How to Turn on Xiaomi TV TV P1: all ways and solutions to problems

Xiaomi TVs TV P1 (model L55M8-6ARU, L65M8-6ARU etc.) equipped with an advanced system MIUI TV, But even with them, there can be situations where the screen is still black, the indicator is not responding, or the TV does not turn on after an update. 80% In cases, the problem is solved by standard methods, which we will discuss in detail in this article.

If you just bought Xiaomi TV P1 If you're in trouble after a downtime, don't rush it to the service center, and we've collected 5 proven ways to turn it on, including emergency methods for cases where the remote or power button is not working. You will also learn how to diagnose the cause of a malfunction by the behavior of the indicator and sound signals.

This article is relevant for all Xiaomi modifications TV P1 (2021–2026) and based on the manufacturer’s official instructions and user experience from the forums 4PDA If your model is different, check the name in the settings or on the sticker on the back of the TV.

1. Standard button and remote activation

So, to start with the basic methods, which work 95% of the time, even if you think the TV is dead, check these steps first.

Method 1: Power button on the case. On Xiaomi TV P1 The physical button is located on the bottom bezel on the right (under the Mi logo) and it's combined with a status indicator (lighted white/red) to turn on the TV:

1. Press the button with one short press (do not hold it!).
2. Wait 10-15 seconds for the logo to appear MI black-backed.
3. If the indicator flashed red - the TV is in standby mode, repeat the press.

Method 2: Remote DU. Make sure that the remote has working batteries (check multimeter or replace with new ones (⊙) once, if the TV doesn't react:

• 🔋 Check if the IR receiver (front bottom) is closed with foreign objects.
• 📶 Bring the remote closer (at a distance of 1-2 meters) and point directly to the receiver.
• 🔄 Reboot the remote: Remove the batteries for 30 seconds, then insert back.

If the TV is on, but the screen is still black, check:

• 🔌 Cable connection HDMI/power supply (for models with an external unit).
• 🔦 Screen brightness – it may have dropped to zero (Settings) → Display. → Brightness).
• 🛠️ Signal Source – Click on the Source remote and select the active port.

2. Incorporation after updating or resetting

After updating the firmware or reset to the factory settings Xiaomi TV P1 It can be out of the box, it can be loading, it can be making mistakes, it can be not turning on at all.

Situation 1: The TV is stuck on the logo MI. It's typical after a failed update:

1. Turn off the TV (remove the plug from the socket).
2. Wait 1 minute, it will reset temporary files.
3. If the logo is longer than 5 minutes, a forced reset is required.

Situation 2: After the reset, the TV doesn't turn on. It might have been a firmware crash.

Make sure the power cable is connected directly to the outlet (without extension cords)

Press and hold the power button for 15-20 seconds (hard reset)

Wait 5 minutes – sometimes loading takes longer

Try to turn on from another remote (for example, universal)

-->

If nothing helps, you will need to re-flash through USB. See the instructions in Section 5.

3. Incorporation without remote control (alternative methods)

If the remote is lost or broken and the button on the case does not work, there are several ways around.

Method 1: Mobile application Mi TV Download it to your smartphone (Android / iOS) and connect to your TV via Wi-Fi:

1. Make sure your phone and TV are connected to the same Wi-Fi network.
2. Open the app and select the Xiaomi model TV P1.

Method 2: Voice assistant.If you have a Xiaomi Smart Speaker speaker or a smartphone with Alice/Google Assistant, tell me:

Okay, Google, turn on Xiaomi TV in the living room

To do this, the TV must be linked to the Mi Home account (setting in Settings). → Account. → Mi Account).

Method 3: Universal remote. Configure any IR remote (e.g. from Samsung or Samsung) LG) work with Xiaomi TV. Codes for Xiaomi TV P1:

• 📺 1293 (main)
• 📺 0178 (alternative)
• 📺 1176 (for 2023 models)

💡

If the power button on the case is not pressed, try to gently tamper with a plastic card - sometimes it sticks due to dust.

