Xiaomi 13 Pro: 120Hz screen frequency – a complete guide to setup and optimization

Xiaomi 13 Pro – flagship smartphone of 2023, which combines top-end performance, advanced cameras from Leica and one of the best AMOLED-But there are still questions among users: how much hertz does the display support, how do you turn on the maximum refresh rate, and should you use adaptive mode? In this article, we will analyze all the nuances of working with 120 Hz on Xiaomi 13 Pro, including hidden settings, the impact on autonomy and comparison with competitors.

If you’ve just purchased this smartphone or are planning to buy it, it’s important to understand that screen refresh rates aren’t just a marketing parameter; they’re a function of the smoothness of animation, interface response, and even reading comfort. We tested all display modes and collected up-to-date data on how the actual refresh rate changes depending on the content and settings. MIUI. You will also learn why the screen sometimes slows down despite the claimed 120 Hz, and how to fix it.

How many hertz Xiaomi 13 Pro: official and real data

According to the manufacturer’s specifications, Xiaomi 13 Pro is equipped with 6.73-inch E6 AMOLED-It's a screen that supports refresh rates up to 120Hz, but that doesn't mean that the display is always at the highest frequency:

• 📱 Content type (video, games, interface) MIUI, reading).
• 🔋 Power saving mode (whether Ultra Battery Mode is enabled»).
• 🎮 Developer settings (if forced restrictions are activated).
• 🔄 Adaptive Synchronization (AdaptiveSync Technology).

Important: in standard settings MIUI The maximum frequency is limited to 60 Hz to save charge. To unlock 120 Hz, you need to manually change the parameters.

To check the current refresh rate, you can use applications like Display Tester or DevCheck. In our tests, the Xiaomi 13 Pro showed a stable 120 Hz in menus and games, but reduced to 1-10 Hz when viewing static images (for example, in a gallery or when reading books). It's normal behavior for LTPO-Displays that optimize energy consumption.

How to turn on 120 Hz on Xiaomi 13 Pro: step-by-step instructions

By default, the Xiaomi 13 Pro runs at 60Hz or in adaptive mode. To force the 120Hz setup, follow the following steps:

1. Open the Settings → Display.
2. Select the screen refresh rate.
3. Slip on 120Hz (if you don’t have an option, see the next section).
4. Confirm the choice - the screen will blink, and the frequency will change.

If the menu does not have a 120Hz option, it can mean:

• 🔋 Active Power Saving Mode (turn it off in Settings) → Battery).
• 📱 Installed custom firmware with restrictions.
• 🔧 Developer settings with forced restriction are included FPS.

Once activated, 120Hz will allow you to see smoother scrolling, animations and improved gaming response, but this will increase battery consumption by 15 to 25 percent depending on the use case.

⚠️ Warning: Forced inclusion of 120Hz in games not optimized for high frequency (e.g. Genshin Impact or PUBG Mobile, can lead to overheating and decrease FPS. In such cases, it is better to use the adaptive mode.

Adaptive refresh rate: what it is and how it works on Xiaomi 13 Pro

Xiaomi 13 Pro supports AdaptiveSync technology, which automatically adjusts the screen frequency to the content.

• 🎬 Video viewing: frequency synchronized with frame rate of the video (24/30/60 Hz).
• 🎮 Games: if the game supports 120 FPS, screen switches to 120 Hz.
• 📖 Reading: With a static image, the frequency drops to 1–10 Hz to save energy.
• 🏃 Interface. MIUI: smooth scroll menu - up to 120 Hz, static elements - up to 60 Hz.

To enable adaptive mode:

1. Go to Settings → Display → Screen refresh rate.
2. Choose Adaptive (or Auto in some versions) MIUI).

Advantages of Adaptive Mode:

• ⚡ Battery savings of up to 30% compared to fixed 120 Hz.
• 🎯 Optimal smoothness without excessive energy consumption.
• 🔧 Automatic setting without manual intervention.

Disadvantages:

• ⚠️ Sometimes there are microstuttering when switching frequencies (especially noticeable in games).
• 📉 In some applications (such as TikTok or YouTube), the frequency can be fixed at 60 Hz despite support for higher values.

💡

If the adaptive mode is unstable, try calibrating the smartphone sensors: go to Settings → The phone. → All specifications and tap 5 times on the CPU Core. In the developer menu, activate the option to Disable the refresh rate limit (if available).

