Owners of Xiaomi Mi TV 4S 43 often wonder how to get the best picture that meets modern standards. HDR activation (High Dynamic Range) and 4K resolution are key parameters that make the image bright, contrast and detail. However, automatic settings do not always correctly recognize the capabilities of connected devices, requiring manual user intervention.
Before you get to the specific actions in the menu, you need to make sure that your technical base is ready to play high-quality content. Xiaomi Mi TV 4S 43 is equipped with a matrix with a resolution of 3840×2160 pixels and supports an extended dynamic range, but it requires compliance with several conditions.
In this article, we will take a look at the algorithm that will allow you to get the most out of your device. We will look at the intricacies of how HDMI ports work, screen refresh rates, and how to check the actual status of HDR in a running application. Careful follow-up will help avoid common errors when the image remains dim or blurred due to the wrong interface mode.
Compatibility check and equipment preparation
The first step to getting the picture perfect is to audit the hardware used. The Xiaomi Mi TV 4S 43 supports the HDR10 standard, but to activate it, the signal must come in the appropriate format. If you use embedded applications or connect an external console, make sure that the content source also supports 4K and HDR. Without this, the data chain will be limited to the weakest link, the weakest link.
Particular attention should be paid to the cable. HDMI. For transmission 4K 60 Hz signal and support HDR Standard cable is required HDMI 2.0 or higher (High Speed) Older 1.4 cables are physically unable to pass this amount of data, and the TV will automatically switch to mode. SDR (Standard Dynamic Range or lower resolution to Full HD.
Check which port you connect the device to. The back of the Xiaomi Mi TV 4S 43 usually has multiple connectors, but not all of them can be equivalent depending on the revision of the board.It is recommended to use ports labeled as HDMI 2.0 or simply connect the main console / console to the first port, which often takes priority when automatically determining.
⚠️ Note: Use of cheap cable HDMI length of more than 2 meters without shielding can lead to unstable operation HDR, manifested in screen flickering or periodic signal loss.
If you connect a computer, game console or media player, make sure that their system menu already has a resolution of 3840×2160 and a color depth of 8-bit or 10-bit. The TV will not be able to “pull” HDR on a signal that comes in low quality.
Setting up image parameters in Android TV system
After the hardware is ready, you need to go to the software part of the setup. Android TV interface on board Xiaomi Mi TV 4S 43 offers flexible tools for calibration. Go to the main menu and select Settings. Here you are interested in the item responsible for screen and sound parameters.
Depending on the firmware version, the path may vary slightly, but the logic remains the same. You need to find the Image Settings section or Picture Settings. This is where the key switches that control the matrix modes are hidden. By default, the TV can be in Standard or Bright mode, which does not always activate the full range of HDR technologies.
Find the HDR setting. In some versions of the PatchWall shell, it can be hidden in the "Advanced" or "Expert Settings" submenu. If you see the "Automatically" option, leave it on. This allows the TV to switch between SDR and HDR itself depending on the content of the frame. However, if the automation is not working correctly, you can try forced activation if the firmware model allows it.
💡
For the best color rendering in HDR mode, choose the preset Mode of the Movie or Movie image, as they usually have the most accurate default color calibration.
An important parameter is Local Dimming, if available in your version of the software. This function controls the backlight of the matrix, increasing contrast in dark scenes. For HDR content, this parameter is better set to High or Auto to emphasize the advantages of the technology.
Activation of the extended HDMI format
A critically important step that is often overlooked is the setup of the HDMI ports themselves. By default, Xiaomi TVs can use HDMI 1.4 compatibility mode for maximum compatibility with older devices. To unlock the potential of 4K HDR, you need to switch ports to HDMI 2.0 mode.
To do this, go to the TV settings menu. The path usually looks like: Settings → General → HDMI input (or Settings → General → HDMI 2.0 Format). Here you will see a list of ports. You need to choose the one that your signal source is connected to and change the mode from "1.4" to "2.0".
