Modern Xiaomi Mi TV 4S offers users a wide range of entertainment options, but initial peripheral settings are often difficult. Smart device owners face the need to synchronize the remote control to access the Android TV interface and all multimedia features. The connection process can vary depending on the type of connection, whether it is an infrared port or a more advanced Bluetooth module.
Understanding how your controller works avoids many errors in the initial activation. Some remote models require close contact with the receiver, others are able to work through obstacles at a distance. It is important to consider that wireless communication can be sensitive to interference, so the right sequence of actions is critical for successful pairing.
In this article, we will take a look at all the steps of connection, from simple installation of batteries to complex manipulation of the system menu. You will learn how to force to start a search device if the automatic mode did not work, and what hidden features are available after successful configuration. Proper execution of instructions will ensure the stable operation of your Xiaomi Mi TV 4S for many years to come.
Definition of the type of remote and preparation of equipment
The first step to successful synchronization is to accurately determine the type of remote control you have. Xiaomi Mi TV 4S devices can come with classic IR remotes or modern Bluetooth versions with voice control. Visually, the Bluetooth remote is often distinguished by the presence of a microphone and additional buttons for streaming services, as well as the absence of the need to point it strictly to the TV logo.
Regardless of the model, preparation begins with checking the power sources. Make sure that the bay has fresh batteries of the correct size, usually AAA. Contact oxidation or weak charge can prevent signal transmission, even if the device is working. Wipe the contacts with clean dry cloth if you notice signs of oxidation or dust.
- 🔋 Check the polarity of the battery installation according to the scheme inside the compartment.
- 👁️ Inspect the front of the remote for contaminants blocking the IR signal.
- 📡 Make sure that between the remote and the receiver TV Box no direct barriers.
- 📱 Keep your smartphones with an active IR port away to eliminate interference.
⚠️ Warning: Do not use old and new batteries at the same time. Different levels of charge can lead to leakage of the electrolyte and damage to the electronics of the remote control.
Standard Bluetooth pairing procedure
For owners of models with wireless technology, the main method of connection is to use a combination of buttons. Approach the Xiaomi Mi TV 4S at a distance of no more than 20 centimeters, which is necessary to ensure that the weak start signal was accurately read by the receiver of the device.
Press and hold two buttons at the same time: Home and Back, which can be used instead of the back button, Mi or OK, hold them for 5-10 seconds until the LED light on the top of the remote blinks quickly, signaling a switch to detection mode.
A pop-up window should appear on the TV screen to report a new device found. Select the "Plug" or "Put" option using any working input method, such as the connected device. USB-If the remote is not already responsive, the system will automatically install the necessary drivers and profiles.
☑️ Checking Bluetooth connection
If the automatic window doesn't show up, go to the settings manually. Find Settings → Remotes and Accessories → Add Accessory. Run the search and repeat the procedure with the buttons pressed. Once the process is completed successfully, the remote will be fully functional, including voice input.
Infrared connection and universal mode
Unlike Bluetooth, infrared (IR) does not require a pairing procedure in the classical sense.The signal is transmitted directly from the remote emitter to the receiver on the Xiaomi Mi TV 4S body. However, if you use a universal remote or application on a smartphone, you may need to customize the code.
For standard IR remotes, it's easy to just insert the batteries and point the device at the bottom of the TV frame where the sensor is located. Make sure that nothing blocks direct visibility. Unlike Bluetooth, you don't have to hold buttons here, the signal goes instantly when you press it.
Sometimes you have a situation where the remote is partially working, you have the power on and the navigation is not. This may indicate a failure in the receiver's firmware. Try to remove the batteries from the remote for 30 seconds, then insert back and quickly press a few random buttons to reset the residual charge.
| Parameter | Bluetooth remote | IR remote (Infrared) |
|---|---|---|
| Range of action | Up to 10 meters. | Up to 5-7 meters. |
| The need for direct visibility | Not required | I'll be sure. |
| Energy consumption | High-pitched | Low. |
| Support for voice input | There is. | No. |
| Difficulty of connection | Requires pairing | Plug and Play |
Why can't IR remotes see TV?
Using a Smartphone as a Remote Control
If the desktop is lost or damaged, a smartphone is a great solution. For Xiaomi Mi TV 4S TVs running on Android TV, there is an official Google TV app (formerly Android TV Remote Control), which allows you to fully control the interface, enter text from the phone keyboard and even broadcast the screen.
To get started, make sure your smartphone and TV are connected to the same Wi-Fi network. Download the app from Google Play or the App Store. Launch the program and it will automatically start searching for available devices on the local network. Select your Xiaomi Mi TV 4S from the list.
The screen will show a confirmation code, enter the displayed numbers in the field on the screen of the smartphone, then the phone will turn into a full touchpad and remote, which is especially convenient for entering search queries on YouTube or Netflix, since the virtual keyboard greatly speeds up the process.
💡
If the app can't see the TV, check if the router has activated the AP Isolation function, which prevents devices on the same network from seeing each other, which blocks the remote.
Configuring voice control and special buttons
One of the key features of the advanced remotes for Xiaomi Mi TV 4S is voice search support. To activate this feature, you need to give the application the necessary permissions after connecting. Press the microphone button and follow the instructions on the screen.
The system can suggest setting up Google Assistant, which allows you to control your smart home, learn the weather, run apps, and search for information in voice, and the quality of recognition depends on the clarity of your speech and the absence of background noise.
You should also pay attention to programmable buttons, if you have them on your remote. Often manufacturers leave two color buttons for quick access to streaming services. Their purpose can be changed from the Settings menu → Remote and Accessories → Special buttons.
⚠️ Attention: Voice search may not work if your Google account settings restrict microphone access rights or your activity history is disabled.
Solving common problems and resetting settings
Even if you follow the instructions correctly, you may experience failures. If the Xiaomi Mi TV 4S remote has stopped responding or is running late, try a full connection reset. To do this, go to Settings → Remotes and Accessories, find your remote in the list and select "Disable" or "Forget device."
After you shut down, you can rewire the pairing procedure again, and if that doesn't work, you might need to reboot the TV itself, pull the power cord out of the socket, wait 1-2 minutes, and turn the device on again, which will clear the temporary cache of the system.
In rare cases, the problem lies in the hardware of the receiver, and if the IR remote doesn't work at all and Bluetooth doesn't see the devices, the Wi-Fi/Bluetooth module inside the TV may be faulty, because they are often combined into a single board, which would require a call to the service center.
💡
Rebooting the TV by completely disconnecting from the network solves 90% of the programming errors of pairing the periphery.