How to set up channels on a Xiaomi TV 32 inches: full instruction with photos and tips

Xiaomi’s Mi TV 32 series (including Mi TV 4A 32, Mi TV 4S 32 and Mi TV 5 32) are popular thanks to a combination of affordable price, high-quality screen and smart features based on Android TV. However, many users face difficulties when first setting up air channels — especially if it comes to digital television (DVB-T2) or connecting to a cable operator. In this article, we will discuss all the ways to set up channels, from automatic search to manual sorting, and also explain how to solve typical signal problems.

It is important to understand that the setup process can vary depending on the region (Russia and CIS countries use their own broadcast standards), the type of antenna (room, street, collective) and even the version of the TV firmware. We took into account all the nuances and prepared a universal manual that will suit most Xiaomi models with a diagonal of 32 inches. If your TV does not find channels or shows them with interference, at the end of the article you will find a checklist for diagnosis and problem solving.

1. Preparation of the TV for channel settings

Before you start looking for channels, make sure the TV is properly connected and ready to go.

• 📡 Connect the antenna to the connector. ANT IN It's on the back of a TV set (DVB-T2) It is recommended to use an external antenna with an amplifier, especially if you are far from the TV tower.
• ⚡ Check power: the TV must be connected to the network without the use of extension cords (they can interfere with the network).
• 🔌 Connect the operator’s cable (if you use cable TV) to the connector CABLE IN or through the prefix.
• 📶 Set up the Internet (via Wi-Fi or cable) – this is necessary to automatically determine the region and update the list of channels.

If you connect via a cable operator (such as Rostelecom, MTS or Beeline), check the settings: frequency, modulation and symbol rate from the operator. These data may be needed for manual search.

⚠️ Note: If you use satellite TV (like Tricolor or NTV-Plus), the channels are set up via an external receiver. Xiaomi TV itself does not have a built-in satellite tuner.

2. Automatic channel search on Xiaomi TV 32

This is the easiest way, and it's the most convenient way for most users, to actually identify the channels that are available and store them in memory.

1. Turn on the TV and press the Menu (or Settings) button on the remote.
2. Go to Settings → Channels → Autosetting.
3. Select the source of the signal: 📶 antenna (DVB-T/T2) — digital-only. 📺 Cable (DVB-C) — for cable television from the operator.

broadcasting

Russia

Kazakhstan

Other

Start.

Once the search is complete, the TV will save the channels found and suggest sorting them. If there are no channels found or too few, go to manually adjust (Section 3).

💡

If the TV finds channels, but they are not saved, try resetting the tuner settings: Settings → Channels → Reset tuner settings.

Manual channel search: when the machine is not working

If automatic search didn’t work, or if you want to add specific channels (like from a local operator), use manual adjustment.This method is also useful if the TV finds channels with interference – you can manually specify parameters for a more stable signal.

Instructions for manual search:

1. Go to Settings → Channels → Manual setting.
2. Select the signal type (DVB-T2 for on-air or DVB-C for cable TV).
3. Enter the parameters manually (request them from the operator or find them on the RTRS website for digital TV): 📡 Frequency (e.g., frequency, 546 MHz for 30-Go multiplex in Moscow). 🔄 Modulation (usually) 256 QAM cable-TV). 📶 Symbolrate (e.g, 6875 ks/s).

Search

If you don’t know the parameters, try searching by range: specify the initial and final frequency (for example, 470-862 MHz for DVB-T2 in Russia) and run the scan.

⚠️ Attention: In some regions of Russia, broadcasting is on non-standard frequencies. If manual search did not help, check the current data on the website of CETV.

4. IPTV setup on Xiaomi TV 32

If you use IPTV (Internet TV), Xiaomi TV supports this format without additional consoles.

1. Connect the TV to the Internet via cable or Wi-Fi.
2. Install the operator’s app (for example, MTS TV, Rostelecom Interactive TV or Wink) from the Google Play store.
3. Log in to the application using data from your tariff.

Alternatively, use the built-in Live Channels player:

1. Download the playlist in.m3u format (provided by the operator).
2. Upload the file to USB-drive and connect it to the TV.
3. Open Live Channels, select Add Source → File and specify the path to the playlist.

Important: some carriers (like Tricolor) block IPTV access on uncertified devices, in which case a console will be required.

5. Sorting, removing and editing channels

Once you search, the channels are stored in random order, and to organize them, follow these steps:

1. Go to Settings → Channels → Channel Management.
2. Select the channel you want to move and press OK on the remote.
3. Use the ↑/↓ button to move the channel in the list.
4. To remove the channel, select it and press Remove (or Red on the remote).

Make sure the antenna is connected tightly|Check the signal level (in the menu "Signal status")|Remove duplicate channels|Sort channels by numbers|Save the settings-->

6. Solving problems with channel setup

If the TV can’t find channels or they are shown with interference, use this instruction:

If the problem is not solved, try resetting the tuner settings:

Settings → Channels → Resetting tuner settings → Confirm

⚠️ Warning: Once reset, all the stored channels will be removed.

7. firmware update for better tuner performance

Sometimes the problems with channel setup are due to an outdated version of the software, and regular updates improve tuner stability and add support for new broadcast standards.

How to update firmware:

1. Go to Settings → About TV → System Update.
2. Select Check for Updates.
3. If a new version is available, click Download and Install.
4. Wait until the TV is finished (the TV will restart automatically).

If the update is not available via the Internet, download the firmware from the official Xiaomi website and install it via USB:

1. Download the firmware file (for example, mi_tv_4a_32_vXX.zip) computer.
2. Unpack the archive and copy the update.zip file to the flash drive (FAT32 format).
3. Connect the flash drive to the TV and select Settings → About TV → Update via USB.

💡

Updating your firmware can solve channel-finding problems, especially if your TV is released before 2022. DVB-T2 Russia.

Frequently Asked Questions (FAQ)