QR-Xiaomi code: where is on smartphones, smartwatches and other devices

You have bought a new Xiaomi device and can’t find it. QR-Or maybe you had to re-access Mi Account, but you didn't know where to look for a factory sticker? This problem is familiar to many users – especially when it comes to budget models without a box or devices with a non-standard location of identifiers.

In this article, we will examine all possible places where the manufacturer hides the product. QR-And you'll learn not only the physical location of the codes, but also how to scan them without third-party apps if the in-house scanner refuses to work. QR-code is erased or missing at all.

The material is relevant for all devices of the brand, including the latest models of 2026 (Xiaomi 14 Ultra, Redmi Note 13 Pro).+, Mi Band 8 and old gadgets like Mi A1 Mi Band 3. Separately focus on the nuances for devices without a box, bought from hand or brought from abroad.

1. Where to look. QR-code on smartphones Xiaomi, Redmi and POCO

On Xiaomi smartphones QR-There are three main places where codes are found, and each of them is responsible for different functions.

1.The factory sticker under the lid (IMEI + serial)

• 📦 Where: under the removable back cover (on the battery or inside the case) on models with a non-removable cover - under the tray for the SIM-map.
• 🔍 For what: binding to the Mi Account, warranty service, unlocking the bootloader.
• ⚠️ Nuance: on new models (Xiaomi) 13T, Redmi Note 12: The sticker may be under protective film.

2. The device box

• 📦 Where: on the bottom of the box (near the barcode) or on the inside tab.
• 🔍 Why: Initial activation of the smartphone, binding to Xiaomi Cloud services.
• ⚠️ nuance: if the box is lost, restore QR-The code can be accessed through settings → The phone. → All parameters (see section below).

3. Virtual QR-code

If the physical code is erased or missing, it can be generated directly in the smartphone:

1. Open Settings → About the phone → All the parameters.
2. Scroll down to Status block.
3. Press on. QR-Device code (on some firmware - Device Information) → QR-code).

⚠️ Note: On smartphones with custom firmware (for example, LineageOS) virtual QR-The code may not be available. In this case, use the data from the Settings → SIM-maps and networks → IMEI manually.

2. QR-codes on fitness bracelets and smart watches Xiaomi

Mi Band, Mi Watch and Xiaomi Smart Band QR-The codes are arranged differently from smartphones, and their primary purpose is to link to Mi Fitness (formerly Mi Fit) or Zepp Life.

Mi Band 3/4/5/6/7/8 and Lite versions

• 📦 Where: On the inside of the strap (under the plastic latch).
• 🔍 What: Primary synchronization with the application.
• ⚠️ Nuance: on Mi Band 8, the code can be hidden under a protective film - gently tuck it with a nail.

Mi Watch, Mi Watch Lite, Xiaomi Watch S3

• 📦 Where: on the back of the body (near the sensors).
• 🔍 What: activation of Xiaomi Wear functions, firmware update.
• ⚠️ Nuance: On the Mi Watch S1 Pro code is duplicated on the box and in documents.

Xiaomi Smart Band 7 Pro and other Pro models

These devices are often supplied with two QR-code:

1. On the box - for downloading the official application.
2. On the bracelet itself - to link to the account.

3. How to scan. QR-code on Xiaomi without third-party applications

Many users do not know that Xiaomi smartphones already have a built-in scanner QR-It's faster than most third-party applications. Here's how to use it:

Method 1: Through the camera (MIUI 12 and newer)

1. Open the standard Camera app.
2. Point the lens at QR-code.
3. Wait for the notification to Open the link or Connect the device.

Method 2: "Fast Tools"

1. Swipe down the screen to open the notification bar.
2. Touch the Scanner icon QR (If not, add it through editing).
3. Point to the code – the system automatically recognizes it.

Method 3: Through the Scanner application

On some firmware (e.g, POCO Launcher) scanner is included in a separate application:

• 🔍 Find the Scanner in the Apps menu or QR Scanner.
• 📱 Allow access to the camera.
• 🔗 Hover over the code - the link will open automatically.

💡

If the scanner does not recognize the code, try turning on the flashlight (swipe down). → flashlight icons, or wipe your smartphone camera from your fingerprints, often with poor lighting or a dirty lens.

⚠️ Attention: On smartphones with Global ROM (For example, Redmi Note 11 Global, the scanner can block clicking on some links for security reasons. URL from the notification and paste the browser manually.

4. QR-codes on other Xiaomi devices: routers, headphones, smart home

The manufacturer integrates QR-Not only do they code in smartphones and bracelets, but they also code in other gadgets:

Xiaomi routers (Mi Router) 4A/5/6, AX3600 etc.)

