Xiaomi Mi Sport: how to connect to the phone in 2 minutes (with photos and videos)

Xiaomi Mi Sport wireless headphones remain a popular choice among active users due to their combination of compactness, waterproofness and high-quality sound. However, even with such simple gadgets, beginners often have questions: how to turn on pairing mode correctly, why the phone does not see the headphones or how to reset if the connection constantly breaks. This article will help you understand all the nuances from basic instructions to solving rare problems.

Not only will we look at the standard Android and iPhone connection procedure, but we’ll also look at specific scenarios: what to do if the headphones have already been paired with another device, how to check the firmware version (this is important for stable operation!), and what Bluetooth settings optimize sound. A separate block is devoted to a hidden double-press function to control playback, which many users do not even know.

Note: The instructions are valid for all Mi Sport versions, including Basic and Pro versions. If your model has additional features (such as touch control), they will be marked separately.

1. Preparation of headphones for the first connection

Before you start pairing, make sure that the Xiaomi Mi Sport headphones are fully charged. A discharged battery is the most common reason why the device is not found on the list of available.

• 🔋 Connect your headphones to the charging cable (use the original USB-Type-C or Micro-USB depending on the model).
• 🔴 The indicator should flash red while charging and light up blue when the battery is full.
• ⏱️ Full charging takes ~1.5 It's enough for the first connection. 10-15 charge-minutes.

If the indicator does not respond to the cable connection, check:

1. Integrity of cable and connector (often contacts oxidize after moisture enters).
2. Whether you use a power adapter with a 5V/1A output or higher.
3. Cleanliness of contacts in the headphone nest (wipe with an alcohol napkin).

⚠️ Note: Do not use fast charging with higher power 5V/2A — This can shorten the life of the headphone battery. 5V/1A.

Incorporation of the interface mode

Unlike many wireless headphones, the Xiaomi Mi Sport does not go into search mode automatically after being removed from the case.

For models without touch control (Basic):

1. Hold the power button (located on the right earphone) for 5-7 seconds.
2. The indicator will start flashing red-blue color - this is a signal of readiness for pairing.

For models with touch control (Pro):

1. Touch and hold the touchpad on any of the headphones for 3 seconds.
2. Wait for the voice message “Pairing mode” (in Chinese firmware – “”) and the flashing of the indicator.

If the light flashes only blue (no red), the headphones are already paired with another device, in which case they need to be reset (instruction in section 5).

Headphones charged (indicator responds to button)|The pairing mode is activated (blinks red-blue)|Bluetooth on your phone is on|Distance between devices not more than 1 meter-->

3. Step-by-step connection to Android

On Xiaomi, Redmi or other Android devices, the procedure looks like this:

1. Open Settings → Bluetooth.
2. Activate the Bluetooth slider (if it is turned off).
3. In the list of available devices, find the Mi Sport (or Mi Basic for the base version).

Once successfully connected, the headphone indicator will light up blue (playback mode) or go out (if the sound is not transmitted). MIUI A pop-up window may appear with a proposal to install the Mi Earphones proprietary application - its installation is not mandatory, but gives access to additional settings (for example, the choice of codecs). SBC/AAC).

💡

If the headphones are connected but the sound is only in one channel, try the Bluetooth settings of the phone "forget" the device (Mi Sport) and repeat the pairing again, often solving the problem of desynchronization of the stereo pair.

4. Connection to iPhone (iOS)

On the iPhone or iPad, the algorithm is almost the same, but there are nuances with codecs and control:

1. Open Settings → Bluetooth.
2. Make sure the slider is on (should be green).
3. In the "Other Devices" section, find the Mi Sport and tap it.
4. Confirm the pairing (no input is required on iOS) PIN-code).

Important: iPhone defaults to AAC codec, which provides better sound quality than SBC (standard for Android), but some users note delays in audio when watching videos.

• 🎧 Try to disable Audiovisual Synchronization in the special features settings (Settings) → Universal access → Audiovisual content).
• 🔄 Reconnect the headphones (sometimes it helps to reset the Bluetooth cache on the iPhone).

⚠️ Note: On iOS, you can't manually select a Bluetooth codec (unlike Android with the Mi Earphones app).If the sound is interrupted, try limiting background processes by closing all apps through the App Switcher.

5. Resetting headphone settings

If the Xiaomi Mi Sport has previously been paired with another device or is not working smoothly, do a full reset:

For Basic models:

1. Turn off the headphones (hold the power button for 3 seconds until the indicator goes out).
2. Press and hold the power button for 10 seconds until the indicator starts flashing red and blue (first lights up in red, then blue).
3. Release the button - the headphones will reset and go into pairing mode.

For the Pro models:

1. Put both earphones in the case.
2. Hold the touchpad on both headphones simultaneously for 15 seconds.
3. The indicator on the case will flash yellow - this is a signal of a successful reset.

Once reset, all previous connections will be removed and the headphones will return to the factory settings.

• 🔊 The sound is quieter than usual (resetting restores factory volume).
• 🎵 One of the headphones is behind in sound (desynchronization).
• 🔋 Battery discharges quickly (may be caused by firmware errors).

6. Optimization of Bluetooth connection

Even after a successful connection, users sometimes experience cliffs or poor quality.

On Android:

• 📱 Enable Developer Mode (7 times tap the build number in Settings) → The phone).
• In the developer menu (Settings → System → For developers) set:
• 🔋 Add Bluetooth app to battery optimization exceptions (Settings) → Battery → Optimizing the battery).

On iOS:

• 🔄 Turn off Automatic Sound Switching (Settings) → Bluetooth → i (near Mi Sport) → Auto-switching).
• 📶 Turn on Plane Mode for 10 seconds, then turn off - this resets the Bluetooth cache.

For all devices:

• 📡 Reduce the number of active Bluetooth connections (e.g., turn off smartwatches or speakers).
• 🔌 Avoid using headphones near interference sources: microwaves, 2.4GHz Wi-Fi routers, wireless mice.

💡

If connection problems only occur in certain applications (like YouTube or games), try clearing the app's cache. Often, the audio delays are caused not by headphones but by software bugs.

7. Headphone control: Hidden functions

Many users use Xiaomi Mi Sport only for listening to music, unaware of the additional features:

Basic version (Basic):

• 🎵 One click on the button: playback / pause.
• 🔀 Double tap: moving to the next track.
• 📞 Triple tap: Calling the voice assistant (Google) Assistant/Siri).
• 📞 Holding 2 seconds: Accept/reject a call.

Pro version (with sensor):

• 👆 Touch and hold on any headphone: on / off.
• 👇 Double touch on the left earpiece: the previous track.
• 👉 Double touch on the right earpiece: the next track.
• 🎤 Triple touch: activation of voice assistant.

Little-known life hack: In the Pro version, you can set up a double-touch to call the last application (for example, return to Spotify after a call). To do this, install the branded Mi Earphones app and select the option “Back to App” in the control settings.

Also available in Mi Earphones:

• 🔊 Level adjustment ANC (Active noise reduction, if supported by your model).
• 🎛️ Equalizer settings (presets for rock music, classics, podcasts).
• 🔋 Displaying the charge level of each headphone separately.

8. Frequent questions and decisions