How to Include a Smart Cover on Xiaomi Redmi Note 8 Pro: A Complete Guide to Secrets

Xiaomi Redmi Note 8 Pro is one of the most popular mid-range smartphones, still in use today for its performance and functionality. One of the useful accessories for this model is the smart cover, which not only protects the screen, but also expands the capabilities of the device. However, many users face the problem: how to properly turn on and configure this cover to work at full power?

In this article, we will discuss all ways to activate the smart cover on the Redmi Note 8 Pro, including setting up the smart cover. NFC-chips (if you have one in your cover model), gesture control, solving typical problems, and even hidden features that are not written about in the official instructions. You will learn how to make the cover automatically lock/unlock the screen, run apps with one touch, and avoid common customization errors.

Not all smart covers for the Redmi Note 8 Pro are the same! some support only basic features (lock/unlock) and others are equipped with the same. NFC-We'll tell you how to identify your cover features and make the most of them.

What is a smart cover and what are the views for the Redmi Note 8 Pro

A smart cover is a protective case with built-in sensors or magnets that interact with a smartphone. In the case of the Redmi Note 8 Pro, these covers fall into three main types:

• 🔹 The basic smart cover locks/unlocks the screen when it opens/closes, works through a magnetic sensor (hall sensor), the most budget and common option.
• 🔹 Cover with NFC-chip – in addition to locking the screen, allows you to adjust quick actions (for example, starting the camera or turning on the flashlight when touching the tag.
• 🔹 The Smart View Cover is a rare variant for the Redmi Note 8 Pro, displaying time, notifications and other data on the external screen.

The Redmi Note 8 Pro generally supports all three types, but the functionality depends on the firmware. For example, custom firmware (such as LineageOS or Pixel Experience) may not work some gestures or NFC-Also, you should consider that cheap non-original covers often have compatibility problems — the magnet may be too weak, or the sensor will fire with a delay.

To check what cover you have, pay attention to:

• 🏷️ Having a Xiaomi or Mi logo on the inside – original accessories usually have a marking.
• 🧲 Magnet strength – if the cover doesn’t hold well on the smartphone, it could indicate a fake.
• 📱 Smartphone reaction – when opening / closing the cover, the screen should be instantly locked / unlocked (without delays).

How to enable the basic lock/unlock screen function

If your smart cover doesn’t work out of the box, the first thing you do is check if the screen lock function is activated. In most cases, it turns on automatically when you first connect the cover, but sometimes you need to manually adjust it.

Instructions for activation:

1. Make sure the cover is properly installed on the smartphone – the magnet should be in the top (near the front camera).
2. Open the Settings. → Display. → Screen lock and password.
3. Scroll down and find Smart Lock (or Smart Cover in English firmware).
4. Activate the switch next to Enable the Smart Cover.
5. If there is no item, update the firmware to the latest version (more on this in the next section).

After activation, check the work of the cover:

• 🔒 When the cover is closed, the screen should be locked instantly (without pressing the power button).
• 🔓 When opening the cover, the screen must unlock before entering the password (if installed). PIN graphical).
• 🚫 If the screen is not responding, check the position of the magnet or try to restart the smartphone.

If the cover still doesn’t work, the problem may be:

• 🔋 Weak magnet – try gluing an extra neodymium magnet (3×1 mm) near the main.
• 📱 Damaged Hall sensor – if the smartphone fell, the sensor could fail (diagnosis is required in the service center).
• 🛠️ Incompatible firmware – on some custom firmware, the smart cover function is disabled at the core level.

Setting up NFC In a smart cover (if supported)

Some smart covers for the Redmi Note 8 Pro are equipped NFC-So you can use a tag to adjust the speed of action, for example, you can program the cover so that when you touch it, you can actually do it:

• 📸 The camera automatically started up.
• 🔦 The flashlight went on.
• 🎵 My favorite music app has been opened.
• 📞 Beginning a call to a frequently used number.