• 📦 Where: on the bottom of the body (near the MAC-address).
• 🔍 What: Quick setup via Mi Wi-Fi, Mesh network connection.
• ⚠️ Nuance: on Xiaomi Router AX9000 code is duplicated on the box and in the web interface (192.168.31.1).

Xiaomi headphones (Mi True Wireless, Buds 4 Pro, etc.)

• 📦 Where: On the inside of the charging case cover.
• 🔍 What: Connecting to a smartphone via Mi AIoT.
• ⚠️ Nuance: on Xiaomi Buds 5, the code can be hidden under protective film.

Smart devices (lamps, sockets, robot vacuum cleaners)

• 📦 Where: on the box or on the device itself (e.g., under the lid of the Mi Robot Vacuum).
• 🔍 What to do: Link to Mi Home or Xiaomi Home.
• ⚠️ Nuance: Xiaomi Smart Lamp code can be generated dynamically when first enabled.

Make sure the device is connected to the network (for routers/lamps)

Check your smartphone’s Wi-Fi connection (to set up a smart home)

Clean the camera of dirt and prints

Turn on sufficient brightness of the screen (if scanning from another device)-->

5. What to do if QR-code is erased or missing

The situation when QR-It's not uncommon for the code to be erased, torn or missing (e.g., on a used device). Here are 5 working ways to solve the problem:

Restore to serial number

For smartphones and bracelets:

• 📱 On a smartphone: Settings → The phone. → Serial number.
• ⌚ On the bracelet: serial on the box or under the battery cover.

Enter it manually in the app (Mi Fitness, Zepp Life or Mi Account).

2. Generate new code

For smartphones:

1. Go to Settings. → The phone. → All parameters. → QR-code.
2. If you do not have an option, upgrade to the latest version of MIUI.

3.Use IMEI

To unlock Mi Account or warranty service:

• Find out. IMEI via *#06# or in Settings → SIM-maps and networks → IMEI.
• Provide it to the support team of Xiaomi (through chat on the official website).

4. Contact support

If the code is required for guarantee:

• 📧 Write to support@mi.com photo-check.
• 📞 Call the hotline (for Russia: +7 495 644-50-55).

Alternative binding methods

For smart devices:

• 🔄 Use Bluetooth Pairing (click the button on your device) 5-10 seconds).
• 🔌 Connect through Mi Home manually, selecting the model from the list.

💡

If you bought the device with your hands, be sure to check it through the official Mi Verify service. IMEI Serial number – the system will show whether the gadget is in the black list (stolen / lost).

6. Frequent errors in working with QR-Xiaomi codes

Even experienced users sometimes face problems when scanning or using the device. QR-Here's the top of the codes.-5 Mistakes and how to avoid them:

Error 1: The scanner does not recognize the code

• 🔦 Reason: Poor lighting or dirty camera.
• 💡 Solution: Turn on the flashlight or wipe the lens.

Error 2: Code leads to a non-existent page

• 🌐 Reason: Outdated firmware of the device.
• 🔄 Solution: Update MIUI through settings → Updating the system.

Mistake 3: Account binding is not working

• 🔒 Reason: Your device is already linked to another Mi Account.
• 📱 Solution: perform reset via Settings → Accounts. → Delete the account.

Mistake 4: QR-bracelet code is not scanned

• ⌚ Reason: Code is too small or corrupted.
• 🔍 Solution: Take a magnification photo and print it out on a printer.

Error 5: The code from the box doesn't fit

• 📦 Reason: Box from another device.
• 🔎 Solution: Check the serial number on the gadget itself.

⚠️ Note: If during scanning QR-When you see the Mi Band bracelet, you get the "Device Not Supported" error, update the Zepp Life app to the latest version. Older versions (up to 6.0) are not compatible with newer models.

7 Security: Can I be Trusted? QR-codes on Xiaomi

QR-Codes make it easier to set up devices, but they can be a tool for scammers. Here are 3 security rules worth remembering:

Rule 1: Check the source

• ✅ Safe: codes on the box, the device itself or in official settings.
• ❌ Dangerous: codes sent by SMS, messengers or found on third-party sites.

Rule 2: Do not scan suspicious codes

Fraudsters can replace QR-code:

• 🔗 Phishing links (fake Mi Account login pages).
• 📥 Malignant APK-files (e.g., "firmware updates").
• 💳 Payment pages (forgeries for the official Xiaomi store).

Rule 3: Use the official annexes

Scan the codes only through:

• 📱 Built-in scanner in MIUI.
• 🔍 Official apps: Mi Home, Zepp Life, Xiaomi Wear.
• 🌐 Browser in incognito mode (for checking links).

💡

Before the scan. QR-Check it with VirusTotal, download a screenshot of the code, and the system will show if it leads to a dangerous resource.

FAQ: Answers to Frequent Questions