When a Xiaomi smartphone suddenly turns off and back on without you, it can be taken by surprise at the most inopportune moment, a phenomenon often referred to as a “cyclical reboot” or bootloop, and it can turn using the device into a nightmare.
The reasons for this behavior can be found in software conflicts of the MIUI operating system, as well as in the banal sticking of buttons or overheating of the processor. Before you carry the device to the service center, you should conduct a number of diagnostic procedures yourself, in most cases, the problem can be solved without deep interference with the hardware.
In this article, we’ll take a look at all the possible scenarios why Xiaomi reboots on its own, and provide step-by-step troubleshooting instructions. From simple button checks to complex firmware manipulations, you’ll find here a complete guide to getting your phone back to life.
Hardware causes and problems with buttons
The most common but often overlooked reason for spontaneous reboots is mechanical: If the power button is triggered or permanently clamped, the phone perceives it as a command to restart the system. Dense protective cases or moisture can put pressure on the contacts, causing the device to behave chaoticly.
Carefully inspect your Redmi or Poco case for damage. Remove the case and check if the power key is running freely. Sometimes it is enough to simply clean the gap around the button with compressed air or gently wipe with alcohol (when the device is off) to eliminate sticking.
⚠️ Note: If the phone has recently fallen or been in contact with water, the problem may be oxidation of the power button plume, in which case disassembly on its own can lead to loss of warranty, so it is better to contact specialists.
Also worth checking is the battery status. Battery bloating can cause physical pressure on the board's internal components, causing circuits and sudden reboots. If the back of the smartphone starts to move away or the screen goes "wave", immediately stop using the device.
Software failures and application conflicts
Often, malfunctioning software is the culprit, installing applications from unreliable sources, using modified versions of Android, or viruses can disrupt system processes. When a background process causes a critical error, the system initiates an emergency reboot to protect data.
To identify the culprit, try to remember when the software started to get in trouble. If the phone is still turning on, go to the app menu and delete the recently installed programs, and pay special attention to memory cleaners, antiviruses, and customization applications.
Safe Mode is a great diagnostic tool, and in this mode, MIUI only loads with system applications, and if it's stable in safe mode, it's just third-party software.
- 📱 Press the off button and in the menu that appears (hold it for a long time) the "Disable" item until the suggestion appears to go to safe mode.
- 🔍 Check the phone’s performance during 10-15 minutes without third-party programs.
- 🗑️ If the reboots have stopped, delete the apps one at a time to find the conflicting ones.
Memory overflow and system cache
Lack of free space in internal storage is one of the common reasons Xiaomi starts to behave inadequately: When free memory is critically limited (less than 1-2 GB), the operating system cannot create temporary files and function normally, which leads to cyclical reboots.
Cleaning up the app cache and system debris can make things a lot better, and you shouldn't ignore the space shortage notifications, because it affects not only the speed of the system, but also the stability of the entire system. Error log files can grow to giant sizes, taking up precious megabytes.
☑️ Memory check
Use the built-in Security app or third-party file managers to analyze disk space. Note the folders of messengers like Telegram or WhatsApp, which can take up tens of gigabytes of cache.
| Type of data | Impact on the system | Recommended action |
|---|---|---|
| Cash app. | Slowdown, errors | Clean through the settings |
| Download folder | Places taken, but do not affect speed | Move to PC or Remove |
| System Logs | Critical when overflowing | Clean through the Engineering Menu |
| Multimedia. | Lack of room for updates | Use cloud storage |
Problems after MIUI update
Updating the operating system is a delicate process. If a Xiaomi phone started to restart immediately after installing a new version of MIUI, there may have been a conflict between the old settings and the new code.
In such cases, cleaning the Wipe Cache partition through Recovery mode helps, which will not delete your personal data (photos, contacts), but will reset temporary system files that may have been corrupted. If this does not help, you may need a complete reset or firmware.
What is Recovery Mode?
Make sure you download the update officially, through the settings menu.Installing custom builds or firmware from unverified sources on a stable version can lead to a bricking device or an endless cycle of reboots.
Reset to factory settings (Hard Reset)
If the software methods didn't work, the radical but effective solution is a complete reset, which will bring the phone back out of the box by removing all user data and settings, often eliminating the deep system errors that cause the bootloop.
⚠️ Warning: Before performing Hard Reset, be sure to back up all important data, as it will be impossible to restore them after reset without a pre-created copy.
To reset via the menu, go to Settings → About Phone → Reset. If the phone doesn’t turn on, use Recovery mode: Press Volume Up + Power and select Wipe Data.
💡
After resetting, don't rush to restore all applications from backup at once. First, check the clean phone for an hour. If there's no problem, install the programs gradually.
Once the procedure is complete, the phone will restart, and you will need to reset the original setup, so if the problem was a software failure, the device should work steadily.
Diagnostics of battery and charger
Unstable charging voltage can also trigger spontaneous reboots, and if the battery is worn out, it may not produce the required current at peak load times (e.g. when the camera is started), causing a shutdown.
Try replacing the cable and power supply with original or certified counterparts. Cheap chargers often give power surges, which Xiaomi perceives as a critical power error.
- 🔌 Check the charging connector for dust and pile that may interfere with contact.
- 🔋 Pay attention to the percentage of charge: if the phone turns off when 20-30%, battery-change.
- 🌡️ Watch for temperature: Overheating above 45 degrees often causes emergency shutdown.
💡
Power stability is a key factor in the smartphone, and the use of poor charging accessories is a common cause of software failures and reboots.