To set up NFC-tag, follow the following steps:

1. Make sure that NFC enabled on smartphone: Settings → Connection and sharing → NFC.
2. Download the programming application NFC-markers, for example: NFC Tools (simple interface, suitable for beginners). Trigger (advanced automation settings). Mi NFC (Xiaomi’s official app, but may not support all tags).

Write down the tag

Attach your smartphone to the label on the cover (usually it is located on the inside, next to the magnet).

Select the action to be performed when touching (such as launching an app or changing your sound profile).

Save the settings and check the work.

Important nuances when working with NFC-marker:

• 📱 The label can be disposable - after recording the action, it cannot be reconfigured (depending on the type of chip).
• 🔋 If the tag doesn't work, try calibrating. NFC smartphone-setting.
• 🛡️ Some labels are blocked after several failed recording attempts – in this case, only a cover replacement will help.

💡

If NFC-The label on the cover stopped working, try to demagnetize it by holding it next to a strong magnet (like a speaker) for 10 seconds.

Problem Solving: The cover doesn’t work or doesn’t work properly

If the smart cover on the Redmi Note 8 Pro doesn’t lock the screen, is delayed, or behaves unpredictably, the reasons may be both software and hardware.

1.The cover does not block/unlock the screen

Possible causes and solutions:

• 🔋 Weak magnet. → Stick an extra neodymium magnet (3×1 mm) near the main.
• 📱 Hall's sensor is down. → Check in Settings → Special facilities → Sensors (if there is a point).
• 🔄 Firmware failure → Reset the settings to factory (Settings) → The phone. → Resetting settings).
• 🛠️ The cover connector is damaged. → Check if there is any dirt or oxidation on the contacts (relevant for covers with a Type-C connector connection).

2. NFC-tag doesn't work

What to do:

• 📶 NFC switched off → Enable in Settings → Connection and sharing → NFC.
• 🔄 Label blocked. → Try to re-write it through another application (for example, NFC Tools Pro).
• 🛡️ Conflict with other labels → Delete all the saved ones. NFC-tags in smartphone settings.
• 📱 Incompatible firmware → Update. MIUI Up to the latest version or install a patch for NFC (For example, through Magisk).

3.The cover interferes with wireless charging

If you use smart cover wireless charging, there may be problems:

• 🔋 The smartphone is not charging → Remove metal elements (magnets) away from the charging coil.
• ⚡ Overheating → Remove the cover for charging time or use thin covers without metal inserts.
• 📱 Slow charging. → Check the compatibility of the charger (should support Qi standard).

💡

If the smart cover stopped working after the update MIUI, Try to roll back on the previous firmware version or install a patch for the Hall sensor via Magisk.

⚠️ Warning: If after installing the smart cover, the smartphone starts to spontaneously reboot, the problem is most likely to be the short circuit of the magnet with the board!

Hidden Smart Cover Features You Didn't Know About

Many Redmi Note 8 Pro users use the smart cover only to lock the screen, without even knowing about its hidden features. Here are 5 little-known chips that will make your interaction with your smartphone more convenient:

1. Quick application launches

If your cover supports NFC, You can program it to launch:

• 📷 Cameras are one touch and you are ready to shoot.
• 🎵 Music player – for example, Spotify or Yandex Music.
• 📞 Calling a frequently used number (e.g. home or work).
• 📍 Navigator – automatically opens Google Maps or Yandex Maps with the latest route.

2. Automatic activation of the "Do Not Disturb" mode

With apps like Tasker or MacroDroid, you can customize the cover so that when you close it:

• 🔕 The sound and vibrations went off.
• 🌙 The night mode (dark theme) was turned on + brightness).
• 📵 Notifications from social media were blocked.

For this:

1. Install Tasker from Google Play.
2. Create a new profile with condition condition → Sensors. → Magnetic sensor (Hall sensor).
3. Add the audio action → Don't disturb mode".
4. Save it and test it.

3. Use of the cover as a stand

Some of the smart covers for the Redmi Note 8 Pro have a folding design that allows them to be used as a stand for watching videos.

