Xiaomi TVs are some of the most popular on the market due to the combination of modern technology and affordable prices, but even with such devices, sometimes there are difficulties: the TV does not respond to the remote, does not turn on after an update, or suddenly turns off while watching. In this article, we will discuss all possible ways to turn on Mi TVs. TV, Redmi Smart TV We will also tell you what to do if the standard methods do not work.
It's important to understand that the process of enabling it can vary depending on the model and the firmware version. TV 5 Pro touch button on the case, and the Redmi Smart TV X50 — We've taken these into account, and we've developed generic instructions that will work for most of the brand's devices, so if your TV is still warranty, avoid disassembling the body -- try software methods first.
This article will be useful for both beginners and experienced users.
- 🔘 Standard ways of inclusion (remote, button, voice assistant)
- 🔌 Starting methods without responding to commands
- ⚡ Solutions for TVs that are stuck on the logo or in update mode
- 🛠️ Diagnosis of hardware malfunctions (power supply, motherboard)
If you're Xiaomi. TV It does not turn on after a voltage surge or fall, first check for external signs of damage (melted wires, cracks on the body). In such cases, self-repair can aggravate the problem - it is better to contact the service center.
1. Standard onset with the remote control
The most obvious way is to use the original remote control (DU), but even here there are nuances that many people miss: for example, the remote must be paired with the TV (especially after resetting), if the indicator on the remote does not burn when you press buttons, the problem may be a discharged battery or a malfunction of the device itself.
To turn on the Xiaomi TV remote:
- Make sure that the remote has working batteries (alkaline batteries, such as Duracell or Energizer, are recommended).
- Point the remote to the TV’s IR receiver (usually located at the bottom of the screen in the center or right).
- Press the Power button (🔄) If the TV doesn't respond, try holding it for 3 to 5 seconds.
- When you first turn on after buying or resetting, you may need to set up your language and network – follow the on-screen hints.
If the remote is not working, but the batteries are working:
- 🔦 Check the IR port of the TV for dirt or mechanical damage (wipe with an alcohol napkin).
- 📱 Try using the Mi Remote app (available for Android and iOS).
- 🔄 Reboot the remote: Remove the batteries for 30 seconds, then insert back.
Important: Some Xiaomi models TV (Like Mi. TV 6 OLED) They support Bluetooth connectivity, in which case the remote must be pre-coupled to the TV via the settings menu.
☑️ Checking the remote control before switching on
2. Activation of the button on the TV body
All Xiaomi TVs have a physical or touch button on the case, and its location depends on the model:
- 📺 Mi TV 4/4S/4X: The button is located on the bottom of the screen on the right side (touch or mechanical).
- 📺 Mi TV 5/5 Pro/6: The button is hidden under the Mi logo in the center of the lower frame (click on the logo).
- 📺 Redmi Smart TV: mechanical button on the back panel on the right (near the ports) HDMI).
Instructions for inclusion:
- Find the button (if it is touch-sensitive, touch it once; if it is mechanical, press before clicking).
- Hold the button for 5-10 seconds if the TV doesn’t respond to a short press.
- If the indicator on the front panel lit up red, then changed color to blue – the TV will turn on in 10-20 seconds.
Critical information: on some models (e.g. Mi) TV Q1) Long-term retention of the on button (more than 15 seconds) leads to a forced reboot, rather than turning on!
| Model TV set | Type of button | Location. | Features |
|---|---|---|---|
| Mi TV 4A 32" | Mechanical | Back panel, right | Pressing with force is required |
| Mi TV 5 Pro 55" | Sensory | Under the Mi logo | Reacts to a light touch |
| Redmi Smart TV X50 | Mechanical | Back panel, next to HDMI 1 | Could be covered by a stub. |
| Mi TV 6 OLED | Sensory | Lower frame, center | Supports double-touch for quick access to the menu |
If the button does not respond:
- 🔌 Check if the TV is connected to the outlet (the power indicator should burn red when turned off).
- 🔄 Try another socket or network filter.
- 🛠️ Check the button for mechanical damage (for example, after a TV crash).
💡
If the button on the case is fused or not pressed, do not try to repair it yourself - this can damage the plume.
3. Network Incorporation (Wake-on-LAN)
Xiaomi TVs based on Android TV They support Wake-on-LAN (WoL) technology, which allows you to turn on your device over a local area network, which is useful if the remote is lost and the button on the case is not working:
- 📱 A smartphone or computer on the same network as a TV.
- 📌 MAC-TV address (can be found on the back sticker or in router settings).
- 🛠️ Magic Packet application (for example, Wake On Lan for Android or Depicus for Windows).
Step-by-step:
- Make sure your TV is connected to the network via Ethernet or Wi-Fi (in sleep mode Xiaomi) TV maintains the network connection).
- Download and install the app for WoL.
- Enter. MAC-TV address (example: 00:11:22:33:44:55) and send Magic Packet.
- The TV should turn on within 5-10 seconds.
If the Wake-on-LAN is not working:
- ⚙️ Check if the feature is enabled in the TV settings: go to Settings → Network and Internet → Additionally. → Wake-on-LAN.
- 🔌 Make sure the router does not block broadcast packets (disable). AP Isolation if it is enabled).
- 🔄 Reboot your router and TV (unplug for 30 seconds).
Restriction: Wake-on-LAN only works if the TV is switched off correctly (not switched off from the power outlet) and after complete de-energization, the function may not work.
