Xiaomi Mi TV Stick: how to connect to the TV in 5 minutes - instructions with photos and tips

Xiaomi Mi TV Stick

HDMI

Android TV

Google Play

ensemble

Many users face problems already at the stage of physical connection: the console does not turn on, there is no image or sound, Wi-Fi does not work. HDMI-We've put together step-by-step instructions for different TV models, LG, Sony et al., and added tips for optimizing the console after the connection.

If you just unpacked the Mi TV Stick, you don't know where to start, this is for you, and if it's already connected but it's not stable, you'll find solutions to fix lags, or problems with sound or network, and for owners of televisions, no lags. HDMI We have prepared alternative connection schemes through adapters.

1.What is included in the kit Xiaomi Mi TV Stick and what you need more

Before connecting, check the contents of the box. in the standard set of Xiaomi Mi TV Stick (Models 2021-2026) is included:

• 📦 The Mi itself. TV Stick (black or white depending on version)
• 🔌 Cable USB Type-C → USB-A feeding
• 📶 Remote control with batteries (usually 2)×AAA)
• 📄 Short instructions in several languages (including Russian)

In addition, you will need:

• 🔌 Power source: You can use it USB-TV port (if it is issued) ≥5V/1A) or network adapter (for example, from a smartphone). 5V/2A — This will reduce the risk of overheating.
• 📺 Free port HDMI on television (preferably) HDMI 2.0 for support 4K)
• 🌐 Access to Wi-Fi (the console does not have an Ethernet port)

If your TV is released before 2010 and does not have any HDMI, an adapter (for example) will be required, HDMI → AV (RCA) or HDMI → SCART). Please note that in this case the maximum permit will be limited. 720p, The image delay may increase.

⚠️ Do not use cheap Chinese adapters without an active chip – they often do not support protection. HDCP, This may cause a "No Signal" error or black screen to appear on the screen.

2. Step-by-step instructions: how to connect Mi TV Stick to the TV through HDMI

The standard connection takes no more than 5 minutes.

1. Choose. HDMI-If you have multiple ports, you'd better use the port. HDMI 1 or port marked ARC (It usually supports more functions).
2. Connect the console to HDMI-If the port is on the side, use an extension cord. HDMI (comes with some models to avoid mechanical pressure on the connector.
3. Connect the power: ⚡ Through USB-TV port (if it gives enough current). ⚡ Network adapter (recommended for stability).

Turn on the TV.

HDMI-port

Source

Input

Wait for loading.

Mi TV

If the image does not appear:

• 🔄 Reconnect the console to another HDMI-port.
• 🔌 Check the power cable - there may be a lack of power.
• 📺 Restart the TV (remove the plug for 30 seconds).

If the console boots but you see the message “No Internet”, go to the section about setting up Wi-Fi.

3. Wi-Fi and first start: what to do if there is no connection

After the physical connection, Mi TV Stick will suggest setting up the network, and it can be difficult to do that, especially if you're a network operator:

• 📶 Your router uses 5 GHz (the console supports only 2.4 GHz in the base models).
• 🔒 The net is hidden (SSID broadcast).
• 🛡️ Use a non-standard type of encryption (for example, WPA3 instead WPA2).

Instructions for connecting to Wi-Fi:

1. On the greeting screen, select the language (there is Russian).
2. In the Network menu, select your Wi-Fi network from the list.
3. Enter your password (use the remote or Mi Remote app on your smartphone for convenience).
4. If the network is not listed: 🔄 Reboot the router. 📡 Check that the router broadcasts the network in the 2.4 GHz band. 🔧 In the router settings, turn off filtering by MAC-address.

If the console does not connect to Wi-Fi despite the correct password:

• 🔄 Reset your network settings on the console: go to Settings → Network → Forget the net.
• 📱 Use the access point from your smartphone (distribute Wi-Fi from your phone and connect the console to this network).
• 🔧 Update the router’s firmware (outdated models may not support modern protocols).

⚠️ Note: If your router only works in the 5GHz band, you will either have to change the router settings (enable 2.4GHz) or use a USB-Ethernet adapter (an informal solution that requires root rights).

4. Optimal image and sound settings after connection

Once you've successfully connected to the network, the console will suggest adjusting the screen resolution, and it's important to choose the settings that your TV supports, or the image will be cropped or flicker.