Comparison of screen frequency Xiaomi 13 Pro with competitors

For an objective assessment, let’s see how Xiaomi 13 Pro competes with other flagships of 2022-2023 in terms of screen refresh rate:

As can be seen from the table, Xiaomi 13 Pro is not inferior to competitors in terms of technical characteristics, but there are nuances:

• 🍎 iPhone 14 Pro Max has more aggressive optimization of adaptive frequency, which has a positive effect on autonomy.
• 🤖 Samsung Galaxy S23 Ultra supports 120 Hz even at resolution QHD+, The Xiaomi 13 Pro is the same as the 2K frequency may automatically decrease.
• ⚡ OnePlus 11 offers more flexible adaptive mode settings (e.g. manual 90Hz limit).

However, the Xiaomi 13 Pro beats most of its competitors in color reproduction (Dolby Vision certification and the Dolby Vision certification). HDR10+) and brightness (up to 1900 nits in peak mode).

💡

Xiaomi 13 Pro is using the LTPO 3.0 is the most advanced version of the technology that allows smoothly adjusting the frequency from 1 to 120 Hz without jumps. LTPO 2.0 (for example, in the iPhone 12 Pro).

The Impact of 120 Hz on Autonomy: Tests and Recommendations

One of the big questions users have is, how fast is a battery going to run down at 120Hz?

• 📱 60 Hz mode: 7-8 hours of active screen (social networks, instant messengers, video).
• 🔥 120 Hz mode: 5-6 hours of active screen (falling on the screen) ~25%).
• ⚡ Adaptive mode: 6-7 hours (optimal balance).

Recommendations for optimizing autonomy:

1. Use adaptive mode in everyday tasks.
2. Forced to turn on 120Hz only in games or when viewing high frame rate content.
3. Turn off 120Hz in the developer settings for individual apps (such as Chrome or Telegram) where high frequency is not critical.
4. Activate Ultra Battery Mode in Settings → Battery if you need to extend the operating time (limit the frequency to 60 Hz).

Interesting fact: in tests with 120 Hz turned on and 2K-Xiaomi 13 Pro resolution showed battery consumption at the level of Samsung Galaxy S22 Ultra, but lost iPhone 14 Pro Max on the ~15% due to less optimized processor Snapdragon 8 Gen 2 (compared to Apple) A16 Bionic).

⚠️ Note: If after turning on 120 Hz smartphone began to warm up, check the background processes in Settings → Annexes → Permits → Auto-run: Some programs (such as Facebook or TikTok) can load the processor, which, combined with a high screen frequency, causes overheating.

Screen frequency issues on Xiaomi 13 Pro and their solutions

Despite the advanced technology LTPO 3.0, users are sometimes affected by bugs. Let's look at the typical problems and how to fix them:

1.The screen frequency spontaneously decreases to 60 Hz

Reasons:

• 🔋 Power saving mode is on.
• 📱 The app does not support high frequency (e.g. Netflix or banking apps).
• 🔧 Failure to work MIUI (reboot).

Solution: Turn off power saving, update firmware or force 120Hz in the developer settings (Settings) → The phone. → Version. MIUI, Tap 7 times to unlock the developer menu).

2. flickering or twitching of the screen when scrolling

Reasons:

• 🖥️ Conflict with the shell MIUI (especially in beta versions).
• 🎮 Incompatibility with a game or application.
• 🔌 Hardware defect (rarely, but possible).

Solution: Turn off the adaptive frequency, reinstall the problem app, or reset the display settings (Settings) → Display. → Resetting screen settings).

3.In games, the frequency does not rise above 60 Hz.

Reasons:

• 🎮 The game is not optimized for 120 FPS (For example, Call of Duty Mobile requires manual inclusion in graphics settings).
• 🔧 In the developer settings set a limitation Force 60Hz.
• 🔋 Active Performance Mode Balanced instead of High.

Solution: In the game settings, select the maximum FPS, Turn off the restrictions in the developer menu and set the performance mode to High (Settings) → Battery → Performance mode).

Hidden screen frequency settings: how to unlock additional options

V MIUI There are hidden parameters that allow you to fine-tune the screen to access them:

1. Activate the Developer Menu: Go to Settings → The phone. → Version. MIUI And tap it 7 times.
2. Go back to the basic settings and open a new section for developers.
3. Find options related to the display: Minimum refresh rate (set 1 Hz for maximum savings); Disable refresh rate restriction (resolves 120 Hz in all applications); Power on 120 Hz (forced mode, but increases heating).

Warning: Not all options on the developer menu are safe, for example, forcing 120Hz on unsupported apps can lead to:

• ⚠️ Image artifacts (frame gaps, flickering).
• 🔥 overheating due to increased load on GPU.
• 📉 Accelerated battery discharge (up to 40% in 3-4 hours of active use).

We recommend using hidden settings only for testing and returning default values after experiments.

💡

To quickly switch between frequencies, add a shortcut to the notification bar: lower the curtain, tap on the ⚙️ → Edit → Add the tile refresh rate.

FAQ: Frequent questions about Xiaomi screen frequency 13 Pro