Modern wireless headphones have become an essential accessory for many smartphone users, and Xiaomi models are at the forefront of the market due to their affordable price and decent sound quality. However, the initial setup process is often difficult, especially if you are first encountering the ecosystem of a Chinese manufacturer. Proper pairing of the device is not just about turning on Bluetooth, but a whole algorithm of actions that guarantees stable operation and no delays in the future.
In this article, we will discuss in detail all the steps of connecting Xiaomi Airdots to various operating systems, including Android and iOS. You will learn about the nuances of entering pairing mode, how to reset settings when errors and how to optimize the operation of the headset. It is important to understand that even a slight deviation from the instructions can lead to the fact that the headphones will not see each other or the phone.
Before you get to the practical steps, make sure your headphones are sufficiently charged. Low energy levels in the case or the headphones themselves can prevent the successful launch of detection mode. We will look at typical scenarios of the behavior of indicators and explain what it means to flash red or white light.
Preparation of headphones Xiaomi Airdots for the first launch
The first step before you try to sync with your phone is to activate the headphones correctly. Many users mistakenly assume that the device is ready to work immediately after being removed from the box, but this is not always the case. Factory insulation or a discharged battery can block normal functioning. You need to remove both earphones from the charging case and make sure they are on.
Note that LED lights are red when removed from the case, signaling that the lights are not on, and it may be discharged and left on charge for 15-20 minutes. In some cases, it takes a long press on the touchpad to activate the device if it is in deep sleep.
💡
If the indicators flash red and white alternately, it means that the headphones are in search mode and ready to connect.
The critical thing is to synchronize your left and right earbuds before you connect to your phone. Often, the phone only sees one device (usually the right one) and the left one stays inactive. To avoid this, wait for the lights on both earbuds to go out or flash in unison, which indicates that there is an internal link between the channels.
- 🔋 Make sure that the case and headphones are charged at least 50% for stable operation.
- 💡 Check the reaction of LEDs: red glow means charging or turning off, white – readiness.
- 🔄 Wait for left and right channel sync before searching on your phone.
Don't ignore the contact areas on the headphones and inside the case, oxidation or dust can interfere with charging, causing the device to behave unpredictably, and wipe the contacts with dry soft cloth before using.
The process of pairing with Android smartphones
Android provides a lot of control over Bluetooth devices, but Xiaomi Airdots has its own way of connecting. Unlike some other brands, it doesn’t always require a special application for basic configuration, although it does extend the functionality. The standard process starts with activating the wireless module in your smartphone settings.
Open the Settings → Bluetooth menu and make sure the slider is activated. Now put the headphones in pairing mode. Airdots and Redmi Airdots models usually require removing them from the case and, if they are not automatically searched, touch the touch panels on both headphones at the same time or hold them for 5-7 seconds. Indicators should start flashing white often.
☑️ Checking before connection
The list of available devices on the smartphone screen should appear Mi True Wireless EBTS Basic R or just AirDots. Click on it to start the pairing process. The system can request confirmation of pairing - agree with the action. After a successful connection, you will hear a voice message "Connected" in the headphones, and on the phone screen will appear the status "Connected" with the battery level.
If the phone has only found one headphone (like Right) but only plays from one channel, try removing the device from the saved list and repeat the procedure, paying special attention to synchronizing with each other.
⚠️ Note: If two devices with the same name appear in the Bluetooth list, remove them both, put the headphones in the case, close the lid, wait 10 seconds and repeat the procedure again.
Configure the connection on the iPhone (iOS)
Owners of Apple appliances can also successfully use Xiaomi headphones, although the integration will be less deep than with the original AirPods.The connection process on iOS is based on standard Bluetooth protocols, so it is quite simple, but requires attention to detail.The iOS interface strictly controls permissions, so make sure you give the necessary rights when you first start.
