How to Launch Xiaomi Redmi: A Complete Guide to First Including

Buying a new smartphone is always an exciting moment, especially when it comes to popular Xiaomi Redmi models. However, immediately after unpacking, many users are faced with the question of how to start the device correctly to avoid the typical errors in the initial setup of the system. Unlike simple button phones, modern Android smartphones require a series of preparatory steps before first use.

The process of initial launch of Redmi can vary depending on the version of the MIUI operating system or the new HyperOS, which is now actively implemented by the manufacturer.Incorrect actions during the welcome stage can lead to locking the device or problems with the account in the future.

In this article, we will take a look at each step, from physical fitness to logging into your personal profile, which steps are critical to the security of your data, and the right start is the key to a long and smooth operation of your new smartphone.

Preparation of the device for first activation

Before trying to run Xiaomi Redmi, you need to conduct basic physical training of the device. Modern smartphones often come with a minimum battery charge, so the first thing you should do is connect the original charger to the network and to the USB Type-C or Micro-USB port of your device.

If the charger is not included, use a certified power supply with a current of at least 2 Amps. Using cheap analogues can lead to slow charging or even damage to the motherboard's power controller. While the phone is charging, you can remove the tray for the battery. SIM-card with a special clip or a thin needle.

• 📱 Make sure that SIM-The card is set correctly, contacts down, and is the same size as the tray (Nano-SIM).
• 🔋 Leave your phone on charge at least for 15-20 minutes before first switching on if the battery indicator does not respond.
• 💾 If you plan to use a MicroSD memory card, insert it into the appropriate slot before powering on.

It is important to check the integrity of the screen and the case for chips or cracks that may appear during transportation. defects, you should not start the device - it is better to immediately contact the store. After the phone was lying on charging, you can proceed to activation.

⚠️ Warning: Do not try to turn on the phone if it has just been brought from the cold into a warm room. Condensation inside the case may cause a short circuit. 30-40 minute.

Including process and choice of interface language

To start the Xiaomi Redmi, you need to find the power button. Most Redmi models have it on the right side of the line. Activation requires a short press (about 2-3 seconds) before the Mi or Redmi logo appears on the screen. If the device does not respond, press the button for 10-15 seconds to force the reboot.

Once the logo is loaded, the system will start preparing components, which can take anywhere from 30 seconds to a few minutes. The first screen you will see will be the language selection menu. This is a critical step, since changing the language later may require rebooting some system services.

Some global firmware versions may not display a language selection screen immediately, but after selecting a region, in which case the country of residence is indicated first, then the language. MIUI interface is adapted for different regions, so choosing the right location is important for the correct operation of watches, weather and news widgets.

💡

If the screen is too dim or too bright, try adjusting the brightness with volume buttons at this stage - in some firmware versions this works before reaching the desktop.

The system may then suggest connecting to a Wi-Fi network. Although this step can be skipped, it is strongly recommended to do so immediately, and an Internet connection is necessary to check the relevance of system updates and activation of some Google services.

Network connection and system update

Modern Xiaomi smartphones often come with an operating system that is already installed, but not the latest. Immediately after choosing a language and connecting to Wi-Fi, the device may suggest updating MIUI or HyperOS. This is an important step that should not be ignored, as new patches contain security vulnerabilities fixes and improve power consumption.

The upgrade process can take anywhere from 10 minutes to an hour, depending on the version that was installed in the factory and the current version. During the upgrade, the phone may reboot several times. Do not interrupt this process or turn off the device, even if it seems to be hanging.

• 📶 A stable Wi-Fi connection is critical to downloading large service packs (often more often than not). 2-3 GB).
• 🔒 Updates close security holes through which hackers could access data.
• ⚙️ New firmware versions often add features that weren’t there when the smartphone came out of the box.

If the automatic update hasn't started, you can manually run it through the settings menu, and after the initial setup, you need to go to Settings → About the phone and click on the system version, but most often the system itself insists on updating when you first start.

