Amazfit smartwatches and fitness bracelets have long been popular accessories among Xiaomi smartphone owners — and it’s no surprise that both brands belong to the same Xiaomi Group ecosystem, which guarantees excellent compatibility. However, even with such “kin” integration, users often face problems when connecting first: the device is not located, the Zepp app (formerly Mi Fit) gives errors, and notifications come with a delay or do not come at all.
In this article, we will analyze all ways to connect Amazfit to Xiaomi, Redmi and other phones. POCO — From basic Bluetooth synchronization to fine-tuning notifications and solving common errors. GTR 4, GTS 4, Bip 5 T-Rex 2, and the nuances of working with MIUI 14/15. If your bracelet refuses to connect or constantly breaks the connection, here you will find proven solutions.
1 Preparation before connecting: What to do on a Xiaomi phone
Before you start syncing, make sure your Xiaomi smartphone is ready to work with Amazfit, and skipping these steps often leads to failures like “device fails” or “connection error.”
First, update the firmware. MIUI Outdated builds (especially those based on Android 10 and below) may not support new Amazfit models. → The phone. → System Update. If you have an update, install it and restart the device.
Second, enable Bluetooth and geolocation. Although Amazfit is Bluetooth-enabled, many models (e.g., the same as the one on the other, GTR (4) require access to a location for the pedometer to operate correctly, and GPS. Go to Settings. → Connections and sharing → Bluetooth and activate the module. Geolocate in Settings → Security and confidentiality → Location.
Finally, allow the Zepp app to auto-run (or Mi Fit if you use it). MIUI, And the notifications will stop coming. → Annexes → Application management → Zepp → Auto-start.
- 📱 MIUI 14/15: Check the version in Settings → The phone, if it's lower. 14.0.5 — refresh.
- 🔄 Reboot: After a system update or Zepp installation, restart your phone.
- 🛡️ Antivirus: temporarily disable Xiaomi Security – it can block the connection.
- 📶 Internet: Network access (Wi-Fi or mobile data) is required for the first synchronization).
⚠️ Note: If you are using Xiaomi EU ROM (custom firmware, some Amazfit features may not work properly. In this case, try resetting the bracelet to factory settings (Device Settings) → Reset in the Zepp app).
2. Install and configure the Zepp app (formerly Mi Fit)
The official Amazfit management app is Zepp (formerly Mi Fit), which can be downloaded from Google Play or AppGallery, but for Xiaomi owners, there is a nuance: in some regions (for example, in Russia), the app may not be available in the Play Market.
- Download. APK-file from the official Zepp website (Support section) → Download).
- Allow installation from unknown sources: Settings → Annexes → Special permits → Installation of unknown applications → select the browser.
- Install the application and open it.
After the first launch, Zepp will request permission.
- 📱 Contacts (for call notifications).
- 📁 Files and media (to download dials).
- 📍 Location (for the purpose of GPS-tracking).
- 🔔 Notifications (for synchronization of alerts).
If you skip these steps, some of Amazfit’s features will not be available, for example, without permission to notify you, you will not be able to receive messages from messengers to the bracelet.
Download the Zepp app|Enable Bluetooth and geolocation|Allow auto-run Zepp in MIUI|Provide all requested permits|Restart the phone after installation-->
⚠️ Note: On Xiaomi phones with MIUI 13 and below, you may experience a “Can’t connect to the server” error when registering with Zepp. VPN (For example, Cloudflare WARP) or sign up through the Zepp website and then log in to the app.
3. Step-by-step instructions: how to connect Amazfit to Xiaomi
Now, let's get to the synchronization process itself. This is a good guide for all Amazfit models (from Bip S to Bip S). GTR 4) cellphones Xiaomi/Redmi/POCO on MIUI 12–15.
Step 1: Launch Zepp and create an account (or sign in if you already have one) and use the same email as for Mi Account, making it easier to sync your data with Xiaomi Health.
Step 2. Click Add Device** from the app's main menu. Select your Amazfit model from the list. If it's not available, select "Other Device" and enter the name manually.
Step 3: Turn on the bracelet or watch (if it is switched off)
- On the Amazfit Bip 5/GTS 4: press the side button on 3 seconds.
- On Amazfit. GTR 4/T-Rex 2: Press and hold the top button.
Step 4: The phone will be asked to connect via Bluetooth, confirm it, if the request does not appear:
- Go to Settings → Bluetooth on your phone.
- Find the Amazfit device in the list and click “Hide”.
- Go back to Zepp and try again.
Step 5. Wait until sync is complete. It can take up to 5 minutes -- don't close the app or turn off Bluetooth. Once you're connected successfully, you'll see the main screen with your device data.
💡
If Amazfit is not on the device list, try resetting it: press both buttons for 10 seconds (for models with two buttons) or use the combination in the bracelet menu (Settings for bracelets). → Reset).
| Model of the Amazfit | Including | Reset button |
|---|---|---|
| Bip 5, Bip U Pro | Press the side button for 3 seconds. | Hold the button for 15 seconds. |
| GTS 4, GTS 3 | Touch screen or side button | Settings → System → Reset |
| GTR 4, GTR 3 Pro | Upper button (3 seconds) | Upper + Lower buttons (10 sec.) |
| T-Rex 2 | Any button (3 seconds) | All 4 buttons at the same time (8 seconds) |
4. Notification setting and data synchronization
Once Amazfit is successfully connected to Xiaomi, you need to configure notifications to receive alerts for calls, messages and calendar events. → Notifications in the Zepp app.
