How many channels shows the TV Xiaomi: understand the models and regions

When you buy a Xiaomi TV, one of the first questions you have after you connect is how many channels it can show. The answer depends not only on the device model, but also on the region of use, the type of connection (antenna, cable, satellite) and even the firmware version. In this article, we will understand how to determine the maximum number of channels for your model, how to set them up correctly and what to do if the TV finds fewer channels than expected.

It is important to understand that Xiaomi does not limit the number of channels at the software level, it all depends on the hardware capabilities of the tuner and signal quality. TV 4A can support 1000 In theory, but in practice, the number of channels rarely exceeds the 200–300 Because of the limitations of operators and broadcasting in your area. QLED or Mi TV 6 supportive DVB-T2/C/S2 They can handle many more sources, including satellite packets.

If you are just planning to buy or are already faced with the problem of a lack of channels, this article will help you to understand the nuances.

• 📺 How many channels support popular Xiaomi models TV (from 4A pre-pro-series)
• 📡 How the type of connection affects the number of channels (air, cable, satellite) TV)
• ⚙️ Step-by-step setting up autosearch and manually adding channels
• ❌ What to do if the TV doesn’t find channels or shows them incorrectly

1 How many channels support different Xiaomi models TV

The number of channels that a Xiaomi TV can handle depends on the type of tuner and firmware version. The table below shows the data for popular series for 2026. Note: the numbers are for the maximum number of channels in the list, but the real number depends on your operator and region.

* ATSC It is only supported in models for North America.

** ISDB-T — for the markets of Japan and Brazil.

Important: If your model is not listed in the table, check the specifications on the official Xiaomi website or in the documentation. TV 3 or Mi TV 4 (until 2019) can only support DVB-T without T2, This limits the number of available channels in Europe and Russia.

⚠️ Note: In some regions (for example, in Moscow or St. Petersburg) broadcasting DVB-T2 It's up to 20 channels in the first multiplex and up to 10 channels in the second. If your TV finds less, the problem may be the antenna or settings, not the model constraints.

2. How the type of connection affects the number of channels

Even if you have Xiaomi. TV It supports 3,000 channels technically, and the actual number depends on the source of the signal:

• 📶 Etheric TV (DVB-T2): In Russia, there are 2 multiplexes (package) of 10-20 channels each, and the TV will show exactly as many as it broadcasts in your region.
• 📞 Cable TV (DVB-C): The number of channels depends on the operator (Rostelecom, MTS, Beeline, etc.) Usually it is 100-300 channels, but some packages include up to 500.
• 🛰️ Satellite. TV (DVB-S2): Here, the limit is determined by the operator (Tricolor, NTV-Plus, Telecard.
• 🌐 IPTV: Through applications (e.g. Mi) TV IPTV or third-party players) you can connect an unlimited number of channels, but it depends on the playlist and Internet speed.

Example: If you are connected to the Mi TV 5 Pro overhead antenna and cable TV from Rostelecom, the general list can be up to 300 channels (20 airtime channels) + The TV is physically capable of storing up to 2,000 records, but will only show those available at your rate.

💡

If you are using satellite TV, Check if your model supports Xiaomi TV DiSEqC (for switching between satellites) Without this feature, you can configure only one satellite, which will limit the choice of channels.

3. Step-by-step instruction: how to set up channel autosearch

To find all available channels Xiaomi TV, follow the following steps. MIUI TV 2023-2026.

Disable all unnecessary cables (leave only the antenna/cable)|Check your internet connection (to update your channel list)|Make sure the antenna is pointed at the tower (for airborne) TV)|Record your operator's frequencies (for manual settings)-->

1. Open the Settings (button with a gear on the remote control) → select Channels → Channel setting.
2. Select the signal source: Etheric TV (DVB-T/T2) — for antennas; cable TV (DVB-C) — for operators of the Rostelecom type; Satellite TV (DVB-S) — plate-cloth.

