How to sync Xiaomi Earphones 2 Basic: full instructions

Xiaomi Earphones 2 Basic wireless headphones have become a popular choice thanks to their affordable price and stable connection, but the process of initial setup can raise questions for new users. Proper synchronization of the device with your smartphone is the foundation for high-quality sound, proper display of battery power and functioning of touch control. Unlike wired counterparts, it requires precise execution of a sequence of actions to create a reliable communication channel through Bluetooth.

In this guide, we will take a look at all the stages of pairing, from preparing a gadget to solving typical connection errors that can occur during operation. You will learn how to activate the search mode on the headphones themselves, how to correctly delete old entries in the memory of the phone and what nuances exist when working with various operating systems. Following these recommendations will allow you to avoid common problems and enjoy music without delays and breaks of the signal.

Preparation of the device for first activation

Before you try to find the device in the list of available networks, you need to make sure that Xiaomi Earphones 2 Basic is ready to work. Charge the case and the headphones themselves to a level of at least 50%, as at low charge the Bluetooth module can work unstable or not turn on at all. Remove both earphones from the charging case; the indicators should light up, signaling the beginning of the activation process.

It is important to understand that when you first remove from the case, the headphones automatically go into pairing mode, as evidenced by a fast flashing indicator. If you are using the device not for the first time, but it does not connect, you may need to force entry into this mode. This usually just press and hold the touch zones on both earphones simultaneously for 5-7 seconds until the indicators start flashing white or blue (depending on the version).

Make sure there are no other active Bluetooth devices in the immediate vicinity that can intercept a signal or cause interference. Signal interference is a common reason why a smartphone can’t detect a headset for a long time. Also check if your headphones are automatically connected to another gadget, such as a tablet or laptop, that is within range.

⚠️ Warning: If the headphone indicators do not light up after being removed from the case, wipe the metal contacts on the headphones themselves and inside the case with dry cloth.

• 🔋 Charge your case and headphones to at least 50% before setting up.
• 📱 Make sure that Bluetooth on your smartphone is activated and visible to other devices.
• 🧼 Wipe the charging contacts if the indicators do not respond to the extraction.
• 🚫 Keep other active Bluetooth gadgets away while pairing.

The process of pairing with Android smartphones

The Android operating system provides ample opportunities for peripheral management, but the connectivity algorithm remains standard for most manufacturers: Open your smartphone settings and go to Connect or Bluetooth. Press the Search for New Devices button or just wait for the system to automatically scan the space around.

The list of available devices should appear Xiaomi Earphones 2 Basic or just Earphones 2 Basic. Click on this name. The system can request confirmation to create a pair — agree with the action. Some shells, such as MIUI or HyperOS, may appear pop-up with animations and the level of charge of each earphone, which confirms successful synchronization.

If you don’t have an automatic connection, try using Xiaomi Earbuds or Mi Buds M8 (depending on region and compatibility), which allows you not only to connect the device, but also to update the firmware. After a successful connection, the headphone icon will appear in the status bar, and the voice assistant can voice the connection message.

It’s worth noting that when you turn on again, the headphones will try to connect to the last device used automatically. If you want to switch to another phone, you must first break the connection on the first gadget or turn off Bluetooth on it.

Configure the connection on iOS devices

iPhone owners can also use Xiaomi Earphones 2 Basic, although the functionality can be slightly limited compared to Android devices.The process starts similarly: open Settings and select the Bluetooth partition. Make sure the slider is activated and the phone starts searching.

Find the name of your headset in the Other Devices list. Click on it to initiate pairing. iOS doesn’t support charge animation pop-ups that are typical of the Xiaomi ecosystem, so battery level will only be visible in the Battery widget or in Bluetooth settings after you connect.

To expand functionality, such as setting up touch controls or updating firmware, iOS owners are advised to download the Xiaomi Earbuds app from the App Store. However, basic synchronization is successful and without installing additional software, ensuring stable audio transmission over SBC and AAC codecs.

💡

On iOS, after connecting, go to Settings → Bluetooth, press “i” next to the headphones and check which microphone is chosen by default to improve call quality.

Table of indicators and their significance

Understanding light can help diagnose the condition of headphones without connecting to a phone, and different blinking modes tell the user about the current status of the device.

Note that the color scheme may vary slightly depending on the batch, but the logic of the work (blinking – search, burning – status) remains the same for the entire Xiaomi line.

Solving synchronization problems

Even if you follow all the instructions, there can be situations when Xiaomi Earphones 2 Basic refuses to sync. Often the problem lies in the Bluetooth cache on your smartphone or desynchronizing the left and right earphones between each other. If the phone sees the device but writes “Connection error” or “Could not hide”, follow these steps.

The first step is to “forget” the device in your phone’s Bluetooth settings. Find Xiaomi Earphones 2 Basic in the list of previously connected devices, click on the gear icon or “i” and select “Cancel pairing” or “Forget.”

Then you need to reset the headphones completely, put both earphones in the case, close the lid. Press and hold the touch zones on both earphones for a period of time. 10-15 It's a second until the lights flash a few times, and it'll clear the headset's internal memory of all previous connections.

⚠️ Attention: When you reset your headphones can turn off on their own. This is a normal reaction. 5-10 seconds for rebooting modules.

If the problem persists, check to see if the list of paired devices on the smartphone itself is full. Some older phone models have a limit on the number of gadgets saved. Removing unused devices can free up the resource for new synchronization.

Using the application for advanced configuration

For maximum experience, it is recommended to install a specialized application. For global versions, this is Xiaomi Earbuds, for Chinese versions of firmware, Mi Buds M8 may be required. These utilities allow you not only to see the exact percentage of charge, but also to adjust the equalizer.

The app also has a section called Sound Settings, where you can choose noise reduction mode (if supported by the model) or transparency mode, and it also updates the headphone software, which often fixes connection bugs and improves the stability of Bluetooth 5.0.

Once you install the app, open it and follow the instructions on the screen to add a new device. The app will prompt you to update your firmware if a new version comes out. Don't interrupt this process by holding your headphones close to your phone.

💡

Using an official app is the only way to update the headphone firmware, which is critical to eliminating software communication errors.

Frequently Asked Questions (FAQ)