Modern wearables have become an integral part of the lives of millions of users, and Xiaomi Mi Band 3 remains one of the most popular representatives of this class of devices. Despite the release of newer models, this tracker is still valued for autonomy and reliability, but many owners have difficulties with the initial activation of the device.
Often the problem is not the breakdown of the electronics, but the elementary discharge of the battery, which occurs during long-term storage in the warehouse or transportation. If you take the device out of the box and the screen does not light up, do not panic - in 90% of cases, the gadget simply requires primary recharging before activation.
In this article, we will discuss in detail all the nuances of launching a fitness tracker, consider the possible causes of system failure and provide a step-by-step algorithm for successful synchronization with a smartphone. The right sequence of actions will help to avoid errors and quickly start monitoring health.
Primary charging and activation of the device
The most common reason Mi Band 3 doesn’t turn on immediately after unpacking is because of the deep battery drain: Lithium polymer batteries used in trackers can lose charge during prolonged downtime, so the device goes into protective mode and doesn’t respond to touch.
To get started, you need to remove the capsule from the strap and put it in the charging dock. It is important to make sure that the contacts are properly positioned: the metal pads on the capsule must fit tightly to the pins of the charger. If contact is broken, the energy replenishment process will not begin.
Connect. USB-charger to any power source with a current no more 1 This could be a computer port or the original smartphone power supply, and the charge display on the tracker screen should appear a few minutes after the connection, but full activation of the system may take up to a few minutes. 10-15 minute.
💡
Before first charging, wipe the contacts on the capsule and charger with dry soft cloth to remove oxides or dust that may interfere with the passage of current.
Once the battery icon or Mi Fit logo is displayed on the display, the device can be disconnected from the network. Now the tracker is ready to pair. If the screen is still black, try gently pressing the touch button several times to wake the system.
Installation and configuration of the Mi Fit application
The tracker needs software to work properly, which mediates between the gadget and the smartphone. The main application for the Xiaomi Mi Band 3 is Mi Fit (renamed Zepp Life in some regions), which is available for Android and iOS platforms.
Download the app from the official Google Play store or App Store. Once installed, you will need to register a Xiaomi account or log in through an existing profile. Without authorization, the functionality of the device will be limited, since all health data is stored in the cloud.
The pairing process occurs exclusively through the application interface, not through the phone's Bluetooth settings. Trying to connect the bracelet through the smartphone's system menu can lead to synchronization errors and data transmission inability.
- 📱 Launch the application and go to the “Profile” tab in the lower menu.
- ⌚ Click the Add Device button and select Bracelet».
- 🔍 Wait for the Mi Band 3 name to appear on the list of available devices.
- ✅ Confirm the pairing by touching the touch button on the tracker when vibration appears.
After a successful connection, the tracker will offer to update the firmware. the firmware is critical for stable operation, so it is recommended to bring the update process to the end without interrupting the connection with the Internet.
☑️ Pre-conjugation check
Interface and navigation on the tracker menu
The Xiaomi Mi Band 3 is controlled via a touch button and swipes. The main screen displays the time, date and current step. The swipe up opens the menu with additional features, and the swipe left or right switches widgets.
A short press of the button returns to the home screen or wakes up the device. A long press (about 2-3 seconds) is usually used to confirm actions or enter the phone search mode, depending on the firmware version. Navigation is intuitive, but requires getting used to the sensor sensitivity.
Hidden gestures
The following main sections are available in the menu:
- 🏃 Training: Starting the activity monitoring mode.
- ❤️ Pulse: Measuring heart rate.
- 👟 Steps: distance travel statistics.
- ⚙️ Settings: alarm clock, step target, screen brightness.
The brightness of the screen can be adjusted manually or left in automatic mode. To save battery power, it is recommended to reduce brightness in the evening or use Do not disturb mode.
Solving problems with on and charging
If the screen does not light up for 20-30 minutes after connecting to the charger, a diagnosis is required, and often the problem lies in the oxidation of the contacts or malfunction of the charging cable itself, which comes with the kit.
Try using another one. USB-port or power supply. Sometimes the ports of the computer do not give enough current to "wake up" a deeply discharged battery.
💡
If the tracker does not respond to charging for more than an hour, the battery or power controller may have failed, requiring a replacement capsule.
There is a cold-resuscitation method: some users have noted that putting a charging tracker in the refrigerator for 10-15 minutes (in a moisture bag) helps to trigger the chemical processes in the battery.
| Symptoms. | Possible cause | Decision |
|---|---|---|
| Screen black | Deep discharge. | Leave on charging for 1-2 hours |
| Blinking battery icon | Critically low charge | Do not interrupt charging to 100% |
| Vibration without image | Failure of the | Put it on charge and reset. |
| Can't see the charge. | Dirty contacts | Drinking contacts with alcohol |
Resetting and reconnecting
In situations where the device is not working properly, freezes or does not sync with the smartphone, a complete reset may be required. Xiaomi Mi Band 3 does not have a physical Reset button, so the procedure is performed programmatically.
The easiest way is through the Mi Fit app, go to the device profile, scroll down and select Untie, and then the tracker will return to the factory settings and be ready for a new pairing.
If the program reset is not possible because of the system freeze, you can try the discharge method. Leave the tracker on until the battery is completely exhausted until it turns off. Then put it on charge - when turned on, the system often resets temporary errors.
- 🔄 Untie the device in the Mi Fit app.
- 📵 Remove the bracelet from the Bluetooth list in your phone settings.
- 🗑️ Reinstall the Mi Fit app cleanly.
- 🔗 Re-interconnect as if with a new device.
After the reconnection, all steps and sleep data stored in the cloud account will be restored automatically when an internet connection is available.