How to enable notifications:
- Open Zepp and select your device.
- Go to Notifications. → Management of notifications.
- Activate the “Call Notifications” and “Notifications from Applications” switches.
- In the list of applications, mark those alerts from which you want to see on the bracelet (for example, WhatsApp, Telegram, Gmail).
On Xiaomi phones, you additionally need to allow Zepp to access notifications in the system settings:
- Go to Settings. → Annexes → Application management → Zepp.
- Select Notifications and enable the permission to “Show Notifications”.
- Return to Permits and make sure that Auto Start and Background Work are enabled.
If the notifications still don't come:
- 🔄 Reboot your phone and bracelet.
- 📵 Turn off Do Not Disturb mode on Amazfit (Settings) → Don't disturb).
- 🔗 Check if Xiaomi Security is blocking Zepp’s background activity.
Why are there no notifications from Viber/Telegram?
5. Solving typical problems when connecting Amazfit to Xiaomi
Even with the right setup, Xiaomi users may encounter errors. Consider the most common and ways to fix them.
🔴 Problem: "It's not possible to find the device»
Causes and solutions:
- 📵 Bluetooth is disabled: check if it is enabled in the notification curtain and in the settings.
- 🔄 Bluetooth Cache: Clear the module cache in Settings → Annexes → All applications → Bluetooth → Warehouse → Clear the cache.
- 📱 Outdated firmware: Update MIUI Zepp appendix.
- 🔋 Low Bracelet Charge: Charge the Amazfit to 50% and try again.
🔴 Problem: “connection error” or permanent communication breaks
This error is most often caused by background optimization. MIUI. Decisions:
- 🛡️ Turn off battery optimization for Zepp: Settings → Battery. → Optimizing the battery → All applications → Zepp → Not optimize.
- 🔄 Reconnect the device: Remove Amazfit from the list of Bluetooth devices on your phone and add again.
- 📵 Check if other connected gadgets (earphones, speakers) interfere.
🔴 Problem: Zepp doesn't open or crash
Failures in the application are usually associated with:
- 📥 Damaged cache: Clear Zepp data in Settings → Annexes → Zepp → Warehouse → Clear the cache/data.
- 🔄 Incompatible version: uninstall the application and install the latest version from the official website.
- 🛡️ Blocking. MIUI: Add Zepp to Xiaomi Security Exceptions.
The device is not in place.|The connection is always broken.|No notifications coming.|Zepp is flying out/not opening|It's working fine.-->
⚠️ Warning: If Amazfit doesn’t connect after all the manipulations, try resetting the network settings on your phone: → SIM-maps and mobile networks → Resetting Wi-Fi, mobile network and Bluetooth settings will delete all stored networks and associated devices, but often solves Bluetooth problems.
6. synchronize with Xiaomi Health and other services
One of the advantages of Xiaomi’s ecosystem is the ability to synchronize data between Zepp and Xiaomi Health (formerly Mi Fit), which allows you to collect all health data in one place and use it in other applications (such as Google Fit or Strava).
How to connect Zepp with Xiaomi Health
- Open Zepp and go to Profile → Settings → Accounts and synchronization.
- Select Xiaomi Health and click “Connect”.
- Enter your Mi Account (should match your Zepp account).
- Allow access to health data.
Once synchronized, data from Amazfit (steps, pulse, sleep) will be automatically transmitted to Xiaomi Health to check for:
- Open Xiaomi Health.
- Go to the Devices section, where your Amazfit should be displayed.
- Check the activity charts – they should match the data in Zepp.
If the synchronization is not working:
- 🔄 Reboot both apps (Zepp and Xiaomi Health).
- 📵 Make sure your phone is connected to the Internet (synchronization is done via the cloud).
- 🔧 Disable and reconnect your Mi Account in Zepp settings.
💡
Synchronization with Xiaomi Health allows you to use Amazfit data in other services (for example, Google Fit or Apple Health through third-party applications like SyncSolver).
7. Optimizing the work of Amazfit with Xiaomi: tips for advanced users
To make sure that Amazfit is stable and uses less power on your phone, follow these guidelines:
1. Set up background activity:
- 📱 B Settings → Battery. → Battery Optimization Add Zepp to Exceptions.
- 🔄 B Settings → Annexes → Zepp → Select the battery "Without restrictions».
2. Update the bracelet firmware:
- Open Zepp, select your device and check for updates in Device Settings → Update of the PO.
- 🔋 Make sure the Amazfit charge is above 50% before upgrading.
3. Reduce the synchronization frequency:
- By default, Amazfit syncs every 30 minutes.To save your phone power, increase the interval to 1 hour in Device Settings → Synchronization of data.
4. Use alternative dials:
- Download additional dials to the Device Profile → Dials for Amazfit. GTR 4 and GTS 4 Animated options available with weather and notifications.
5. Set up your gestures:
- In Device settings → Gestures can be enabled by raising your hand to activate the screen or shaking to search for your phone.
💡
If your Amazfit discharges quickly, turn off the constant pulse in the device settings. Measuring every 10 minutes (instead of 1 minute) will significantly extend the running time.