• 📺 Do not open the cover at an angle of more than 45 degrees.
• 🔋 Avoid pressure on the screen when folded.
• 🛠️ Periodically clean the mechanism from dust (you can use compressed air).

4. Hidden pocket for SIM-card

Some smart covers have a secret storage pocket:

• 💳 Spare. SIM-map.
• 🏦 Bank card (if the cover of the card) RFID-protection).
• 🔑 Keys to a mailbox or office.

Important: If a bank card with a chip is stored in your pocket, make sure the cover has a RFID-screening, otherwise the card data can be read by fraudsters!

5. Indication of notifications through LED

Some original Xiaomi covers support light notifications through a small LED-To enable this function:

1. Go to Settings → Notifications → Notification indicator.
2. Turn on the light indication option.
3. Choose colors for different types of notifications (calls, SMS, messengers).

💡

If your cover doesn't have it. LED-Indicator, but you want to see notifications without opening it, install Always On Display and set up time and notification display on the locked screen.

Update firmware for the correct operation of the smart cover

If the smart cover is unstable (for example, the screen is locked with a delay or NFC-The tag doesn't work, the problem may be with outdated firmware. Xiaomi regularly releases updates that correct sensor errors and improve compatibility with accessories.

How to update the firmware on Redmi Note 8 Pro:

1. Go to Settings → About the phone → System update.
2. Click Check for updates.
3. If a new version is available, download it and install it.
4. After the update, be sure to restart the smartphone.

If automatic updates don’t help, try manual installation:

1. Download the latest firmware for Redmi Note 8 Pro (codename begonia) from the official Xiaomi website.
2. Place the file in the root folder of internal memory (not in the folder!).
3. Go to Settings. → The phone. → Updating the system → Threefold (⋮) → Select a firmware file.
4. Select the downloaded file and wait for the installation to be completed.

What if the cover stopped working after the update?

• 🔄 Reset the Hall sensor settings: Settings → Annexes → Application management → Threefold (⋮) → Reset application settings.
• 📱 Clear the system cache: Settings → Memory. → Clear the cache.
• 🛠️ Install a patch for the sensor via Magisk (if you have root rights).

⚠️ Note: If after the update, the smartphone stopped seeing NFC-The label on the cover, try to roll back to the previous version MIUI or install a module "NFC Fix" via Magisk. in some cases, a full resetting (Wipe via Recovery) helps).

Smart Cover Alternatives: What to Do If Your Model Is Not Supported

If your cover doesn’t work with the Redmi Note 8 Pro or you want to expand the functionality, consider alternative solutions:

1.Magnetic stickers for Hall sensor

If you have a regular case without a magnet, but you want to get a smart lock feature, you can:

• 🧲 Buy a neodymium magnet (3×1 mm) and glue it inside the cover at the top.
• 📱 Enable the smart lock function in the settings (as described above).
• 🔧 If necessary, calibrate the sensor through the engineering menu (#4636##).

2. Automation applications

With apps like Tasker or Automate, you can emulate the smart cover feature:

• 📱 Set the trigger to date/time (e.g. lock screen at 23:00).
• 🔋 Use a proximity sensor – the screen will lock when you remove the smartphone from your face.
• 📍 Program geofences – Automatic locking when leaving the house.

3. Contactless tags (NFC-sticker)

If your cover doesn't have NFC, But you want to use quick commands:

• 🏷️ Buy it. NFC-stickers (e.g., stickers, NTAG215) And stick them on the back of the cover.
• 📱 Program them for the right actions through NFC Tools.
• 🔧 For convenience, use a transparent case so that the marks are not lost.

4. Smart watch or fitness bracelet

If the cover seems uncomfortable, replace it with:

• ⌚ Xiaomi Mi Band – lock the screen when moving away from the smartphone.
• 📱 Smartwatches (such as Amazfit) – Notification management and fast access to applications.

Comparison of alternatives:

💡

If you only need a lock screen, a magnetic sticker is the most budget-friendly and easy solution. NFC-tags.

FAQ: Frequent questions about the Xiaomi Redmi Note smart cover 8 Pro