Press AutoSearch. If you want, enter the settings:

• For DVB-C: Specify frequency, symbolic speed and modulation (this data is provided by the provider).
• For DVB-S2: Select a satellite (e.g. Eutelsat) 36E tricolor).
• Wait until the search is finished, and the TV will save the channels that you found and suggest you sort them.

Tip: If the search engine does not find channels, try Manual Search (in the same menu). This will require accurate frequency parameters, which can be found on the operator's website or in the contract.

4.Why Xiaomi TV Finds fewer channels than expected

If you only see a portion of the channels that should be available after auto search, the reasons may be as follows:

• 📶 Weak signal: Check antenna/cable connection. TV Use a signal amplifier or directional antenna (such as Locus or Remo).
• ⚡ Incorrect search options: For cable TV It is often required to manually specify the symbolic speed (for example, 6875 for Rostelecom).
• 🔄 Outdated Firmware: In Older Versions MIUI TV You may not have up-to-date channel lists for your region.
• 🚫 Operator restrictions: Some providers encrypt channels (e.g. NTV-Plus). CAM-module.

Diagnosis: To understand what the problem is, go to Settings → Channels → Signal status. If the signal level is below 50 percent, try it:

• Reconnect the cable;
• Use a different connector on the TV (if there are several);
• Call the provider and check if there are any broadcasting failures.

⚠️ Note: If you are connected to a cable TV, But the TV only finds the air channels, make sure that the settings have the right source (DVB-C, not DVB-T2). Frequent Error – Wrong Signal Type Choice.

5. How to add channels manually (if the search engine did not work)

If the automatic search doesn't find the right channels, you can add them manually.

1. Find out the exact parameters of the channel: DVB-T2: multiplex frequency (e.g, 546 MHz for RTRS-1 For Moscow. DVB-C: frequency, symbolic speed and modulation (e.g, 314 MHz, 6875, 256 QAM).

This data can be found on the operator’s website or in directories like DVBpro.

Go to Settings → Channels → Manual search.

Select the signal type (DVB-T2, DVB-C or DVB-S2) And enter the parameters.

Click Search. If a channel is found, it will be added to the general list.

Example for Moscow (RTRC)-1):

Type: DVB-T2


Frequency: 546,000 kHz




Bandwidth: 8 MHz




Modulation: 256 QAM

If the channel is not found, check:

• Correctness of the data entered (especially the symbolic speed for the DVB-C);
• Signal availability (the signal status should be green indicator in the menu);
• Supporting the standard with your model (e.g. Mi) TV 4A supportive DVB-S2).

💡

Manual search is useful for adding separate channels, but if the TV doesn’t find any channels, the problem is most likely in the hardware (tuner, antenna input) or firmware.

6. How to sort and manage channels on Xiaomi TV

After searching, the TV stores the channels in random order, to organize them:

1. Go to Settings. → Channels → Channel management.
2. Select Change Order and drag the channels to the right place (use the Up/Down buttons on the remote).
3. To remove unnecessary channels, highlight them and click Remove.
4. For grouping (e.g., Sport, Children) click Create a group and add channels to it.

Additional functions:

• 🔒 Channel Blocking: You can set a password to certain channels in the control menu (useful for parental controls).
• 📁 Export/Import List: Some models allow you to keep a list of channels on the list of USB And download it to another Xiaomi TV.
• 🔄 Auto Update: Turn on the Auto Update Channel option to allow the TV to periodically check new channels.

If you frequently switch between different sources (e.g., ether) + IPTV), Use your favorites: press OK on the channel and select Add to your favorites, then they will be available in a separate list.

7. Frequent problems and their solutions

Let’s take a look at the typical situations faced by Xiaomi users. TV, and the way in which they are addressed.

⚠️ Warning: If after all the manipulations, the TV still can't find the channels, check if the tuner is broken, signs of malfunction: no signal on all sources, freeze when searching, errors like "No signal" in which case repair is required.

FAQ: Answers to popular questions