Xiaomi Mi TV P1 32: Full setup of the TV from A to Z

Xiaomi Mi TV TV P1 32 - compact but functional solution for the kitchen, bedroom or small living room. Despite its modest dimensions, the model is equipped with a modern LED-lighting, support HDR10 and built-in Android system TV 11 with voice control, but many users have difficulty setting up their first setup, from connecting to Wi-Fi to optimizing sound and image.

In this guide, we will analyze all the stages of setting up Mi TV P1 32 – from basic connectivity to subtle parameters that the manufacturer hides in the depth of the menu, you will learn how to avoid common errors (for example, loss of image quality when connecting via a mobile device). HDMI-Low-standard cable), what settings should be changed immediately after purchase, and how to integrate the TV into the Xiaomi ecosystem for managing using a smartphone.

Preparing for the first inclusion: what to do before setting up

Before connecting the Mi TV P1 32 to the network, check the completeness and operating conditions.

• 📺 The TV itself with a stand (if purchased in the kit)
• 🔌 Power cable (euro-fork, without adapter)
• 🎮 Remote remote control with batteries (2) × AAA)
• 📄 Guarantee card and brief instructions
• 🔧 Support screws for the support (if applicable)

Pay attention to the conditions of placement: the TV should not be near heat sources (for example, above the oven) or under direct sunlight. The optimal distance for viewing with a diagonal of 32 inches is 1.2-2.5 meters. If you plan to hang on the wall, check the compatibility of the bracket with VESA 100×100 connectors.

⚠️ Warning: When you first turn on, the TV can automatically update the firmware, which will take up to 20 minutes. Do not pull the power cord at this point, this will lead to a system failure and the need for manual repair through the system. USB.

Before setting up, it is recommended:

Download the Mi Remote app on your smartphone (iOS/Android)|Prepare data from Wi-Fi (network name and password)|Check availability HDMI-standard-cable 2.0 console-connect|Shut down. VPN on the router (can block updates)|Connect external devices (sound bar, game console) after setting up

-->

First Including and Selecting Language: Step-by-step Instructions

Press the power button on the remote or on the back of the TV. After downloading, the welcome screen with the Xiaomi logo will appear.

1. Select the interface language. The Russian (Russia) option is optimal for Russia, which includes localized services (for example, Wink for voice control).
2. Confirm the region. Specify “Russia” to avoid problems with geo-blocking apps (e.g. YouTube or Netflix).
3. Accept the terms of the user agreement. Here you can quickly view the main points by clicking "More details".
4. Select the type of Internet connection: 📶 Wi-Fi is convenient, but can slow down when signal is weak. 🔌 Ethernet cable is more stable for streaming video 4K.

If your TV doesn’t find your Wi-Fi network, check:

• 🔄 Restart the router (turn off power for 30 seconds).
• 📡 Make sure the network is operating in the 2.4 GHz band (5 GHz may not be supported on some firmware).
• 🔒 Turn off the filtering by MAC-addresses in router settings.

By Wi-Fi | By Ethernet | Using a mobile hotspot |I Do not connect to the network-->

Image Customization: How to Get the Perfect Picture

The factory settings of the Mi TV P1 32 are often tailored to the brightness of the display, rather than home viewing, to optimize the image:

1. Go to Settings → Display and sound → Image.
2. Choose Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Dynamic Mode High contrast and can tire your eyes.
3. Turn off the "Autolight" - the light sensor in budget models works inaccurately.
4. Manually adjust the parameters: 🎨 Contrast: 85–90% (depending on room lighting). 🌡️ Color temperature: "Warm" (less fatigues the eyes in the evening). 🔍 Sharpness: 50% (factory 100% add artifacts).

Use YouTube test videos to calibrate (e.g., search for the "TV calibration test"). Note the uniformity of the backlight: dark scenes should not have noticeable "lights" at the corners of the screen.

⚠️ Note: If the image is "soapy" or blurred after setting up, check the resolution of the signal source. HDMI Select in the settings of the TV "Resolution" HDMI» → «Auto" or manually install 1920×1080@60Hz.

💡

For game consoles (PS5, Xbox) Enable "Game" mode in the settings HDMI-This will reduce the input delay to 10-15 ms (versus 30-40 ms in standard mode).

Sound optimization: from bass to voice commands

The built-in Mi TV P1 32 speakers (2×10W) handle speech and background music, but for movies or music, you'll need external acoustics.

