“Urgent Recording” on the registrar Xiaomi: decryption, reasons and solutions

You turned on the Xiaomi DVR and suddenly you saw on the screen the words "Urgent Recording"** - what does it mean? It probably signals an emergency situation, but it's not always a critical error.

— What is hidden behind this message in different models of registrars (from Xiaomi) 70Mai to Mi Car Recorder);

Why the emergency recording mode is activated spontaneously;

How to disable Urgent Recording if it interferes with normal operation

What to do if the message does not disappear even after the reboot.

You will also learn how to distinguish a real emergency record from a firmware failure and when to contact the service center.Spoiler: 80% of the time, the problem can be solved by yourself in 5 minutes.

What is Urgent Recording on Xiaomi Registrars?

Urgent Recording (literally - "urgent recording") is an emergency mode of the DVR, which is automatically activated when:

• 🚨 Accident or sudden braking (G-sensor is triggered);
• 🔋 Critical charge level (if the recorder is connected to the lighter and the voltage on-board network fell below 11.5V);
• 📁 Memory overload (when the free space is less than 5% of the total card size);
• 🔄 Firmware failure (if the system cannot correctly write the file in normal mode).

In this mode, the registrar:

• 📹 Records video in maximum resolution (even if the settings were lower mode);
• 🔒 Blocks files from deletion (they are marked as protected);
• 📡 Can turn off Wi-Fi and Bluetooth to save energy;
• 🔊 Sometimes it emits an audible signal (depending on the model).

Urgent Recording should disappear automatically after the cause is eliminated, and if it doesn't, then the problem is deeper.

What models Xiaomi meets Urgent Recording

The urgent recording mode is available in almost all registrars Xiaomi and 70Mai, But it's implemented in different ways. This is how it works in popular models:

In new models, for example, 70Mai Dash Cam A800S) Urgent Recording can be activated even when the lighting changes dramatically (e.g. when entering a tunnel). HDR.

If your model is not in the table, check the instructions or settings menu. Usually, the information about the urgent record is in the Emergency Recording or G-Sensor Settings section.

Why Urgent Recording is Not Disappearing: 5 Reasons Why

If the Urgent Recording label is constantly hanging, the problem lies in one of the following factors:

1. Xiaomi Registrars are demanding on speed and class of cards. if you use a microSD below Class 10 or UHS-I, The device may be permanently in emergency mode due to recording errors.
2. After an incorrect update or power outage during recording, the system may freeze in Urgent Recording mode. Often helps reset to factory settings.
3. If the voltage in the on-board network of the car is unstable (for example, due to a poor battery or poor-quality adapter of the cigarette lighter), the recorder will perceive this as an emergency situation.
4. Dust, moisture, or oxidation of the memory card contacts can cause read/write errors, provoking an urgent mode.
5. If the impact sensor is oversensitized, the recorder will fire on each bump or braking, which in some models leads to permanent Urgent Recording.

To determine the exact cause, try alternately:

1. Remove and insert the memory card back;
2. Connect the registrar to another power source (e.g., powerbank)
3. Reset the settings to factory (Settings) → Reset → Reset);
4. Update the firmware through the official Mi Home app.

How to disable Urgent Recording on Xiaomi Registrar

If the emergency recording mode interferes with normal operation, it can be deactivated.

1. Disconnect via the settings menu

Most of the Xiaomi models and 70Mai Urgent Recording is tied to the G-sensor to turn it off:

1. Go to Settings. → Security → G-Sensor;
2. Set the sensitivity to Low or turn it off.
3. Find the Emergency Recording item and deactivate it.

Make sure the memory card is correct

Check the voltage in the onboard network (should be 12.6V-14.4V)

Save important files from the registrar to the computer

Update the firmware to the latest version

-->

2. Reset to factory settings

If the message does not disappear after the reboot:

1. Press the Power button for 10-15 seconds until you hear the beep.
2. In the menu, select Reset to Default.
3. Confirm the reset (sometimes required to enter) PIN-default code: 0000 or 1234).

⚠️ Warning: After reset, all settings and saved files (except those that are protected) will be deleted. If you want to save videos, copy them to your computer first.

3. Manual formatting of memory card

If there is a problem in the file system:

1. Remove the card and connect it to the PC;
2. Copy important files;
3. Format in FAT32 cluster size 32 KB;
4. Push the card back in and reboot the registrar.

💡

If the registrar does not see the card after formatting, try formatting it directly in the device: → Warehouse → Format.

4. Firmware update

Outdated software can cause false positives to Urgent Recording.

1. Download the latest firmware for your model from the official Xiaomi website;
2. Copy the.bin file to the formatted memory card.
3. Insert the card into the registrar and turn it on – the update will begin automatically.

Firmware links:

• 🌐 Xiaomi official website (Firmware section»);
• 📥 Forum 4PDA (If there are no updates on the official resource).

What to do if nothing helps

If you’ve tried all the ways but the Urgent Recording label is still burning, the problem may be:

• 🔧 Hardware malfunction (memory module damaged, power controller burned);
• 📱 Failure of the firmware (if the firmware “flyed off” due to a voltage jump);
• 🔌 Incompatibility with the car (for example, in some cars, Xiaomi registrars conflict with the car) CAN-tire).

In these cases:

1. Contact the service center (if the device is warranty), the addresses can be found on the Xiaomi website or at official dealers;
2. Try to flash the registrar manually through USB-OTG (Instructions are available on thematic forums);
3. Check compatibility – some Xiaomi models do not work properly with Toyota, Hyundai and Kia cars due to the peculiarities of electronics.

💡

If the registrar stopped turning on after the appearance of the Urgent Recording label, do not try to disassemble it yourself - this can lead to loss of warranty.

⚠️ Warning: If the recorder is constantly overheating (the body is hot to the touch) and Urgent Recording is burning, immediately disconnect it from power.

How to Prevent Urgent Recording in the Future

To avoid false alarms of emergency mode:

1. Choose the right memory card

Use the cards with:

• 📁 Speed class not lower than Class 10 or UHS-I (U1/U3);
• 🔄 Up to 128GB (some models don’t support 256GB or higher);
• 🏷️ SanDisk brand, Samsung EVO Kingston Canvas (optimized for DVRs).

2.Tune the G-sensor.

The sensitivity of the impact sensor shall be appropriate for the conditions of use:

• 🚗 For the city: Medium;
• 🏞️ For off-road: Low;
• 🚑 For taxi/car sharing: High (but be prepared for false positives).

3. Watch the feeding.

Use this:

• 🔌 Original adapter lighter from Xiaomi;
• 🔋 Stress stabilizer if your car has frequent jumps;
• 🔄 A recorder with supercapacitor support (e.g, 70Mai A800S), If you are using the device in the cold.

4. Regularly update firmware

The manufacturer periodically releases patches that fix bugs with false positives Urgent Recording. Check updates every 2-3 months.

5. Format the card every 1-2 months

The file system on the microSD gets clogged over time, which can lead to write errors, and regular formatting (directly in the registrar) helps to avoid problems.

Frequent questions about Urgent Recording