Xiaomi CG010: Detailed instructions for use for beginners and experienced users

Xiaomi CG010 — It's a compact and functional wearable that combines the power of a fitness tracker, a smartwatch, and a health assistant, and despite its modest size, it's equipped with sensors to monitor heart rate, blood oxygen levels, sleep and activity. However, many users face difficulties when first turning on or configuring additional functions. This article will help you understand all the nuances of working with the user. CG010 — From basic connectivity to hidden capabilities.

Feature of the model CG010 It is a versatility: the device is compatible with both Android and iOS, but some features may differ depending on the smartphone’s operating system, for example, iPhone owners may have restrictions when syncing notifications or using a voice assistant. We will discuss these points in detail, as well as give recommendations for optimizing the battery, which often causes discontent among users.

If you just unpacked Xiaomi CG010 Or you've been using it for a while, but you want to reach 100 percent of its potential -- this is for you. We avoid general phrases and focus on the specific steps, mistakes and life hacks that will come in handy in everyday use.

1. First on and connecting to a smartphone

Before the first inclusion of Xiaomi CG010 Make sure the device is at least 20% charged, plug it into the charging cable (the magnetic connector comes with it) and wait for the charging indicator to appear on the screen. It takes about 1.5-2 hours to charge up to 100.

To connect to a smartphone:

• 📱 Download the official Mi Fitness app (for Android) or Zepp Life (for iOS) from the App Store or Google Play. Apps differ in interface but are functionally identical.
• 🔗 Turn on Bluetooth on your smartphone and allow the application to access geolocation (this is necessary for the pedometer to work correctly).
• ⚙️ In the app, select Add Device → Bracelet → Xiaomi CG010 And follow the instructions on the screen.
• 🔄 Wait until sync is complete (it can take up to 5 minutes on the first connection).

If the device is not detected, try:

1. Reset the bracelet (press the button for 10 seconds).
2. Turn off/enable Bluetooth on your smartphone.
3. Remove the device from the list of conjugates in the phone settings and reconnect.

⚠️ Attention: On iPhone with iOS 16+ Additional permission to access notifications in Settings may be required → Notifications → Zepp Life.Without this, the bracelet won't vibrate when incoming calls or messages are sent.

2. Core functions and management

Xiaomi CG010 It's controlled by a touch screen and a single physical button:

• 👆 Switching up/down between menus.
• 👈 Scrolling to the left – returning to the main screen.
• 🔘 button retention – on/off or menu call (depending on the current screen).

The main screen displays:

To start the training:

1. Slide down to the icon. 🏃 Training.
2. Choose the type of activity (walking, running, cycling, etc.).
3. Press Start, the bracelet will start recording data.
4. At the end, hold the button to save the results.

⚠️ Note: When using the Swimming function, make sure that the bracelet fits tightly to the wrist - the pulse sensor can malfunction when water enters the body.

3. Set up notifications and calls

One of the key functions CG010 — Call alerts and messages, to set them up:

1. Open the Mi Fitness/Zepp Life app.
2. Go to the Device Profile → Notifications.
3. Turn on the Call Notification and Notifications from the apps switch.
4. Select the apps you want to receive notifications from (for example, WhatsApp, Telegram, Gmail).

Features of the notifications:

• 📞 When an incoming call is made, the bracelet vibrates and shows the subscriber's number/name. The vibration duration is 3 seconds (unregulated).
• 📩 Messages are displayed in a stripped-down form (up to 30 characters), the full text can only be read on a smartphone.
• 🔕 In Do Not Disturb (activated in bracelet settings) all notifications are turned off except alarm clocks.

If notifications do not arrive:

• Check if notifications are allowed for the Zepp app Life/Mi Fitness in the settings of the smartphone.
• Make sure the bracelet is connected to the phone (the Bluetooth indicator should be green).
• Reboot both devices.

💡

To quickly turn off notifications on the bracelet, scroll down to the icon 🔔 And hold it for 3 seconds. This temporarily activates Do Not Disturb for 1 hour.

Health monitoring: pulse, SpO₂ sleep

Xiaomi CG010 equipped with sensors to measure heart rate (HR) and blood oxygen levels (SpO₂). The accuracy of readings depends on the correct position of the bracelet on the wrist - it should sit tightly, but not crush the skin.