Recommended settings:

If the image is "blurred" or "pixelated":

• 🔍 Check the cable. HDMI — It must support high speed (for example, for the 4K).
• 📺 In the TV settings, turn off post-processing (e.g., Motion Smoothing on Samsung).
• 🔧 On the prefix Settings → Display and sound → Include corrections. HDMI.

To tune the sound:

• 🔊 If there is no sound, check what is in the settings. → Sound. → Exit chosen HDMI.
• 🎵 For home theater, select Dolby Digital (if supported by a receiver).
• 🔇 If the sound is late, turn it off. AV-synchronization in the settings of the TV.

💡

If your TV is supported HDR, But the colors look dull, in the settings of the consoles turn on HDR-set the brightness to 100% in the parameters HDMI.

5. Alternative ways of connecting: if there is no TV HDMI

If your TV is older than 2010, it probably doesn’t. HDMI-In this case, there are a few workarounds:

Method 1: Through the adapter HDMI → AV (RCA)

• 🔌 Buy an active adapter (for example, Portta) PETHD1080P). Passive adapters are not working!
• 📺 Connect the adapter to HDMI prefixes, and RCA ("tulips") - to the TV.
• ⚡ Provide food for the adapter through USB (usually comes in a kit).

Cons: Maximum resolution — 720p, possible delay of sound ~0.5 sec.

Method 2: Through HDMI → SCART

• 🔌 Suitable for European TVs with connector SCART.
• 🔧 Requires an adapter with a chip converter (for example, Neoteck) NTK058).
• 📶 The quality of the image will be worse than through HDMI.

Method 3: Through HDMI → VGA

• 🖥️ You need to connect to monitors or projectors.
• 🔌 Use an externally powered adapter (e.g. Rankie) HDMI to VGA).
• 🔊 The sound will have to be output separately through 3.5 mm jack.

⚠️ Note: When using Mi adapters TV Stick may not recognize the remote control. In this case, control the console through the Mi Remote app on your smartphone or connect a Bluetooth keyboard.

6.Typical problems after connection and their solution

Even after a successful connection, users encounter bugs, and here are the most common ways to fix them:

Problem 1: The console overheats and turns off

• 🔥 Make sure the console is not closed in a tightly sealed space (for example, behind the TV).
• ⚡ Use the original power adapter (some cheap charging gives unstable voltage).
• 🔄 Update the firmware – in new versions, energy consumption is improved.

Problem 2: Lags and brakes when watching videos

• 📶 Check the speed of Wi-Fi (should be) ≥10 Mbps for Full HD).
• 🔧 In the settings of the consoles, turn off the animation of windows (Settings) → The device → About the programme → Build Number – tap 7 times to unlock Developer Mode).
• 🗑️ Clear the app cache: Settings → Annexes → Select the application → Clear the cache.

Problem 3: No sound through HDMI

• 🔊 In the settings of the TV, select PCM Auto's on the sound menu.
• 🔧 On the console, go to Settings → Display and sound → Digital sound (SPDIF) and select Off..
• 🔄 Reconnect. HDMI-cable (sometimes helps hot port switching).

Problem 4: The remote is not working

• 🔋 Replace batteries (even if they are new – sometimes factory defects).
• 📱 Use the Mi Remote app as a temporary replacement.
• 🔍 Check if the IR transmitter on the remote is closed (for example, with a protective film).

💡

If the console does not turn on after the update, hold the Reset button on the case for 10 seconds (the hole next to the HDMI-This will reset the settings to factory, but it won't delete user data.

7 How to Manage Xiaomi Mi TV Stick without remote control

If the standard console is lost or broken, there are several ways to control the console:

Method 1: Mi Remote Appendix (official)

• 📱 Install Mi Remote from Google Play or App Store.
• 🔍 Select the Mi device TV Stick and follow the instructions on the screen.
• 🎮 The app supports voice search and gestures.

Method 2: Bluetooth keyboard or gamepad

• 🎮 Connect the keyboard through Settings → Devices → Bluetooth.
• 🖱️ The mouse connects through USB-OTG Adapter (an additional cable is needed).

Method 3: Voice control

• 🎤 Press the microphone button on the remote (or in the Mi Remote app).
• 🗣️ Say a command, such as “Put YouTube on” or “Find an Interstellar movie".

Method 4: Remote management through ADB (advanced)

adb connect [IP- prefix address


adb shell input keyevent 3 # Home button emulation




adb shell input text "Netflix" # Text input

For this method, you need to include debugging on USB developer-setting.

FAQ: Frequent questions about Xiaomi Mi TV Stick