Xiaomi electric scooter 1S: How to go from scratch – from unpacking to the first trip

Electric scooter Xiaomi Electric Scooter 1S — It's one of the most popular models for urban travel, but even with a device that's so simple, the first time you start it might be a question: Did you take the scooter out of the box and it doesn't respond to the on button? Or does the motor show no signs of life after charging? This article will help you understand how to activate Xiaomi correctly. 1S, Avoid common mistakes and prepare for your first trip.

We're not going to be limited to the basic manual instructions, but you'll find practical tips for diagnosing problems, setting up through the Mi Home app, and nuances that even experienced users don't know about, such as why a scooter can't drive even when fully charged, or how to reset an engine error without contacting the service.

If you just bought Xiaomi 1S (Or you take it out after a long downtime, and this will save you time and nerves, and if you've already used the scooter, check the reset and calibration section to get back to the factory settings.

Preparation for the first launch: unpacking and inspection

Before you try to turn on the scooter, make sure it's fully assembled and ready to go. - In a box with Xiaomi 1S you will find:

• 🛴 The scooter itself (possibly in folded condition).
• 🔌 Charger (220V → 42V, steer-jack).
• 📄 Short instructions (often in several languages, but without details).
• 🔧 Key to folding the steering wheel (sometimes included, but not always).
• 🛠️ A set of bolts/nuts (if the scooter required assembly, for example, in early batches).

The first thing you need to do is visually inspect the scooter for damage.

• 🔋 Battery compartment: whether there are dents or traces of impacts (this may indicate a fall during transportation).
• 🚲 Wheels: tire pressure (on Xiaomi) 1S tubeless 8.5", normal pressure — 35-40 PSI).
• ⚡ Electronics: Wire integrity, especially for brake handle and display.

If the scooter was purchased used, be sure to check the serial number (is under the QR-using the code on the frame via the official Xiaomi website – this will help make sure that the device is not blacklisted (for example, after theft).

⚠️ Warning: If there are traces of rust or contact oxidation on the steering wheel or platform, it is a sign of wet storage.

Charging before the first switch on: why it is critical

Many users are trying to include Xiaomi 1S The battery of the scooter (lithium-ion, 7650 mAh) comes in a discharged state - this is a safety requirement during transportation:

• 🔋 Deep discharge of the battery, after which it will have to be "reanimated" through BALANCER.
• ⚡ Controller failure BMS (Battery management system, which will cause an error E02 or E03.
• 🚫 Locking the engine until fully charged (overload protection).

How to Charge Xiaomi Properly 1S first-time:

1. Connect the charger to the scooter, then to the socket (not vice versa!).
2. The indicator on the charge should light up red (charged) or green (already charged).
3. First charge time - at least 5-6 Even if the indicator turned green before.
4. After charging, turn off the power and wait 10 minutes before first turning on.

If the indicator on the charger is not burning at all, check the integrity of the cable and contacts in the scooter socket, often the problem is oxidized contacts that need to be cleaned with alcohol.

Including and basic diagnosis: what to do if the scooter does not respond

After charging, press the power button (located on the right side of the steering wheel below the display).

1. Short press - the scooter picks up and the display lights up.
2. Long press (3 seconds) - the backlight is turned on and the scooter is ready for the trip.

If the scooter is not turned on, check:

Check the battery charge (indicator on the power button)

Make sure the brake handle is not pressed (blocks the start)

Try to reset the scooter (clip the switch on for 10 seconds).

Check the fuse in the battery compartment (can burn out in KZ)-->

Common errors during the first launch:

If the scooter is turned on, but does not go when pressing the gas, check:

• 🛡️ Brake knob - even a light press blocks the engine.
• 🔌 Connection of cables under the platform (can depart during transportation).
• 📱 Settings in Mi Home – sometimes activation is required through the app.

⚠️ Attention: If the scooter suddenly shuts down while driving, it may be a sign of a malfunction of the battery or controller.Do not try to continue the trip - contact the service.

Setting up through Mi Home: why you can not do without the application

Thought Xiaomi 1S You can use it without a smartphone, the Mi Home app (or Xiaomi Scooter) gives you access to important features:

• 🔒 Activation of the scooter (sometimes required at first turn on).
• 📊 View statistics: mileage, speed, charge level.
• ⚙️ Setting up modes: eco/standard/sport, cruise control.
• 🔄 Update firmware (fixes bugs and improves stability).