⚠️ Note: Do not install third-party firmware or modified versions of Android on your first run unless you are an experienced user.This may result in loss of warranty and unstable banking applications.

Setting up a Mi and Google account

The Xiaomi ecosystem is tied to the use of two main accounts: Mi Account and Google Account. Mi Account is necessary for the operation of branded services: cloud storage, device search, synchronization of contacts and themes. Google account is mandatory for access to the Play Market app store, YouTube and synchronization with other Android devices.

When you first start up, it will suggest you sign in to an existing Mi Account or create a new one. If you already had a Xiaomi phone, the easiest way to type in your details is if you're a newcomer, it will take a couple of minutes to sign up. It's important to remember your password or link your phone number to restore access, because resetting your Mi Account password can be a complicated process.

Once logged in, the system will offer to restore data from the old device. Xiaomi provides a convenient migration tool that allows you to transfer contacts, photos, apps and even place icons from an old Android or iPhone, a process that greatly accelerates the addiction to the new gadget.

Permissions, passwords and biometrics

Data security is a priority for Xiaomi Redmi. During the initial setup phase, you will be asked to set the screen unlock method. PIN-6-digit code or complex password, and that's the code that's going to be asked for when you first boot your phone and when you reset your settings.

Then the system will suggest setting up biometric protection, depending on the Redmi model, it can be a fingerprint scanner (in the on button or under the screen) or unlocking in the face. The fingerprint scanner works faster and more reliable, especially in poor lighting, when the unlock camera in the face may be mistaken.

Also at this stage, Google Pay (or Google Wallet) is set up for contactless payment.You will need to accept the terms of use and possibly set up a customization. PIN-You can then add a credit card, and you can notice that you're working. NFC-Payment screen must be unlocked.

• 👆 The fingerprint scanner in the power button allows you to unlock the phone without changing the grip of the device.
• 📸 Unlocking the face is convenient but less secure than a fingerprint.
• 🔐 Remember your digital password, as biometrics cannot be used immediately after a reboot.

At the end of the setup, the system will request permissions to access various functions for pre-installed applications. Read carefully what you allow. For example, the recorder does not need access to contacts, and the calculator does not need to access geolocation. Minimizing access rights increases the overall security of the device.

⚠️ Note: If you lose the digital unlock password, you can only reset it with a full Hard Reset, which will delete all data from your phone.

💡

The digital screen unlock password is the main key to your data: write it down in a secure location other than the phone itself.

Completion of customization and basic optimization

After all the steps, the customizator will suggest you go to the desktop. However, the work on launching Xiaomi Redmi is not yet finished. It is recommended to perform several actions to optimize the system. First of all, check for updates for all preinstalled applications through Play Market and GetApps.

Then go to the screen settings and set a comfortable refresh rate (if the model supports 90 Hz or 120 Hz) and brightness. Also in the Settings → Battery section, you can configure power saving modes. By default, there is a "Balanced" mode that suits most users.

Remember to remove junk, so-called bloatware. There's not much in the global versions, but there can be a lot of redundant applications in Chinese or Indian firmware. You can delete them or just hide them so they don't get in the way. To do this, press the app icon and select "Delete."

Now your smartphone is fully ready to go, you can install games, customize desktops, widgets, and personalize your device, and running it right will keep the system running smoothly for months to come.

💡

Go to the display settings and turn on the “Vision Protection” or “Read Mode” function to reduce eye strain when using your phone in the evening.

Possible problems during the first launch

Sometimes the process of first launching Xiaomi Redmi can go wrong. The most common problem is that the phone turns on, shows the logo and turns off again (cyclical reboot).This can indicate a deep battery drain or a firmware failure, in which case leave the phone charging for a few hours, not turning it on.

Another common issue is the lack of a network signal or the inability to make a call. SIM-The card is active and not blocked PIN-Also check if the correct network type is selected in the settings (Settings) → SIM-maps and mobile networks → Type of network).