Apple smartphone owners often wonder if accessories from other manufacturers are compatible with their ecosystem. Xiaomi’s headphones are no exception, and the Mi AirDots Pro 2 (also known as Xiaomi Air 2) works perfectly in tandem with iOS. However, the primary synchronization process has its own nuances, different from connecting to Android devices where an animation pop-up is available.
Despite the lack of a proprietary iPhone app, the basic functionality of the device is maintained in full: you can enjoy high-quality sound, use active noise cancellation and control playback through touch zones. Understanding the intricacies of the Bluetooth protocol in an Apple environment will avoid common errors at the first launch.
In this guide, we will take a detailed look at every step needed to successfully pair gadgets. We will also address the issues of customizing gestures and solving typical problems with connection stability. Qualcomm’s technology, which underlies these headphones, provides low latency, which is critical for watching videos and games.
Preparation of headphones and smartphone for pairing
Before starting the procedure, make sure your iPhone has a wireless module on. Charge the case and the headphones themselves by at least 20-30%, as a discharged battery can lead to unstable operation of the Bluetooth adapter while searching for devices.
On your iPhone, go to Settings → Bluetooth. Make sure the slider is activated and the phone starts scanning the available devices around. At this point, don't remove the headphones from the case unless they've been paired with any device before, as they should be in standby mode.
⚠️ Note: If the headphones were previously used with an Android smartphone, they can automatically try to connect to it.In this case, you need to temporarily turn off Bluetooth on the old device or remove the headphones from its list of saved devices.
Prolonged touch-sensitive tapping may be required to force the pairing mode if the automatic search fails to produce results. Usually, the indicator on the case flashes white to signal readiness for mating. TWS-model.
The process of activating the pairing mode
The key is to enter visibility mode correctly. Unlike many of its peers, the Xiaomi AirDots Pro 2 doesn't have a physical button on the case body. To activate the search mode, you need to put both earbuds in the case, open the lid and touch the touch areas on both headphones simultaneously.
Hold your fingers on the sensors for about 5 seconds until the indicator on the front of the case flashes white quickly, which means the device is broadcasting a detection signal. Now on your iPhone screen, the name "Mi True Wireless EBs Basic R" or "Air2 Pro" should appear on the list of available devices.
☑️ Checklist of successful pairing
Once you select a device in the list, you may see a request on your phone's screen to confirm pairing. Press "Connect." The process of installing drivers and profiles takes only a few seconds. Once you successfully connect, the indicator on the case will go out or light up straight, and the iPhone status bar will display an icon for the headphone battery.
Customization of controls and gestures in iOS
Since the Mi Earbuds app is not available for iOS, the change in control settings is made exclusively through double or triple touch of the sensors. By default, the gesture configuration is already optimized for basic use, but it is important for users to know the standard combinations.
Double-touching on the right or left earphone is usually responsible for Play/Pause or answering an incoming call. Triple-touching often activates Siri, which is extremely convenient for iPhone owners. Four-tap can switch noise reduction modes if this feature is supported by a specific firmware revision.
Secret combinations of gestures
To change the logic of the work (for example, to the right earphone only answered calls, and the left to switch tracks), you will need to connect to an Android device with the application installed. Once you set the logic on Android, the headphones will remember the configuration in internal memory and save it when switching to the iPhone.
Compatibility and function table
Not all features available on Android work the same on iOS due to the limitations of Apple’s operating system. Below is a comparison table showing the capabilities of the Mi AirDots Pro 2 in conjunction with the iPhone.
| Function | Status on iOS | Note |
|---|---|---|
| Sound reproduction | Full support | AAC/SBC codecs |
| Microphone (calls) | Full support | It's the noise maker of the calls. |
| Mi Earbuds appendix | Not available. | Android is required to set up |
| Firmware update | Not available. | I need an Android smartphone. |
| Voice assistant | Support for Siri | Triple tap activation |
As you can see from the table, the basic playback and communication functionality is unlimited, but deep customization and firmware upgrades require borrowing an Android device, an important limitation to keep in mind when buying.
💡
To update the firmware and fine-tune the equalizer, you will definitely need temporary access to an Android smartphone with the Mi Earbuds app installed.
Elimination: if the iPhone can't see the headphones
Sometimes pairing can be a mess. If your iPhone doesn't find the Xiaomi Mi AirDots Pro 2 in the device list, the first thing you should do is forget the device in the Bluetooth settings, if you have one, and reboot the phone. Often the problem lies in the hung communication module of the smartphone itself.
Do a full reset to the factory settings. To do this, place them in the case, open the lid and press the touch zones of both headphones simultaneously, holding them for about 10-15 seconds. The indicator should blink several times and go out, which signals a reset configuration.
⚠️ Warning: Make sure the protective film is removed from the charging contacts on the headphones themselves. If the contacts are closed, the headphones may think they are outside the case and not go into pairing mode when the lid is opened.
Also check the iOS version. On very old versions of the operating system (below iOS 12), there may be problems with the stability of the connection of modern Bluetooth protocols. Updating to the current version often solves problems with peripheral visibility.
Features of the microphone and calls
The microphone quality of the Mi AirDots Pro 2 is provided by ENC (Environmental Noise Cancellation) technology, which works automatically on the iPhone, cutting off background street or wind noise during a conversation.
When you call in, double-tapping any of the headphones will allow you to respond, and you can end the conversation with double-tapping or long-holding, depending on the current configuration. It's important to note that when you use a navigator or voice recorder, the headphone microphone becomes active by default.
💡
If the person complains of a quiet voice, wipe the microphone mesh with a soft dry brush. Blockage of the mesh with earwax is a common cause of deterioration in the quality of sound transmission.
Speaking through third-party apps like WhatsApp or Telegram may experience slight audio delay.This is a feature of codecs in iOS and is not a defect of the device. For maximum communication quality, try to keep your iPhone no further than 3-5 meters from you.