Modern. LED-TVs from Xiaomi deservedly popular due to the excellent price-quality ratio, as well as the advanced Android system. TV. Model Mi TV 4S 43 is one of the most common options in the mid-segment, offering 4K-However, new owners often have questions about the first launch, especially given the specifics of the control and the lack of familiar physical buttons on some versions.
The process of activating a device may seem unobvious if you have previously used other brands, and in this guide, we will go through all the steps from connecting the power to setting up the operating system, and also pay attention to the typical problems when the screen remains black or the device goes into sleep mode instead of fully turning on.
You don't need any complicated equipment or expertise to get off the ground, but you just need to follow the algorithm of actions described below, and we'll look at both standard procedures and forced launch methods that will help if the standard methods don't work.
Preparation for the first launch and inspection of the completeness
Before you press the power button, you need to make sure that all components are connected correctly. The power supply of the Xiaomi Mi TV 4S is sensitive to voltage drops, so it is recommended to use a serviceable socket with grounding. Avoid using cheap extension cords or low-quality network filters that can cause unstable electronics.
Take a close look at the back of the device. Find a connector to connect the power cable and make sure that the plug is plugged in to the stop. In some cases, the density of the connector can be high, which requires little effort. Also check for a remote control, since this model does not have physical control buttons on the case, and the remote is the only way to interact with the interface.
If you use external devices, such as game consoles or satellite receivers, don’t connect them to the device until you have access to it. HDMI-The initial setup should be done with a clean connection to the power grid, which will allow the system to correctly determine the configuration and avoid driver conflicts at start-up.
⚠️ Warning: Do not connect the TV to the network if you notice damage to the power cable or fork. Using faulty equipment can short-circuit and the motherboard will fail.
Location of controls and activation of power
A key feature of the Mi TV 4S series is its minimalist design, where manufacturers have tried to hide all the technical elements. The on button on the front panel is often missing, which confuses users. The main receiver of the infrared or Bluetooth remote signal is located at the bottom of the screen, usually in the center or with a slight shift towards the logo.
To turn on the TV, you need to point the remote to the bottom bezels and press the power button. On the remote, it is usually indicated by the red color or the circle symbol with a vertical line. If the indicator on the front panel (often hidden under the logo or located at the bottom) lights up in red, then the device is in standby mode and ready to start.
In some remote revisions, the power button can be combined with the menu call function or have a dual purpose. If a single press fails, try holding the button for 2-3 seconds. Android TV can respond to long presses as a deep awakening command.
Primary configuration of the Android TV operating system
Once successfully enabled, you will see the Mi logo, followed by the operating system boot. The first screen will prompt you to select the interface language. Use the navigation buttons on the remote to navigate through the list. It is recommended to immediately choose Russian for comfortable use of all the functions of the smart TV.
The next step is to connect to a Wi-Fi or local area network via cable. LAN. For stable operation of streaming services and watching videos in 4K-It is advisable to use 5 GHz if your router supports this standard. Enter the password from your network using the on-screen keyboard.
It will suggest you sign in to your Google account, which is a must-see for accessing the Google Play Store and syncing data, so if you already have an account, just enter your login and password, otherwise you can create a new profile directly from your TV or later through your computer or smartphone.
☑️ Primary TV setup
Working with the remote control Mi Remote
The remote, which comes with the Xiaomi Mi TV 4S 43, can work in two modes: infrared (IR) and Bluetooth. IR mode allows you to control basic functions (volume, on) without pairing, but for full operation of voice search and navigation in the menu, a Bluetooth connection is necessary.
To pair, hold the remote close to the TV (up to 20 cm) and simultaneously press two buttons: Home (house icon) and Back (arrow icon). The screen should show a message about a successful connection. If this does not happen, check the batteries - Bluetooth requires a high-quality charge.
Importantly, the volume and on buttons on the Bluetooth unit can emulate IR signals to control external devices (soundbars or receivers) if the appropriate profiles are configured.
💡
If the remote stops responding, try to remove the batteries for 10 seconds and then insert them back in.This performs a complete reset of the remote controller.
Problem Solving: The TV doesn’t turn on or goes off
When the light is on but the screen is black, it may indicate a software failure, in which case a forced reboot helps. Turn off the TV completely by pulling out the power cord. Leave the device off for 2-3 minutes to discharge the residual currents in the capacitors.
Once you're on, try to start the system again. If the problem persists, it may be that the external device conflicts. USB-drives, hard drives and HDMI-If the TV turns on normally, the problem lies in one of the connected gadgets.
Sometimes it's a memory overload or an update failure, which may require a factory reset, and if the menu isn't available, you can try a button combination on the remote when the TV is off (press the power button and the confirmation button), but this method doesn't work on all versions of the firmware.
⚠️ Warning: Do not try to disassemble the TV case to search for the reset button on the board if the device is warranty.
Hidden functions of the engineering menu
Status indicators table and their value
Understanding the signals that the TV is sending helps to diagnose the problem more quickly, and the indicator, located on the bottom edge, changes the color and blinking mode depending on the state of the system.
| Status of the indicator | Meaning | User action |
|---|---|---|
| Burning red. | Standby mode (Standby) | Press the switch on the remote |
| Blinks red. | Getting a command or making a mistake | Check the remote or reboot the TV |
| Burning white. | The TV is on and running. | Normal work. |
| Blinks white | Update or download is in progress | Do not turn off the power outlet |
| It's not burning. | No power or malfunction | Check the cable and the socket |
Customize the image and sound after turning on
After successful launch, it is recommended to immediately adjust the image settings. Go to Settings → Image. For the 4S 43 LED-backlit model, it is important to adjust the black level and brightness correctly to avoid lighting at the edges of the screen.
Choose the image mode that matches your content. Movie or Movie mode is best for viewing movies, which provides the most accurate color reproduction, Standard or Standard mode is suitable for television, and Bright for demonstration purposes in stores.
In the audio section, you can activate virtual surround sound Dolby Audio. If you plan to use external acoustics, switch the output to the optical output or Bluetooth column in the appropriate settings menu.
💡
Properly calibrating the image immediately after purchase prolongs the service life LED-Matrix and reduces the load on the eyes during prolonged viewing.