The compatibility of Xiaomi’s ecosystem and Amazfit wearables is usually easy, but the initial setup process requires a clear sequence of actions. The Amazfit Bip smartwatch is a popular choice for Redmi smartphone owners due to its long battery life and informative display. It is critical to use the right software for successful synchronization, since the standard Bluetooth menu of the smartphone is not designed for full control of the gadget.
The main tool for interaction is the specialized application Zepp (formerly known as Mi Fit), which takes over the management of notifications, collection of biometric data and setting of dials. The MIUI operating system installed on Redmi phones, there are aggressive energy saving algorithms that can interrupt the background operation of the application. That is why simple installation of the program is often insufficient, you need to perform a number of additional system settings to keep the clocks online.
In this article, we will take a look at the journey from unpacking your device to fully integrating with your smartphone. The key is to install Zepp before turning on Bluetooth on your watch, which is often overlooked by users. We will also look at the typical pairing errors that arise from the nature of the Bluetooth protocol in the MIUI shell, and suggest effective ways to solve them.
Preparation of the device and smartphone for pairing
Before starting the synchronization process, make sure both devices are ready to go. Charge the Amazfit Bip to a level of at least 50-60%, as the initial setup and firmware update process can require significant energy consumption. If the watch is new, remove the protective film from the charging contact on the rear panel to ensure a reliable connection to the magnetic charger.
On a Xiaomi Redmi smartphone, you need to activate the wireless module. Go to Settings → Bluetooth and turn on the switch. Don't try to find the watch in the list of available devices and create a pair through this menu - this is a common mistake that leads to conflicts when you further configure through the application.
💡
Before you start setting up, restart your smartphone – this will clear the cache of Bluetooth services and prevent possible device detection errors.
Make sure the phone is geolocated. Wearable apps require access to GPS to properly search for the gadget during the initial scan. In modern versions of Android without the location enabled, the app simply won't see your watch, even if it's in pairing mode.
Installation and configuration of the Zepp application
To manage the watch, you will need the official Zepp app. It can be downloaded from the Google Play store or the App Store. Xiaomi smartphone owners also have an installation option through the built-in GetApps store, but the version from Google Play is usually updated faster and runs more stable.
Once installed, launch the app and create a Zepp Account or log in through an existing Xiaomi, Google or Facebook profile. Registration is mandatory to keep your activity history and settings in the cloud. Read and accept the user agreement carefully, and provide all the permissions requested.
When you set up your profile, you can specify your real-life height, weight, date of birth, and gender, which are the parameters that Amazfit's algorithms need to correctly calculate steps, calorie expenditure, and sleep phase analysis, and inaccurate data will lead to errors in health statistics.
The process of pairing a clock with a phone
When the app is ready, go to Profile → Add Device → Watch. In the list, find the Amazfit Bip model. The app will start scanning the surrounding space. At which point a pairing confirmation request or vibration signal may appear on the watch screen - confirm the action if required.
Once you find the device, you'll see a confirmation code on your smartphone screen. Compare the numbers on your phone display and the clock. If they match, press the confirmation button. It can take 10 to 30 seconds to establish a secure connection.
- 📱 Make sure your smartphone screen is unlocked while searching for the device.
- ⌚ Keep your watch close to your phone, but don’t press it close to metal surfaces.
- 🔋 Check that the watch does not run Do Not Disturb or Sleep mode, which may limit visibility.
If the pairing is successful, the app will suggest updating the watch firmware. Firmware is the software that controls the gadget. Updating is critical to correcting errors and improving connection stability.
Critical MIUI settings for stable operation
Xiaomi Redmi owners are more likely to have to shut down background apps than others. MIUI and HyperOS aggressively shut down processes to save battery life. To keep the Amazfit Bip connected to the phone, you need to exclude the Zepp app from optimization.
Find the Zepp app icon on your desktop, click on it and hold your finger until the menu appears. Select About. Go to Saving Charge (or Battery) and select No Limits. This will allow the app to run in the background without restrictions.
💡
Without setting “No restrictions”, notifications from messengers may come with a delay or not come at all due to the closure of the process by the system.
You also need to allow auto-start. In the same About menu, find Auto-Start and activate it, which ensures that the sync service will start immediately after the phone is turned on, without waiting for manual opening.
| Setup parameter | Where to find out. | Recommended value |
|---|---|---|
| Saving charge | About the application → Battery | No restrictions. |
| Auto-start | About the annex → Permits | Included. |
| Display over windows | About the annex → Other permits | Permitted. |
| Access to location | About the annex → Permits | Allowed always |
Setup of notifications and access rights
To make the clock vibrate when incoming calls and messages, you need to give the app the appropriate rights. Go to Profile → Notifications in the Zepp app. Here you will see a list of all the programs installed on the phone.
Activate switches in front of the apps you want to see on your wrist, which are usually Telegram, WhatsApp, Viber and system calls, and note that for this feature to work, the Zepp app must have access to read notifications.
⚠️ Note: If you have enabled notifications for the app but they don't come, check if the phone itself is in "Do Not Disturb" or "Silent Mode." Also make sure that the Bluetooth settings in the "Access to Contacts" section are ticked.
Don’t forget that long text can be cropped on the small Amazfit Bip screen. For comfortable reading, adjust the font size in the app or select a dial displaying several lines of text.
Solving Connection Problems
Sometimes the adjustment process is not smooth, the clock may not be in, reset the connection or transmit pulse data, and the first step in diagnosis is always to completely clean the list of conjugated devices.
Go to your phone's Bluetooth settings, search the Amazfit Bip list, and click "Forget Device" or "Unpair." After that, delete the watch from the Zepp app (Profile → Add Device → Select Watch → Delete). Reboot your smartphone and repeat the procedure again.
☑️ Diagnostics of connection
If the problem persists, check the Android version and system updates. Sometimes security protocol versions conflict. Also, cleaning the cache of the Zepp app itself through the About app menu → Memory → Clear helps.