How to connect Xiaomi remote to your TV: 5 ways + mistake-making

Why Xiaomi remote does not connect to the TV and how to fix it

You have bought a new TV Xiaomi Mi TV Or Xiaomi Mi Remote, but it refuses to sync with the device? The problem is familiar to many users — according to statistics from service centers, 37% of calls on Xiaomi TVs are due to the setting of the remotes. from a banal discharged battery to a firmware conflict.

In this article, we will discuss all the current ways of connecting, from standard Bluetooth synchronization to manual addition through the Mi Home app, and you will also learn what to do if the remote stopped working after updating the TV firmware (relevant for models 2023-2026). Whatever, you got Mi. TV Stick, Mi Box S or Fully Smart TV — Instructions are suitable for all devices of the Xiaomi ecosystem.

Before you start setting up, check out three key points:

• 🔋 Battery level in the remote (on some models, the indicator flashes red at low charge).
• 📶 Distance between remote and TV (maximum 10 meters for Bluetooth, 5 meters for IR).
• 🔄 Rebooting the TV (sometimes helps to reset temporary synchronization errors).

Method 1: Automatic Bluetooth connection (for Mi Remote)

Most modern Xiaomi Mi Remote consoles (models) 2020 Connect to your TV via Bluetooth Low Energy (BLE). This method works out of the box for Mi TVs TV 4S/5/5X/6 and the Mi Box. S/4K. Here's how to start synchronization:

1. Turn on the TV and wait for the system to fully load (until the main screen appears).
2. Press and hold the Mi buttons. + Back (or Mi) + Home on some models) on the remote for 5 seconds until the indicator flashes blue and red.
3. On the TV, go to Settings. → Devices → Bluetooth and select Mi Remote from the list of available devices.
4. Confirm pairing on both devices (on the remote you may need to press any button).

If the TV can't see the remote, try:

• 🔄 Reboot both devices (remove the batteries from the remote for 30 seconds).
• 📱 Update the TV firmware to the latest version (relevant for Mi models) TV 5 Pro and newer).
• 🛠️ Reset Bluetooth settings on your TV in Settings → System system → Reset.

Make sure that Bluetooth is on on the TV|

The remote is in pairing mode (blinds blue)|

Distance between devices not more than 3 meters|

There's no active TV on the TV. VPN firewall-->

⚠️ Note: On Xiaomi TVs 2019 release (for example, Mi) TV 4A) You may need to manually add the remote control through the code. If the automatic synchronization doesn't work, go to Method 3.

Method 2: Connecting an IR panel (for Mi) IR Remote)

Old models of Xiaomi Mi remotes IR Remote (for example, for Mi Box 3 or Mi) TV 3S) They use an infrared port. There's no pairing here -- the remote just sends out commands that the TV needs to recognize. If the buttons don't work, follow these steps:

1. Make sure there are no obstacles between the remote and the TV’s IR receiver (glass, mirrors, or direct sunlight can block the signal).
2. Press and hold the Menu buttons. + OK at the same time for 8 seconds, until the indicator flashes red.
3. Point the remote to the TV and press any button (e.g. Power) if the TV responds, the setup is complete.

If there is no reaction, try manually entering the code:

1. On the remote, press Menu. + 1 and hold on for 3 seconds.
2. Enter the code for your TV model (list below) and click OK.

Method 3: Manually add the remote via Mi Home

If standard methods didn’t work, try connecting the remote via the official Mi Home app.This is true for Xiaomi smart TVs integrated into the Mi Smart Home ecosystem.

1. Install the Mi Home app on your smartphone (available for Android and iOS).
2. Sign in with the same Mi Account as you do on your TV.
3. Go to the Devices section → Add the device → Televisions and projectors.
4. Choose your TV model and follow the instructions on the screen.
5. When the system suggests connecting the remote, click Add manually and select Mi Remote Controller.

After successful addition, check the remote. If the Mi Home displays a "Device not responding" error, try:

• 🔄 Reconnect TV to Wi-Fi (sometimes network problems block synchronization).
• 📱 Update the Mi Home app to the latest version.
• 🔧 Reset the remote settings (click Mi) + Back + Power for 10 seconds).

