Xiaomi Mi bracelet does not turn on after reset: how to bring back to life in 5 minutes

Resetting on the Xiaomi Mi Band fitness bracelet is a standard procedure when selling, transferring a device or fixing software failures. However, after it, many users face a problem: the bracelet ceases to respond to pressing, does not sync with the smartphone or does not turn on at all, the reasons can lie in the wrong sequence of actions, and in the technical nuances of a particular model (from Mi Band 3 to Mi Band 7).

In this article, we will analyze the step-by-step algorithm for turning on the bracelet after reset, the features of working with Mi Fit and Zepp Life applications, as well as typical errors due to which the device “hangs” on the logo or is not determined by the phone. We will focus on hardware methods (for example, forced reboot) and software tricks for models with a NFC.

If your bracelet doesn’t respond to charging, flashes red or isn’t detected in Bluetooth, don’t rush to bring it to the service. 90% of the time, the problem is solved at home in 5-10 minutes. The main thing is to follow the instructions and not miss key steps, such as updating the firmware or resetting the app cache on your smartphone.

⚠️ Note: If you reset your settings through Settings → Resetting on the bracelet itself, rather than through the application, the activation process may be different, in which case, first try forcibly restart the device (press the touch button for 15-20 seconds).

1. Preparation for inclusion: what to do before the discharge

Many users experience problems after resetting precisely because they did not prepare the bracelet and smartphone in advance.

Save your steps, sleep and workout data to the cloud (in Mi Fit or Zepp Life)

Untie the bracelet from the account in the application settings

Check the firmware version of the bracelet (relevant for Mi Band 5/6/7)

Charge the bracelet to at least 50% (otherwise it may hang on the logo)

Make sure that your smartphone is Bluetooth enabled and GPS (for some)-->

Pay special attention to the item about detaching the bracelet from the account, if you do not do this, after resetting, the device may not connect to the new phone due to linking to the old profile.

1. Open the app and go to Profile → My devices.
2. Select your bracelet and press Untie the device.
3. Confirm the action (you may need to enter a password from your Xiaomi account).

⚠️ Note: On Mi Band 4 and older, all settings, including alarms and notifications, are reset after detachment from the account.

If you reset the bracelet before selling, be sure to remove it from the list of trusted devices in your smartphone settings (Bluetooth section) this will prevent automatic connections to your phone after handing the bracelet over to a new owner.

2. Step-by-step instruction: how to turn on the bracelet after resetting

After a successful reset (via the bracelet menu or app), the device should automatically restart. If this does not happen, follow the algorithm:

1. Connect the bracelet to charge. Even if the battery was charged, after reset, additional energy may be required for the first load. Use the original cable - non-original often do not provide enough current.
2. Wait for the vibrating or flashing screen. On the Mi Band 3/4, it takes 10-15 seconds; on the Mi Band 5/6/7, it takes up to 30 seconds. If the screen doesn't respond, press the touch button for 10-15 seconds to force a reboot.
3. Install the Mi Fit or Zepp Life app. 📱 Mi Band 1-4 is only suitable for Mi Fit. 📱 For Mi Band 5-7, it is better to use Zepp Life (more stable work with the band). NFC and).

Xiaomi

.

+ → Bracelet → Choose a model

At the connection stage, the bracelet should vibrate and display the confirmation code.

• 🔄 Reset the bracelet (press the button for 20 seconds).
• 📵 Reboot your smartphone and turn Bluetooth on/off.
• 🔧 In Bluetooth smartphone settings, remove all previously saved Mi Band devices.

💡

If the Mi Band 6/7 bracelet is not detected in Zepp Life, try temporarily disabling the VPN or antivirus – they can block the connection to Xiaomi servers.

3. Common mistakes and how to avoid them

Even when following the instructions, users often make mistakes that lead to the bracelet's "bricking":

⚠️ Attention: On Mi Band models 5/6 s NFC You can't reset your bracelet menu if you have a bank card attached to it. NFC You can only use Zepp Life to reset your bank application.

4. Hardware reset: if the bracelet does not respond at all

If the bracelet does not turn on, vibrate or detect the charger after reset, try a hardware reset, which works for all models, but requires accuracy:

1. Connect the bracelet to charging (even if the cable is not detected).
2. Press the touch button for 30 to 40 seconds. On the Mi Band 3/4, hold the physical button under the screen.
3. If the screen is not responding, turn off charging and repeat step 2 without the cable.
4. After the logo is vibrating or flashing, connect the bracelet to your phone via Mi Fit/Zepp Life.

For Mi Band 5-7 models with NFC, hardware reset may require additional actions:

• 🔌 Connect the bracelet to charging and wait for the battery icon to appear.
• 🔄 Quickly press the touch button 5 times in a row (with intervals) ~1 second).
• 📱 After the reboot, connect directly through Zepp Life without waiting for full charging.

5. Activation Features for Mi Band with NFC

The Mi Band 5/6/7 NFC bracelets require additional steps when resetting due to the contactless payment module, and if you don't untie the card before resetting, you'll have to re-tie it. Here's how to do it correctly:

1. Activate the bracelet through Zepp Life (this app only supports NFC).
2. After connecting, go to Profile → Devices → Your bracelet → Contactless payments.
3. Select a bank (for example, SberBank, Tinkoff, VTB) and follow the instructions for linking the card.
4. Confirmation may be required SMS-mobile-bank.

⚠️ Attention: On Mi Band 6 NFC When you reset, the security settings of the payment module sometimes get lost. If the banking application gives an error "Device is not certified," follow the instructions:

• 🔄 Resetting the bracelet via Zepp Life (not through the device menu!).
• 📱 Reinstallation of the banking application on a smartphone.
• 🔐 Enabling Unknown Sources permission for Zepp Life in Android settings.

💡

For NFC bracelets, always use Zepp Life, not Mi Fit. The latter does not support payment feature setup and can cause synchronization errors.

6.Firmware Update After Reset: Why It Matters

Once reset, the Xiaomi Mi Band is often unstable: it loses communication with the smartphone, counts steps wrong, or discharges quickly. 80% of the time, this is solved by updating the firmware. Here's how to do it:

1. Open Mi Fit or Zepp Life and go to the section of your bracelet.
2. Click Settings → Update the firmware.
3. If the upgrade is available, plug the bracelet into charging (the battery must be charged at least 50%).
4. On the Mi Band 7, the update can take up to 10 minutes.

If the update is hanging:

• 🔌 Don't turn off the bracelet from charging.
• 📵 Reboot your smartphone and check your internet connection (update downloaded from Xiaomi servers).
• 🔄 If the process lasts more than 20 minutes, press the bracelet button for 20 seconds to restart, then try again.

💡

On Mi Band 6, after updating the firmware, the interface language may reset. To return Russian, go to Settings → Language on the bracelet itself (scroll down to the flag).

7. Alternative methods: if nothing helps

If the bracelet never turned on, try these methods (from simple to complex):

• 🔋 Battery check: Connect the bracelet to charge for 2-3 hours. If the indicator does not burn, the problem is in the cable or battery. USB-port.
• 📡 Reset Bluetooth on your smartphone: Go to Settings → Annexes → Bluetooth and clear the cache. Then restart the phone.
• 🖥️ Firmware via PC: For Mi Band 4–7 You can use the Mi Band Tool (requires root on Android or macOS/Linux). This is a risky method - if the bracelet is mistaken, it can finally fail.
• 🔧 Repair: If the bracelet does not respond to charging and reset, problems with the power controller or display plume may occur.

FAQ: Frequent questions about incorporating Xiaomi Mi after reset