t Hold both touch panels for 10 seconds at the same time until the indicator goes out and flashes red.
• 📱 Using Compatibility Mode: On Xiaomi smartphones with Android 9 and below in Bluetooth settings, turn off AVRCP 1.6 (if the option is available).
• 🔌 Connection through AUX: If Bluetooth doesn’t work, Jabra Move models support wired connection via a 3.5mm connector (requires an adapter for Xiaomi without audio output).

Jabra Talk (calling headset) may need to be turned off HD-call-up SIM-maps, as they conflict with the Bluetooth codec.

💡

If your 2018 Jabra headset is older, update your firmware through the Jabra Sound+ app before connecting to Xiaomi.

7. Battery optimization and autonomy

Jabra wireless headphones can quickly run out when connected to Xiaomi due to background processes.

• 🔋 Disable unnecessary features: In the Jabra Sound app+ Deactivate Noise Reduction and Transparent Mode if not used.
• 📴 Limit background activity: In settings MIUI Go to the Battery. → Battery Optimization and Add Jabra Sound+ excepted.
• 🔄 Update your firmware: Check for headset updates regularly through the official app – newer versions often optimize power consumption.

The average time of Jabra Elite on a single charge:

💡

Use the original charging cable for the Jabra case – unoriginal cables can lead to incomplete charge and rapid discharge of headphones.

FAQ: Frequent questions about connecting Jabra to Xiaomi