The Xiaomi Mi Band 6 fitness bracelet remains one of the most popular activity-tracking gadgets, despite the release of new models. Its simplicity, long autonomy and rich functionality attract users, but even with such a device, questions can arise — especially for beginners. Most of the difficulties begin with the very first step: how to properly turn on the bracelet after buying or long downtime?
In this article, we’ll look at all possible scenarios, from standard on-boarding to solving problems when the Mi Band 6 doesn’t respond to taps, how to charge your device before you first start, which buttons are responsible for what, and what to do if the bracelet doesn’t turn on after you update your firmware, and a detailed guide to linking to your smartphone and setting up your basic functions.
If you've just unpacked the box or pulled out the bracelet after storage, don't panic about not responding to touch, it's probably a battery that's dead or a wrong sequence of actions, and then you have a step-by-step algorithm that takes into account all the nuances.
Preparation for the first inclusion: charging and checking the completeness
Before you try to turn on the Xiaomi Band 6, make sure the device is charged. The bracelet comes with a minimum battery charge (up to 20%), which is only enough for a few hours of operation. If you bought the gadget a long time ago or it was in stock, the battery could completely run out.
Use the original cable from the kit to charge. USB-port of the computer, charger (5V/1A) Important: Do not use fast charging with higher current 1A — This could shorten the life of the bracelet battery. 100% near 1.5–2 The completion of the process is signaled by a green indicator on the charger.
- 🔋 Charge level when buying: usually 10-20%. check the indicator on the screen after connecting to charging.
- 🕒 Full charge time: 1.5-2 hours. Do not interrupt the process if the indicator flashes red.
- ⚡ Power source: Anybody is suitable USB-port 5V (computer, smartphone adapter).
- ❌ What to avoid: Do not use damaged cables or higher voltage charges 5V.
While the bracelet is charging, check the equipment.
- 📦 The fitness bracelet Xiaomi Mi Band 6 with a strap.
- 🔌 Charging cable (magnetic connector).
- 📄 Short instructions in several languages (including Russian).
⚠️ Attention: If the charging indicator does not burn after connecting the cable, check the cleanliness of the contacts on the bracelet and charger. Sometimes it is enough to wipe them with a dry wipe or soft brush. Do not use alcohol or liquids - this can damage the rubber gaskets.
Standard inclusion of Xiaomi Band 6: step-by-step instructions
When the bracelet is charged (the indicator shows at least 30%), you can start to turn on. There is no physical power button in the Mi Band 6 - control is carried out through the touch screen and gestures.
- Check the charge. Connect the bracelet to charge for 5-10 minutes if the screen is not responding. Even the discharged device should show a charging indicator.
- Touch the screen. You can easily tap the display, and the Mi logo or the main menu should appear.
- Wait 10-15 seconds. If the screen is not responding, try holding your finger on the display for 3-5 seconds.
- Swipe up. Once the logo appears, swipe your finger across the screen from the bottom up to unlock the bracelet.
If the bracelet is turned on, you'll see the main menu with icons of steps, pulse, battery and other data. If the screen remains black, go to the section "What to do if Mi Band 6 does not turn on."
Charge the bracelet to at least 30% | Check the purity of the contacts |Tap the screen for activation |Twipe up to unlock |Make sure there is no physical damage-->
Once successfully activated, the bracelet will automatically go into standby mode, and to activate the screen again, you just need to raise your hand (Raise to wake up) or touch the display, which is set up later in the Mi Fitness mobile app.
Link to a smartphone and setup via Mi Fitness
Without syncing with a smartphone, the Xiaomi Band 6 works like a regular watch with a pedometer. To unlock all the functions (notifications, sleep monitoring, training), you need to connect the bracelet to the Mi Fitness app (formerly Mi Fit).
- 📱 Google Play for Android
- 🍎 App Store for iOS
Instructions for binding:
- Sign up or sign in to your Xiaomi account (via Google/Facebook).
- Click "Add device" (the "+" icon in the upper right corner).
- Select "Breasurement» → Mi Smart Band 6 from the list.
