Xiaomi Redmi Wireless Headphones: How to Connect, Configure and Use

Xiaomi Redmi wireless headphones are some of the most popular smartphone accessories, thanks to a combination of affordable price, high-quality sound and usability. However, even these simple devices have nuances that are not always obvious to beginners: How to connect headphones to your phone? How to control music playback or answer calls? What to do if one earphone stops working? In this article, we will discuss all aspects of the operation of Redmi Buds, from basic settings to solving typical problems.

The Redmi Buds series includes several models (e.g. Redmi Buds 3 Lite, Redmi Buds 4, Redmi Buds 5 Pro), but most of the features and principles of their work are similar. Even if you have an older or newer version, the instructions in this article will help you to understand 90% of the tasks. For professional models (e.g. Redmi Buds 5 Pro Pro) ANC) We will also highlight the enhanced opportunities.

Before you get into the details, make sure your headphones are charged - the indicator on the case case should burn white or green (depending on the model). If the light bulb is red or flashing, plug the case into charging for 10-15 minutes, which will save most connection problems.

1. Connecting Xiaomi Redmi headphones to a smartphone

The process of pairing Redmi Buds with the phone takes no more than a minute, but there are a few things that will speed up the process.The headphones support fast connection to Xiaomi devices (thanks to Mi Fast Connect technology), but work with other brands as well (Android/iOS).

Instructions for the first connection:

• 📱 Take both headphones out of the case - they will automatically turn on and go into pairing mode (indicators on the headphones will start flashing white / blue).
• 🔍 On your smartphone, open Settings → Bluetooth and enable device search.
• 🎧 Find the name of your model (e.g. Redmi Buds 4 or Mi True Wireless Earphones) and tap on it.
• ✅ Confirm the pairing - after that, the headphones will connect automatically with each extraction from the case.

If the headphones are not determined, try resetting the settings:

1. Put both headphones in the case and close the lid.
2. Press and hold the button on the back of the case (usually hidden under a rubber plug) for 10-15 seconds until the indicator flashes red and white.
3. Repeat the connection process again.

⚠️ Note: Some models (e.g. Redmi Buds 3 Pro) do the reset differently, by pressing the touchpad three times quickly in the case.

2. Managing playback and calls

All Redmi Buds have touch panels that respond to touch, and gesture functions vary by firmware and model, but most support the standard set:

On models with active noise cancellation (ANC), Redmi Buds 5 Pro, additional gestures added:

• 🔇 Switching on/off ANC: Keeping your finger on the touchpad for 2 seconds.
• 🎵 Transparency Mode Switching: Triple Touch (on some firmware).
• 📞 Activation of voice assistant: triple retention (works with Google Assistant or XiaoAI).

Make sure the headphones are connected to the phone.|Check the battery charge (indicator on the case)|Check out the gestures for your model|Update the headphone firmware (if available)-->

If the gestures don't work, try:

1. Wipe the touch panels with a dry wipe (mud or moisture may block touch).
2. Reset the headphone settings (see section 1).
3. Update the firmware through the Mi Earphones app (available for Android).

3. Sound and uniformity adjustment (EQ)

By default, Redmi Buds offer a balanced sound profile, but you can change it to your preferences.

Method 1: Using the Mi Earphones (Android) app

The official Xiaomi app allows you to fine-tune the sound, check the charge level and update the firmware. Download it from Google Play and follow the instructions:

1. Put the headphones on the phone.
2. Open the app and select your model in the list.
3. Go to the Sound section. → Equalizer and select one of the preset profiles (Basic Boost, Pure Vocals, Classics, etc.).
4. If necessary, customize the custom EQ hand-shifting.

Method 2: Through the smartphone settings (Android/iOS)

If the Mi Earphones app is not available (for example, on iPhone), use the built-in tools:

• 📱 On Android: Open Settings → Sound. → Sound effects and select an equalizer.
• 🍎 On iPhone: Go to Settings → Music. → Equalizer and select the appropriate profile.

💡

If bass sounds too loud, try to reduce the frequencies in the 60-250 Hz range in manual mode. EQ. This will reduce the load on the speakers and improve the detailing.

On hardware models. ANC (For example, Redmi Buds 5 Pro can also adjust the intensity of noise cancellation:

1. Open the Mi Earphones app.
2. Move to the ANC → Level adjustment.
3. Choose one of the modes: Weak, Medium or Strong.

4.Battery charge check and operating time

Battery life of Redmi Buds depends on the model and usage conditions, and the table below shows the averages for popular versions:

To check the level of charge:

• 🔋 On Android: Open the notification panel – there will display the percentage of charge of headphones and case (if supported).
• 📱 On iPhone: Add Battery widget to the home screen or open Settings → Bluetooth – next to the headphones will be an indicator.
• 🎧 Through the Mi Earphones app: Status section shows the exact percentage for each headphone and case.