How to Connect Xiaomi 1S annex:

1. Download Mi Home (App) Store/Google Play) and register.
2. Turn on Bluetooth and GPS on your smartphone.
3. In the app, click Add Device → Electric scooter → Xiaomi Mijia M365 (yes, 1S plugged in M365).
4. Hold the switch on the scooter for 5 seconds until you hear a double signal.
5. Confirm the connection in the application.

Once connected, it is recommended that:

• 🔄 Update the firmware to the latest version (corrects errors) E02 and E08).
• ⚙️ Calibrate the accelerometer (in the scooter settings in the application).
• 🔒 Install PIN-lock-in.

💡

If the app doesn't find the scooter, try restarting Bluetooth on your phone or using another smartphone. Sometimes resetting the scooter helps (clamping the power button for 10 seconds).

Calibration and resetting: when necessary

If the scooter is behaving unstablely (such as spontaneously braking or showing an incorrect speed), calibration may be required. 1S There are two types of discharge:

Soft reset (saves settings but restarts the system):

1. Turn off the scooter.


2. Press the on button and the brake button at the same time.




3 Hold for 5 seconds until you hear the beep.




4. Release the buttons and turn the scooter on again.

Hard reset (returns factory settings, erases statistics):

1. Turn off the scooter.


2. Press the switch on for 10 seconds (up to double signal).




3. Connect to the scooter via Mi Home and re-activate.

Calibration of the accelerometer (if the scooter "fleets" during acceleration):

1. Put the scooter on a flat surface.
2. Turn it on and hold it upright for 10 seconds.
3. Turn it off and turn it on again, the sensors will recalibrate automatically.

If after the reset, the scooter makes an error E02, This could mean a problem with the controller. BMS. In that case:

• Try to completely discharge and charge the battery (discharge-charge cycle).
• Check the voltage at the battery terminals with a multimeter (should be ~42V fully charged).
• If the error persists, a replacement of the controller is required (refer to the service).

First Trip: Safety Rules and Typical Beginner Mistakes

Before you go, remember the 3 key rules for Xiaomi 1S:

• 🛡️ Always check the brakes before traveling – brake sharply at low speed.
• 🚦 Do not accelerate above 20 km / h in the first 50 km (you need to "run" the engine and battery).
• 🔋 Avoid full discharge - charge the scooter with the remainder 20-30% charge.

Typical mistakes of beginners that lead to breakdowns:

• 💦 Driving in puddles – water gets into bearings and electronics, causing corrosion.
• 🏔️ Jumping off curbs - bumps damage frame and battery.
• ❄️ Use at temperatures below 0°C - Lithium-ion batteries lose capacity.
• 🔌 Charging with an unoriginal charger - can burn the controller.

How to brake correctly on Xiaomi 1S:

• 🛑 Electronic brake (button on the steering wheel) - smoothly resets speed.
• 🦵 Foot brake (on the rear wing) – use only at low speed.
• ⚠️ Do not brake with both methods at the same time – it can block the wheel.

If the scooter begins to vibrate at a speed above 15 km / h, this is a sign:

• 🚲 Wheel imbalances (you need to pump tires or balance with weights).
• 🔧 Wear of bearings (replacement required).
• 📉 Incorrect calibration (reset as described above).

💡

The first 100 km on a new scooter is a critical period, during which you should avoid extreme loads (long climbs, top speed) so as not to reduce the life of the battery and motor.

Service after the first trip: what to check

After the first departure, check the scooter for hidden problems:

• 🔧 Bolt tightening: Check steering, platform and wheel mounting (vibration can weaken joints).
• 🚲 Tire pressure: if the tires sag, pump up to 35-40 PSI.
• ⚡ Contact state: oxidation at battery terminals or charging socket.
• 🔊 Extraneous sounds: creaking, knocking or hum when moving.

What to do if the scooter does not charge after the trip:

1. Check if the indicator is on the charger.
2. Clean the contacts in the scooter nest with a cotton swab soaked in alcohol.
3. Try another charger (if possible).
4. If the indicator on the charge flashes red - the problem is in the battery (diagnosis is required).

Recommended service schedule for Xiaomi 1S:

If you plan to use a scooter in the winter, consider:

• 🔋 Battery capacity drops on 30-40% lower-temperature 0°C.
• 🚗 The rubber bluffs, which worsens the grip on the road.
• ❄️ Moisture and salt accelerate the corrosion of metal parts.

FAQ: Frequent questions about Xiaomi 1S