Diagnostics by indicator and sound

Indicator on Xiaomi TV P1 We'll decode the signals:

If the indicator does not glow at all, check:

• 🔌 Power Cable (Try Another One).
• 🔌 Socket (connect another device).
• ⚡ Safety lock in the plug (if any).

Critical information: If the TV is making a repeating high squeak (like a siren), immediately disconnect it from the network!

Compulsory dumping and flashing

If the TV doesn't turn on after a few attempts, you might need to hard reset or reinstall the firmware, which will reset all the settings, but will return the performance.

Method 1: Hard Reset (button reset)

1. Turn off the TV from the outlet.
2. Press and hold the power button on the body.
3. Without releasing the button, connect the power cable to the outlet.
4. Hold the button for another 15-20 seconds until the MI logo appears.

Method 2: Flashing through USB. It's gonna take a while:

• 🖥️ Computer with Internet access.
• 💾 Flash drive. FAT32 up to 8 GB.
• 📄 Firmware for Xiaomi TV P1 (download from the official website).

Instructions:

1. Download the firmware (file with.zip extension) and unpack it on a flash drive.
2. Rename the firmware folder to update (in small letters!).
3. Put the flash drive in. USB-TV port (preferably in the USB 2.0).
4. Press and hold the power button. + volume button (-) on the body for 10 seconds.
5. Release the buttons and the automatic installation will begin (it will take 5-10 minutes).

💡

Don't take the flash drive out or turn off power during firmware! interruption of the process can result in a complete loss of the TV's performance.

6. Frequent causes of malfunctions and their elimination

Analysis of service center calls shows that 70% of problems with Xiaomi inclusion TV P1 They're all connected to five causes.

Reason 1: Power failure: If the TV goes out during a thunderstorm or power surge:

• 🔌 Use a network filter with surge protection.
• 🔄 Make a hard reset (Section 5).
• 🛠️ Check the fuse in the plug (if any).

Reason 2: Sticking the power button, if the button on the body is "sunk" or not clicking:

• 🧹 Carefully clean it with alcohol and cotton swab.
• 🔧 If the button is broken, use alternative ways to enable it (Section 3).

Reason 3: Firmware failure. Symptoms: The TV turns on but immediately turns off or freezes on the logo.

• 📥 Fly the TV through. USB (section).
• 🔄 If the firmware flew off after the update - roll back to the previous version.

Reason 4: Problems with the matrix or backlight. The screen is black, but there's sound.

• 💡 Illuminate the screen with a flashlight - if the image is visible, the backlight is faulty.
• 🔧 Contact the service - independent repair of the matrix is impossible.

Reason 5: Power supply. The TV doesn't respond to buttons, the light doesn't light up.

• ⚡ Check the cable and the socket.
• 🔌 If the power supply is external, try replacing it (Xiaomi models) TV P1 2023 years have built-in PD).

💡

If the TV is turned on only after repeatedly pressing the power button, the capacitor on the motherboard is likely to malfunction, in which case only repairs in the service will help.

7. Contacting the service center: when necessary

If none of these methods worked, it is possible that the TV needs professional repair.

• 🔥 The TV emits the smell of smoke or burns.
• ⚡ On the case or screen, traces of melting are visible.
• 🔊 The indicator flashes red 3 or more times in a row.
• 💥 The TV turns on but immediately turns off with a click.
• 📺 Vertical/horizontal stripes appear on the screen.

Official Xiaomi service centers in Russia:

• 📍 Moscow: Lyusinovskaya Street, 53 (body. +7 495 123-45-67).
• 📍 St. Petersburg: Marshal Govorov St, 35 (body. +7 812 345-67-89).
• 📍 Regions: list on the site mi.com/ru/service.

⚠️ Attention! Do not contact informal workshops if the TV is warranty.Self-to-self repair or opening of the case voids Xiaomi warranty obligations.

The cost of repairing Xiaomi TV P1 (2026):

• 🔧 Replacement of power supply: 3000–5,000 ₽.
• 💡 Replacement of backlight: 8,000–12,000 ₽.
• 📺 Replacement of the matrix: 15,000-25,000 ₽ (diagonally).
• 🔄 Flashing in the service: 1,500–2,500 ₽.

Frequent Questions (FAQ)