Go to Settings → Bluetooth on your iPhone or iPad. Make sure you are in line of sight with headphones. Activate pairing mode on Xiaomi Airdots by extracting from the case and holding touch zones until the indicators flash white. Unlike Android, iOS may not show the charge level of each earphone separately without third-party apps, displaying the overall status.
Find the device in the "Other Devices" list. It can be called AirDots_R Mi True Wireless EBTS Basic L. Tap the name. Once connected, the system can suggest setting up Siri or voice control — you can agree or skip this step. It's important to note that multi-touch gestures on iOS sometimes take extra time to adapt to work properly.
Features of working with iOS
The stability of the connection on the iPhone also depends on the version of iOS. On older versions of the operating system, there may be periodic communication breaks or problems with automatic reconnection when extracting from the case.
Problem Solving: Headphones are not synchronized with each other
One of the most common problems users face is the desynchronization of the left and right earphones, where the phone sees the device but the sound comes from only one channel, requires immediate intervention, and this often happens if one of the headphones is completely discharged or was removed from the case later than the other.
To solve this problem, you need to perform a full reset (Hard Reset). Put both earphones in the charging case. Make sure they start charging (red lights are burning). Then, without removing them from the case, press and hold the touch panels on both earphones for 20-30 seconds. The indicators should blink several times (usually 3-4 times), after which the headphones will be reset to the factory settings.
Once reset, delete the old headphone record in your phone's Bluetooth menu. Close the case cover, open it again and remove both headphones at the same time. Now they must automatically find each other: the indicator on one will go out or flash slowly, and on the other often, which means successful creation of a stereo pair.
| Status of the indicator | Meaning | User action |
|---|---|---|
| Burning red. | Charging or off. | Leave in the case or remove for inclusion |
| Blinks white often | The mode of pairing (Pairing) | Search for the device in Bluetooth phone |
| Blinking white slowly | Connected to the phone. | We can use it. |
| Blinks red and white | Low battery charge | I need you to charge. |
If the problem persists after the reset, check if the contacts are not contaminated, and it is also worth trying to connect the headphones to another phone to rule out a malfunction of the Bluetooth module of the main device.
Use the Mi True Wireless EBTS Basic app
For owners of Android smartphones, especially models Xiaomi, Redmi and POCO, strongly recommended to use the proprietary application Mi True Wireless EBTS Basic. This software tool allows you not only to track the level of charge of each headphone and case in real time, but also to customize the functionality of touch control.
You can download the app from the Google Play Store or Mi GetApps. Once installed and launched, the program will automatically detect the connected headphones. In the application interface, you can change the assignment of actions for double or triple touch, for example, configure a voice assistant call or switch tracks, which is impossible with standard system tools.
In addition, the app can check the firmware version of the headphones, the manufacturer periodically releases updates that improve connection stability and sound quality. If a new version of the software is available, the application will prompt you to install it. During the update, it is strictly forbidden to remove the headphones from the case or move away from the phone, as this can lead to a breakage of the device.
- 📱 Accurate monitoring of left, right headphone and case charge.
- 🎛️ Flexible setting of touch commands (double, triple touch).
- 🔄 Update of embedded software (Firmware).
iOS users may face limitations: the app may not see headphones or have stripped down functionality, in which case basic control remains available through standard Bluetooth settings, but fine tuning may not be available.
Frequent Questions and Answers (FAQ)
Why does the phone only see one headphone (Right or Left)?
Can you use only one headphone Xiaomi Airdots?
How to reset headphones to factory settings?
Does Xiaomi Airdots support the aptX codec?
What to do if the headphones sound quiet?
💡
Correct synchronization of the left and right earphones is a key step, without which stereo sound is impossible.
In conclusion, Xiaomi Airdots is a reliable device that, when properly configured, lasts for years, following simple rules of operation, regularly cleaning contacts and timely updating of firmware through the application will help to avoid most technical problems. If none of these methods helped, there may be a hardware malfunction that requires contacting the service center.