💡

Charging through a wireless case only happens when the headphones are in it and the lid is closed. If the indicator on the case is not on, check the cable or port. USB-C.

Tips for extending battery life:

• 🔌 Do not leave your headphones on charge for more than 24 hours – this reduces battery life.
• 🌡️ Avoid overheating (do not charge in direct sunlight or near heat sources).
• 🔄 Once every 2-3 months, completely discharge and charge the headphones (battery calibration).

5. Solving common problems

Even reliable devices sometimes fail, and here are the most common Redmi Buds issues and ways to fix them:

5.1 One earphone is not working or is connected separately

If the left or right earphone does not make sound or is defined as a separate device:

1. Put both headphones in the case and close the lid for 10 seconds.
2. Take them out and wait for automatic connection (the indicators should flash synchronously).
3. If it doesn’t help, reset the settings (see section 1) and reconnect.

5.2 Headphones discharge quickly

Causes and solutions:

• 🔊 Too high volume: lower the sound level to 70-80%.
• 📶 Continuous Bluetooth Connection: Turn off your headphones when not in use.
• 🔄 Older firmware: update via Mi Earphones.
• 🌡️ Overheating: Let the headphones cool before charging.

Poor sound or interruption quality

Most often associated with Bluetooth interference:

• 📱 Reconnect the headphones to the phone.
• 📶 Make sure there are no obstacles between the phone and the headphones (walls, metal objects).
• 🔄 Reboot your smartphone.
• 🎵 Check the bitrate in Bluetooth settings (select) SBC or AAC AptX if there are compatibility issues).

⚠️ Warning: If after falling or getting moisture headphones stopped working, do not try to disassemble them yourself - this will lead to loss of warranty.

6. Additional functions and hidden capabilities

Many users are unaware that Redmi Buds support a number of useful features that are not always described in the instructions:

• 🎤 Game Sound Mode (low latency): activated in the Mi Earphones app (Settings section) reduces lag to 80-100ms, which is important for mobile gaming.
• 🔊 Automatically shutting down the sound when you shoot: if you remove one earphone from the ear, playback will stop (does not work on all models).
• 📱 Quick switching between devices: Press and hold the touchpad on one of the headphones for 3 seconds to reconnect to the last gadget used.
• 🔋 Powerbank charging: case supports charging from external batteries (current up to 1A).

For models with ANC (Redmi Buds 5 Pro is available for advanced settings:

• 🎧 Adaptive ANC: Automatically adjusts noise reduction depending on the environment.
• 🗣️ Transparency mode: skips external sounds (useful for conversations without removing headphones).
• 🎵 Customize sound effects: in the application you can select a profile for music, movies or podcasts.

💡

If you lose a case often, attach a keychain with AirTag or similar tracker to it.Redmi Buds cases don't have built-in GPS, But the metal loop on the body makes it easy to fix the third-party beacon.

7. Update to the headphone firmware

Regular firmware updates fix bugs, improve sound and add new features, and check for updates through the Mi Earphones app:

1. Put the headphones on the phone.
2. Open the application and go to the Firmware Update section.
3. If a new version is available, click Update and wait for the process to be completed (the headphones should lie in a case with the lid open).

Important points:

• 🔋 Make sure the case is charged at least 30 times%.
• 📶 Don’t interrupt the update process – it can put the headphones out of order.
• ⏳ It takes 3-5 minutes to update, and when it's done, the headphones automatically reboot.

⚠️ Warning: If the headphones stop working after the upgrade, reset (section 1) and repeat the procedure. If the problem persists, the firmware rollback is only possible at the service center.

8. Model comparison: Which Redmi Buds to choose?

The Redmi Buds series includes models for different tasks - from budget options for calls to premium headphones with a range of different types of devices. ANC. In the table below, we compare key characteristics:

Selection recommendations:

• 💰 Budget up to 2,000 ₽: Redmi Buds 3 Lite – optimal for calling and listening to music without claims to Hi-Fi.
• 🎮 Redmi Buds 4 – Low latency and good autonomy.
• 🎧 For music and noisy places: Redmi Buds 5 Pro – the best sound and the best sound ANC line-up.

FAQ: Frequent questions about Xiaomi Redmi Buds