1. Go to Settings → Display and Sound → Sound.
2. Choose Mode "Cinema" for surround sound or "Music" for bass enhancement.
3. Activate Dolby Audio (if available) to support Dolby Digital Plus formats.
4. Set up the equaliser: 🎵 For speech: raise the slider 1-2 kHz by +3 dB. 🎶 For music: amplify 60–100 Hz (bass) and 10–12 kHz (upper frequencies).

If you connect a sound panel or receiver:

• 🔊 Use the port. HDMI ARC (it is marked on the back) for sound transmission without additional cables.
• 🔄 In the sound settings, select "Exit through" HDMI ARC».
• 🎤 For the microphone of the voice assistant (Google Assistant) enable "Speech recognition" in Settings → The device → Voice control.

Connecting external devices: consoles, consoles, flash drives

The Mi TV P1 32 is equipped with three HDMI 2.0 ports (one with ARC support), two USB 2.0, an optical output and a headphone jack.

Consoles and game consoles

• 🎮 For PS5/Xbox Series X Use a Cable HDMI 2.1 (though the port is on TV 2.0, This will provide a capacity reserve).
• 📺 Enable "Game mode" in the settings HDMI-port to reduce delay.
• 🔄 If the image flashes, turn it off. HDR In console settings, the budget model may not process metadata correctly.

Flash drives and hard drives

• 💾 The TV supports FAT32, exFAT and NTFS, but for video 4K better NTFS (There is no restriction on file size).
• 🎬 For reproduction MKV or MP4 soundly DTS You may need to install Kodi through Google Play.
• ⚡ If USB-The device is not determined, try to connect it through USB-externally powered hub – TV ports may lack power HDD.

To connect cable or satellite TV:

1. Connect the antenna cable to the RF IN connector.
2. Go to Settings → Channels → Autosetting.
3. Select Digital Channels (DVB-T2) and start your search.
4. After scanning, sort channels by numbers (the option “Order”).

💡

If the TV doesn’t find channels, check if your antenna supports DVB-T2. In some regions, an external receiver (such as the Xiaomi Mi Box S) may be required.

Customization of smart functions: voice assistant and Mi Home

The Mi TV P1 32 is integrated into the Xiaomi ecosystem, allowing you to control it via smartphone or voice.

1. Download the Mi Home app (iOS/Android) and log in with the same account as you do on your TV.
2. Add the device: "+" → "TV" → "Mi TV P1." The TV and phone must be on the same Wi-Fi network.
3. Set up voice control: 🎤 B Settings → The device → Select Google Assistant or Alice (for Russia). 🔊 To activate, say “OK, Google” or press the microphone button on the remote. 📱 In the Mi Home app, you can create scenarios such as “If the TV is on, turn off the lights” (if you have Yeelight smart bulbs).

Challenges and solutions:

• 🚫 Voice Assistant does not respond: check if the microphone is enabled in the privacy settings (Settings) → System system → Confidentiality).
• 🔄 TV doesn’t show up in Mi Home: restart both devices and update the TV’s firmware.
• 🔌 Scripts don’t work: Make sure your TV and other Xiaomi devices are tied to the same region in your account.

💡

To speed up the launch of applications, turn off the interface animation. To do this, activate the developer mode (7 taps on "Build Number") and set "Animation Scale" on "Off.".

Update firmware and reset settings

Regular firmware updates fix bugs and add new features. Check the relevance of the version in Settings → About TV → System Update. Update options:

Automatic update

• 🔄 The TV itself checks for updates when connecting to the Internet.
• ⏳ The process takes 10–30 minutes, the TV restarts automatically.
• 📶 Requires a stable connection to the network (preferably via cable).

Manual update via USB

If the automatic update does not work:

1. Download the firmware from the official Xiaomi Support website (select the Mi TV P1 32 model).
2. Unpack the archive and copy the update.zip file to the flash drive (FAT32 format).
3. Put the flash drive in. USB-TV port and go to Settings → On TV. → Update through USB.

⚠️ Warning: If the TV is stuck on the Xiaomi logo after the update, reset: press the power button on the remote and the Menu button for 10 seconds.

For a complete reset (for example, before selling):

1. Go to Settings → System → Reset.
2. Select “Erase all data”.
3. Confirm the action with a password from the Xiaomi account (if attached).

FAQ: Answers to Frequent Questions