💡

If the TV is not displayed in Mi Home, check if the Smart Home feature is enabled in the TV settings (Settings) → Account and security → Mi Smart Home).

Method 4: Connecting a universal remote to Xiaomi TV

Use a universal remote from another manufacturer (such as Huayu or One For All)? TV You'll need to enter a special code. Most of the universal remotes support Xiaomi TVs under the brand name "Mi". TV" or Xiaomi".

Algorithm of action:

1. Turn on the TV and put the remote into programming mode (usually the Setup or Code Search button is held).
2. Enter one of the codes for Xiaomi (see table below).
3. Press Power – if the TV is turned off, the code fits.
4. Save the settings (on some remotes you need to press this). OK store).

If none of the code works, try automatic search:

1. Hold the Setup to double-flicker indicator.
2. Point the remote to the TV and press Power every 2 seconds.
3. When the TV turns off, press it. OK code-saving.

💡

Universal remotes often do not support voice control and the Mi button (Challenging Xiaomi menu).

Method 5: Connecting through USB-receiver (for older models)

Some Xiaomi remotes (e.g. Mi Box 1st generation or Mi) TV (2) require connection through USB-This little adapter is inserted into the port. USB on the TV and provides communication with the remote over radio frequency (RF).

How to set up:

1. Connect. USB-TV receiver (port should be available) USB 2.0).
2. Insert the batteries in the remote and press any button - the indicator on the receiver should blink.
3. On the TV, go to Settings. → Devices → Accessories and select Add Remote.
4. Follow the instructions on the screen (you may need to enter) PIN-code, usually 0000 or 1234).

If the remote is not detected:

• 🔌 Try another one. USB-port (some TVs turn off power ports in sleep mode).
• 🔄 Reboot the TV with a connected receiver.
• 🛠️ Update the receiver firmware via Mi Home (if available).

⚠️ Attention: USB-receivers are sensitive to electromagnetic interference. Don't place them near routers, microwaves or wireless charging.

Solving common problems

Even after a successful connection, the remote can malfunction.-5 problems and solutions:

1. The remote is connected, but not all buttons work

Possible causes:

• 🔄 Firmware conflict (relevant after TV update) Solution: Reset the remote to factory settings (Mi) + Back + Power for 10 seconds).
• 📋 Mi Home: Change the region to China (even if you are in Russia).
• 🛠️ Damage to battery contacts. Solution: Clean the contacts with alcohol and put the batteries tightly in.

2. the remote is disconnected after 5-10 minutes of inactivity

This is a standard power saving function.

1. Go to Settings → Devices → Bluetooth.
2. Select your remote and turn off the "Switch off" option.
3. Alternatively, in Mi Home, in the remote settings, deactivate "Timeout Dream."

3.The TV does not respond to voice commands

XiaoAI voice assistant works only when the following conditions are met:

• 📶 Internet connection (voice commands are processed by Xiaomi cloud).
• 🎤 The microphone on the remote is not silenced (check the physical switch).
• 🌐 The region of the Mi Account is set to China or Global.

4.The remote only works near the TV

A weak Bluetooth or IR signal can be caused by:

• 🔋 Batteries discharged (even if the indicator is green).
• 📡 Interference from other devices (routers, wireless headphones).
• 🔧 Failure of the antenna in the remote (relevant after falls).

Solution: Try connecting the remote via Mi Home in "Close Communication" mode" (NFC), If your model supports this function.

5.The remote stopped working after the firmware update

This is a well-known problem for Xiaomi TVs on firmware 2023-2026 (version 3.0.+). Provisional decision:

1. Reverse the TV firmware to the previous version via Settings → On TV. → Updating the system → Recoil.
2. Or connect the remote via Mi Home in manual mode (see Method 3).
3. Contact Xiaomi with the TV model and firmware version (you can find it in Settings) → On TV).

FAQ: Frequent questions about connecting Xiaomi remote