Activation of a new gadget is always an exciting moment, especially when it comes to a popular fitness bracelet. Many users face a situation when after unpacking the Xiaomi Mi Band 5 screen remains black and panic occurs. It is important to calm down immediately: in 99% of cases, the device is simply discharged after prolonged storage in stock.
The first thing you need to do is check the package, and you'll find the tracker, the strap and the charger in the box, and notice that the charging cable has a specific design with two contacts that should fit tightly to the back of the capsule, and if the bracelet was on the shelf for months, its battery could go into a deep discharge.
You don't have to look for a smartphone for a first run, you just plug it into a power source, and as soon as it's charged, you'll see a battery animation or a brand logo on the display, and it's a signal that the electronics are good and the device is ready for further synchronization, and if the screen is silent even after 15 minutes of charging, you should check your contacts for contamination or protective film.
The process of first switching on requires care, because it is the correctness of the actions at the start depends on the stability of the future. Fitness bracelet Xiaomi Mi Band 5 does not have a physical button on, all control is carried out through the touch panel and charging connection, this is done to improve moisture protection and reliability of the case.
To activate the device, follow the following steps:
- 🔌 Remove the tracker from the silicone strap, gently squeezing the capsule with your finger.
- 🔌 Connect the charger cable to USB-port of the computer or smartphone adapter.
- 🔌 Apply metal contacts on the back of the bracelet to the charging pins.
- 🔌 Wait for the vibration and appearance of the Mi logo on the screen.
Once the logo appears, the device will automatically go to standby mode, so you can put the capsule back in the strap, and it's important to make sure that the contacts are not oxidized and that they don't have the factory film that you sometimes find on new models, and if you see the logo, it means that the initial launch was successful.
Once the bracelet has shown signs of life, it needs to be customized, requiring a smartphone with an Android or iOS operating system. The main control tool is the Mi Fit app (or Xiaomi Wear depending on the region and firmware version), without installing this software, the functionality of the gadget will be extremely limited.
☑️ Preparation for synchronization
The process of pairing is as follows:
- Launch the application on your smartphone and log in to your account.
- Go to the profile and select “Add device”.
- In the list of available gadgets, find the Mi Smart Band 5.
- Click on the model name and confirm the pairing on the bracelet screen by touching the touch button.
You may need to update your firmware during this time, and don't ignore this requirement, as newer versions of software often contain bug fixes and improve heart rate sensors. The upgrade process can take anywhere from 5 to 15 minutes, while keeping your smartphone next to your wristband.
⚠️ Attention! If the bracelet dies or communication is interrupted during the firmware update, the device may turn into a brick.
Sometimes, users are faced with the fact that the smartphone does not see the bracelet. This is a common problem that is solved by checking Bluetooth settings. Make sure the wireless module is active and visible to other devices. It is also worth rebooting the smartphone to reset possible cache errors of Bluetooth services.
Mi Fit requires all the permissions you request, including access to geolocation, notifications and application backgrounds, and without these permissions, data synchronization will not be correct and you may not receive notifications of calls or messages.
If the bracelet is found but the connection is not happening, try "forgetting" the device in the Bluetooth settings of the phone and start searching again. Sometimes it helps to completely reset the bracelet to factory settings through the menu of the tracker itself, if it has time to turn on.
To make the tracker work properly, you need to customize your personal data, so that algorithms can correctly calculate distance traveled, calories burned, and sleep quality, and input the wrong data will distort the statistics and the information collected will be useless.
In the user profile, specify:
- 📏 Height and weight – critical for calculating steps and calories.
- 🎂 Date of birth and gender – affect the calculation of sleep phases and target pulse.
- 🏃 Activity Level – Choose Sedentary, Normal, or Active».
The Xiaomi Mi Band 5 supports many third-party dials that can be downloaded through the store in the app, not only a matter of aesthetics, but also functionality: some dials display more data on one screen.
Not all power problems are solved by simply charging, and there are a number of faults that can simulate a breakdown, even though the device is actually working, and understanding these nuances will help avoid unnecessary trips to the service center.
| Symptoms. | Possible cause | Decision |
|---|---|---|
| Black screen, no vibration. | Deep battery discharge | Leave on charging for 30-60 minutes |
| Blinking green light | Sensor or software error | Put it on charge, reset the settings. |
| The screen lights up and goes out. | Poor charging contact | Wipe your contacts, press them tighter. |
| Not turned on after falling | Damage to the plume or screen | Diagnostics are required in the service |
Special attention should be paid to contacts. They are often oxidized by sweat or moisture. Rub them with a dry soft cloth or cotton swab slightly soaked in alcohol. After cleaning, be sure to let the contacts dry completely before connecting to charging.
💡
Wipe the bracelet contacts with a dry cloth after each workout to prevent corrosion and ensure stable charging.
If none of the above methods worked, the problem may be the hardware, but it's worth trying a forced reboot or reset before you carry the device for repair, which often helps to revive a suspended power controller.
To perform reset (if the screen at least occasionally reacts):
Menu → Settings (cog icon) → System → ResetIf the menu is not available, you can try to put the bracelet on charge, wait for the vibration, and immediately quickly remove and put it back on the contacts 5-7 times in a row, this method sometimes provokes a reboot of the system.