After synchronization, update the bracelet firmware (if an update is available) to fix any bugs and add new features. Do not interrupt the update process - disabling the bracelet at this point can cause the system to crash.
| Function | How to set up in Mi Fitness | Recommendations |
|---|---|---|
| Notifications | Profile → Notifications → Select applications | Turn off unnecessary notifications (such as games) to save charge. |
| Sleep monitoring | Profile → Sleep monitoring → Include | Activate Do Not Disturb during sleep for accurate data. |
| Raise to wake up | Profile → Display → Raise to wake up | Conveniently, but slightly increases battery consumption. |
| Automatic Tracking of Training | Profile → Training → Autodetermination | It doesn’t work perfectly – it’s better to start your workouts manually. |
⚠️ Warning: If you sync up with a “Disconnected” error, restart the bracelet (hold the touch button for 10 seconds) and try again. Also check that the phone is enabled with Bluetooth and permissions for the Mi Fitness application.
💡
If the bracelet doesn’t find a phone to sync, try turning off Bluetooth on your smartphone, then turn on and start searching for devices in Mi Fitness.
How to Reboot Xiaomi Band 6 (soft reset and hard reset)
Sometimes the bracelet can freeze: not respond to touch, show synchronization errors or misrepresent the time, and in such cases, rebooting helps. There are two ways:
1. Software reset (soft reset)
Suitable for light freezes when the screen responds to pressing:
- Open the bracelet menu with swipe up.
- Go to Settings. → Reboot (icon) ⚙️).
- Confirm swipe to the right.
2. Forced reset (hard reset)
If the bracelet is completely silent and does not respond to touch:
- Connect the bracelet to the charger.
- Hold the touch button (the area under the screen) for 15-20 seconds until the Mi logo appears.
- Release the button and wait for the reboot (can take up to 1 minute).
After hard reset, all settings will be reset to factory settings, but training and sleep data will be stored in the Mi Fitness app if synchronization was previously available.
What to do if the bracelet is stuck on the Mi logo?
What to do if Xiaomi Band 6 is not included
If the bracelet doesn't respond to charging and pressing, the causes can range from a battery drain to a hardware failure.
- Check the charging: 🔌 Connect the bracelet to another USB-port or charger. 🔍 Check the contacts on the bracelet and cable – they should be clean and not bent. ⏳ Wait 30 minutes – sometimes the charging indicator does not light up immediately.
- Try a forced reset: 🔄 Hold the touch button for 20 seconds (even if the screen is unresponsive). 🔋 Connect to charging and repeat reset.
- Check for physical damage: 💧 Traces of moisture inside the housing (condensation, corrosion). 🔨 Cracks on the screen or at the place of attachment of the strap.
If the bracelet still doesn't turn on, but you're sure it's charged, there may have been a firmware failure, and in this case, the update via Mi Fitness will help:
- Connect the bracelet to the charger.
- Open Mi Fitness and go to the device profile.
- Click on “Firmware Update” and follow the instructions.
⚠️ Warning: If the bracelet doesn't turn on after falling or getting water, don't try to disassemble it yourself - it will deprive you of warranty.In the Mi Band 6 model, the level of protection is not enough. IP68, but it does not guarantee operation after immersion in water or heavy mechanical impact.
Customize screen and gestures for easy control
After switching on and synchronizing, you should configure the display of information on the screen. In Xiaomi Band 6, more than 30 dials are available (including animated ones), as well as configuring the displayed widgets.
How to change the dial:
- Open your Mi Fitness and select your bracelet.
- Go to Profile. → Dials.
- Select your favorite option and click “Install”.
- Synchronize the changes with the bracelet (can take up to 1 minute).
Customization of widgets (screen swipes):
- 📊 Main screen: steps, pulse, battery.
- 🏃 Swipe left: training data.
- 🌙 Swipe right: sleep monitoring.
- ⚙️ Swipe up: settings menu.
Also in the bracelet settings (Profile → Display) you can activate:
- 🔦 Automatic lighting when lifting your hand.
- 🕒 Time display always (reduces autonomy).
- 📱 Locking the screen during training.
💡
For maximum autonomy, turn off constant time display and automatic backlighting, which will increase the life of the bracelet from 14 to 20+ days.