Xiaomi’s smart fitness bracelets have long been the standard in the wearable electronics world due to their availability and functionality. However, once unpacked, many users face the first difficulties, as the tracker does not respond to pressing and looks off, a completely normal situation due to the logistics and storage of lithium polymer batteries.
The manufacturer specifically supplies gadgets in transport mode of deep sleep to save battery power during long storage and transportation. To activate the electronics of the device, it is not enough just to put it on the wrist, you need to perform a number of consecutive actions, from charging to synchronizing with the smartphone.
In this article, we will take a closer look at all the stages of initial activation, look at the features of different Mi Band models, and offer solutions for common problems when the screen remains black even after connecting to a power source. Proper start ensures a long and stable operation of your wearable assistant.
Features of activation of new models Mi Band
Modern models such as the Mi Band 6, 7 and 8 have significant differences in the initial switching procedure compared to earlier versions, the main feature being that there is no physical button on the body of the tracker itself, all navigation and control is done either through the touch screen or via a smartphone, this is done to improve moisture protection and minimize the dimensions.
Once removed from the box, the device is in a state of deep energy saving. Even if you try to tap on the screen or lift your wrist, there will be no reaction. It's not a defect, it's a protective mechanism. Activation occurs automatically when a stable voltage is applied to the contacts of the charger. It is important to use the original cable or a certified analogue, because cheap charging may not wake up the power controller.
⚠️ Do not try to disassemble the bracelet capsule or act on it mechanically in order to find a hidden button on the inclusion – in modern Xiaomi models, such a control is physically absent.
The wake-up process can take anywhere from a few seconds to a couple of minutes. If the charging indicator doesn't start immediately, don't panic. Sometimes the system takes time to check the battery status before starting the display. Leave the device on charge for 5-10 minutes, after which it should demonstrate the brand logo.
Step-by-step instruction: connection to charging
The first and most critical step is to provide power, and the bracelet is usually accompanied by a special cable, which is a special cable. USB-The new Mi Band models often use magnetic charging, which simplifies the process but requires precise positioning.
Put it in. USB-port-to-port USB (Note that the use of powerful fast-charging adapters from flagship phones can sometimes be undesirable for the low-power electronics of the bracelet, although modern controllers usually cope with this. It is best to use a port with current 1A.
☑️ Pre-insertion check
Then you have to do the right thing, and you have two golden pads on the back of the capsule, and you have to hold the cable so that the magnets will pull it in the right position, and you have to feel a little click, and you have to see the vibration or the battery icon on the screen.
If the screen catches fire and shows the percentage of charge or the Zepp logo, it means the device is on, and now it can be removed from charging for further adjustment, although it is recommended to recharge it to at least 20-30% before active use.
Connecting with a smartphone and installing an application
By itself, turning on the bracelet provides only basic functionality, like displaying time. To work properly, you need synchronization with a mobile device. The main control center for most Xiaomi models is the Zepp Life app (formerly known as Mi Fit) or the new Mi Fitness app (for Xiaomi Wear).
The adjustment process is as follows:
- 📱 Download the official app from Google Play or App Store by requesting “Zepp Life».
- 📲 Register an account or sign in through an existing Xiaomi, Google or Facebook profile.
- 🔍 Turn on Bluetooth on your smartphone and open the app.
- ➕ Click the Add Device button and select your bracelet from the list.
When you search the bracelet, you may see a request for confirmation of pairing (vibration and icon), you need to touch the screen or click on the virtual confirmation button, and after successful connection, the steps, pulse and sleep data will be transmitted to the phone.