How to find out MAC-TV address?
4. Enable via Mi Home or Google Home app
If you're Xiaomi. TV It's connected to the Mi Home or Google Assistant ecosystem, and it can be enabled remotely via a smartphone, and it works even if the remote is lost, but it requires some pre-configuration.
For the Mi Home app:
- Open the app and select your TV from the device list.
- Click on the Power icon (🔄) bottom-screen.
- If the TV is not responding, check the network connection (the TV and phone must be on the same Wi-Fi network).
For Google Assistant:
- Say the voice command, OK Google, turn on Mi. TV In the living room" (the name of the room must match the settings in Google Home).
- If the command fails, check that the TV is added to the Google Home app and the Remote Control option is enabled.
Frequent problems and solutions:
- 🔌 The TV does not appear in Mi Home: reconnect it to your Xiaomi account via settings (Account) → Mi Account).
- 📶 Google Assistant commands don’t work: Update your TV firmware and restart the Google Home app.
- 🔒 Offline Device: Check if the router firewall blocks the connection to Xiaomi servers.
Important: for remote control to work, the TV must be connected to the Internet, and if the Wi-Fi is turned off, this method will not work.
💡
Mi Home and Google Home only allow the TV to turn on when it is off (not disconnected from the outlet) and will require a physical push of a button after it is completely de-energized.
5. Incorporation after freezing or updating
If the Xiaomi TV is stuck on the Mi logo, black screen or in the process of upgrading, standard on-boarding methods may not work, in which case forced reboot or resetting will help.
Method 1: Hard reboot
- Turn off the TV for 30 to 60 seconds.
- Press and hold the switch on the case for 15-20 seconds (even if the TV is off).
- Connect the power back and try turning on the TV with a button or remote.
Method 2: Reset to factory settings (if the TV is turned on but not loaded)
- On the remote, press and hold Home. + Back up (↩️) simultaneously 10-15 seconds.
- In the Recovery Menu, select Wipe Data/Factory Reset (use volume buttons for navigation, Power to confirm).
- After resetting, the TV will reboot and prompt you to set it up as new.
Method 3: Restore the firmware through USB (if the TV is not loaded)
- 📁 Download the official firmware for your model from Xiaomi support site.
- 💾 Unpack the archive and copy the file update.zip flash-drive (FAT32, volume 32 GB).
- 🔌 Put the flash drive in. USB-port of the TV, then press and hold the Menu + Power on the remote for 10 seconds.
⚠️ Warning: interrupting the firmware update process may cause the TV to blink (total inoperability) and do not turn it off when installing updates!
If the TV is not turned on after reset:
- 🔌 Check the power supply for the presence of bloated capacitors (characteristic sign - the TV turns on, but immediately turns off).
- 🛠️ Check the plumes connecting the motherboard to the screen (may be damaged during transportation).
- 📞 Contact the service center if you suspect a hardware malfunction.
How to distinguish between a freeze from a hardware breakdown?
6. Diagnostics of hardware malfunctions
If none of the software methods worked, the problem may lie in the hardware, and let's look at the typical malfunctions and their signs:
| Symptoms. | Probable cause | Decision |
|---|---|---|
| The indicator is not on, the TV does not respond to the buttons. | Power supply failure | Check the fuse, capacitors, replace the unit |
| The TV is turned on, but immediately turned off. | Overheating or short circuit | Clean the dust, check the fans |
| Image is there, but no sound. | Problem with audio amplifier or speakers | Check the speaker plumes, the sound settings |
| Screen flashes or artifacts appear | Failure of the matrix or video processor | Diagnostics at the service center |
Self-diagnosis:
- Check the power supply: turn off the TV, remove the back cover and inspect the power supply for bloated capacitors or blackened elements. If you have a soldering iron and experience, you can replace the capacitors yourself (use similar capacity and voltage).
- Motherboard test: If the power supply is working but the TV is not turning on, the motherboard may be the problem, and check if the voltage is applied to it (multimeter required).
- Diagnostics of the matrix: connect the TV to another signal source (for example, HDMI-If the image is missing, the problem is in the matrix or plumes.
⚠️ Attention: disassembling the Xiaomi TV deprives you of warranty! If the device is warranty service, do not open the case - contact an authorized service center.
Typical causes of hardware breakdowns:
- ⚡ Power surges in the network (solution: use a network filter or UPS).
- 💦 Moisture ingestion (even condensation can cause corrosion of contacts).
- 🚀 Mechanical damage (shocks, falls).
- 🔥 Overheating (dust-clogged ventilation holes).
If you're not sure about your repair skills, you'd better trust the diagnostics to the professionals. The cost of repairing a power supply or motherboard in a service is usually 30-50% of the price of a new TV, which is cheaper than buying a new device.
Frequent questions and decisions
We have collected answers to the most common questions of Xiaomi users TV, TV-related.
The TV doesn't respond to the remote, but the button on the body works.
After the upgrade, the TV doesn't turn on. How do you get it back on?
The TV turns on, but it turns off.
Can I turn on Xiaomi? TV sans remote and button on the body?
How to turn on the TV after a power surge?
If your question isn’t covered in this section, check out Xiaomi’s official support or contact the user community where you can find solutions for rare cases.
Remember: Most of the problems with incorporating Xiaomi TV Hardware malfunctions are less common, but require professional intervention. Don't risk your device if you're not sure what you're doing!