How to measure the indicators:

• ❤️ Pulse: On the main screen, touch the heart icon. It takes 10-15 seconds to measure.
• 💧 SpO₂: Go to the Health Menu → Oxygen in the blood. Keep your hand still during measurement.
• 🌙 Sleep: Activates automatically. Wear the bracelet all night for accurate analysis.

The data is synchronized with the application, where you can view:

• 📊 Charts of heart rate per day / week / month.
• 🛌 Sleep phases (deep, light, REM) and recommendations for improvement.
• ⚠️ Warnings about high or low pulse (threshold values are adjusted manually).

⚠️ Attention: Sensor SpO₂ may give inaccurate readings at low ambient temperature (below) +10°C) or if the bracelet is worn over the tattoo/scar.

Critical information: If the bracelet shows SpO₂ Below 90% for 10+ See your doctor for a minute, this may indicate breathing problems.

5. Battery: how to extend the working time

Officially stated working hours CG010 — It's up to 14 days, but in practice it varies from 7 to 12 days depending on the intensity of use:

• 🔍 Continuous monitoring of heart rate (reduces autonomy by 30%).
• 📶 Frequent sync with phone (especially with weak Bluetooth signal).
• 🌙 Sleep monitoring with high frequency sensor survey.

Savings tips:

If the bracelet discharges faster than 5 days:

• Check if the training mode is turned on in the background (may occur when the software fails).
• Update the firmware through the Mi Fitness app.
• Reset the device to factory settings (hold the 15-second button).

💡

Turning off constant heart rate monitoring and manual data synchronization can increase the bracelet’s autonomy up to 18-20 days with moderate use.

6. Update firmware and reset settings

Regular firmware updates fix bugs and add new features. CG010:

1. Make sure the bracelet is at least 50% charged.
2. Connect it to your smartphone via Bluetooth.
3. Open the Mi app Fitness/Zepp Life and go to the Device Profile → Firmware update.
4. If a new version is available, click Update and wait until it is completed (don’t turn off the bracelet!).

Signs that you need to reset settings:

• 🔄 The bracelet is not synchronized with the smartphone.
• 📵 The screen doesn't respond to touch.
• ⚡ Battery discharges quickly for no apparent reason.

For discharge:

1. Disconnect the bracelet from your phone in Bluetooth settings.
2. Hold the physical button for 15 seconds until the Mi logo appears.
3. Connect the device again through the application.

⚠️ Warning: Reset removes all data from the bracelet, including training history and settings!

7. Hidden functions and life hacks

Xiaomi CG010 There are several non-obvious features that are not mentioned in the official instructions:

• 🔦 Flashlight: Quickly touch the screen twice - the backlight will turn on for 10 seconds.
• 🎵 Music control: During the playback of the track on the smartphone, you can switch the compositions swipe left / right on the bracelet.
• 🔋 Economy mode: At a charge level below 5%, the bracelet automatically turns off all functions except time.
• 📸 Camera control: In the bracelet menu there is a Camera option - when pressed, the smartphone will take a picture (you need to open the camera application first).

For customization enthusiasts:

• 🎨 Replaceable dials: More than 50 free dials are available in the Zepp Life app. To install a new one, go to Device Profile → Dials.
• 🔧 Vibration setting: Vibration intensity can be changed in Settings → Vibration (3 levels).

If you don’t have the functionality, try third-party apps like Notify & Fitness for Mi Band (Android-only) that allow you to:

• Set up individual vibrations for different contacts.
• Display the full text of notifications (up to 100 characters).
• Activate gestures (for example, shake your hand to illuminate the screen).

8. Frequent problems and their solution

Even reliable devices fail. These are the most common problems. CG010 and ways of eliminating them:

If the bracelet has stopped vibrating:

1. Check the vibration settings in the app.
2. Make sure the Do Not Disturb mode is off.
3. Test the vibration manually: Settings → Vibration. → Test.

If the bracelet is not working properly after a fall or impact (for example, the screen flashes or does not show the time), the accelerometer or the display plume is most likely damaged. In this case, contact the service center - self-repair can lead to complete failure.

FAQ: Answers to popular questions