After switching, the TV may ask for a reboot or a brief blink of the screen, which is a normal system response to a change in the data protocol, and the port is now ready to transmit the high bitrate signal required for HDR10 and high frame rates.
☑️ Checking the settings HDMI
If the image is missing after the switch or the message "No signal" appears, check the cable. Chances are your current cable does not meet the requirements of standard 2.0 and cannot transmit increased data flow, in which case you will need to replace the cable with a certified High Speed.
Adjustment of frequency of update and permission
The quality of the picture depends on the frequency of the screen refresh. For Xiaomi Mi TV 4S 43, the optimal mode is 60 Hz at 4K resolution. Some users mistakenly believe that 30 Hz is enough for movies, but for dynamic scenes and the 60 Hz system interface, they provide smoothness and no jerks.
You can check the current settings in the information menu. On the remote control, click the button that calls the menu of sources or screen settings (often a three-point button or a special "Mi" button). In the corner of the screen, a plaque with the current resolution and frequency should appear. If it is specified 30 Hz, you need to change the source settings.
In the settings of the TV itself, you rarely have to force the frequency to externally log in because it is dictated by the source. However, in embedded applications (for example, YouTube or Netflix), the quality can be adjusted manually. Go to the application settings, select "Video Quality" and make sure that 4K or Ultra HD is selected.
| Parameter | SDR mode (Normal) | HDR mode (Targeted) | Impact on the picture |
|---|---|---|---|
| Permission | 1920×1080 | 3840×2160 | Clear details, lack of pixelation |
| Frequency | 30 Hz/50 Hz | 60 Hz | Smoothness of movement, lack of jerks |
| Depth of color | 8 bits | 10 bits | Smoothness of gradients, lack of posterization |
| Brightness | 100 nits (conditionally) | Up to 1,000+ nits | Realism of light and glare |
Note that when you switch to 4K 60Hz, the load on the TV's processor increases. If you use old or heavy applications from untested sources, they can run slower. That's a fee for high interface detail.
Real-time HDR activation check
How do you make sure that all settings are correctly applied and the TV is really in HDR mode? Android TV system on Xiaomi Mi TV 4S 43 has a built-in indicator. When you run content that supports extended dynamic range, in the upper (or lower) corner of the screen for a few seconds should appear the logo HDR or HDR10.
If the logo doesn't show up, but you're confident in the settings, try running a reference video. On YouTube, find a channel called "4K HDR Demo" or similar. Launch a video marked HDR. At that point, click the settings button on the remote or call the video information menu. If the TV correctly recognizes the signal, the video information will indicate "HDR" or "HLG".
You can also use AIDA64 or similar system monitors available on Google Play on your TV, which show specifications of the current video stream in real time, including color bits and HDR format.
Why can't the HDR logo appear?
Visual evaluation is also important: HDR looks more contrasting, colors become more saturated, but not acidic, but natural, black becomes deeper, and white objects (such as snow or clouds) do not lose detail in the light.
Addressing common problems and conflicts
Even with the right settings, users can run into problems. One of the most common is that the image looks faded and gray. This happens when the TV receives an HDR signal but displays it in SDR mode without the right tone mapping, in which case you have to force the image to change to "HDR" or "Bright" at the time of viewing.
Another problem is the desynchronization of sound and video or twitching, which may indicate a lack of cable bandwidth or overheating. HDMI-Try replacing the cable with a shorter, better cable, and make sure the audio settings are formatted. PCM or Passthrough, corresponding to your acoustic system.
⚠️ Attention: If, after activation, HDR The image has become too dark, do not rush to increase the overall brightness, it is better to adjust the setting "Local contrast gain" or "Dynamic contrast" so as not to lose detail in light areas.
In some cases, resetting the image settings to factory values helps. Go to Settings → Image → Reset. Then recalibrate the calibration procedure. This eliminates software errors accumulated during operation.
💡
HDMI cable quality is the most frequent bottleneck when setting up 4K HDR. Don’t skimp on wires if you want to get the manufacturer’s declared picture quality.