Owning a modern smartphone like the Xiaomi 13T involves not only actively using its capabilities, but also competent management of the device’s state. Periodic restart or complete shutdown of the gadget is necessary to reset accumulated system errors, free RAM and install updates. Many users who have switched from other brands or older models may face difficulties due to the changed logic of the buttons or the lack of physical shutdown when the battery is discharged.
The process of deactivating Android in the shell of HyperOS or MIUI has its own features that are important for every owner to know. Wrong actions can lead to an accidental call for emergency services or transition to recovery mode, which will require additional knowledge to exit. In this article, we will discuss in detail all existing methods of correctly disconnecting power from your device.
Consider both the routine menu procedures and the forced reboot methods that will save you if the interface freezes. Understanding these mechanisms will help extend the life of the smartphone hardware and keep your data intact. Let's start with the simplest and most common method.
Standard shutdown via the interface menu
The safest and most recommended way to complete the work is to use the regular menu of the system. Unlike the old models, which required long-term retention of the power button, in modern versions of the Xiaomi 13T, the logic of operation has been changed to prevent accidental calls. Now a brief tap activates the voice assistant, and a combination of actions is required to access power management.
To turn off your smartphone, you need to simultaneously press the power button and the volume button (either up or down). Hold them for 1-2 seconds until the options menu appears on the screen. This is standard practice for most modern Android devices, providing a balance between convenience and protection from accidental pressing in your pocket.
Once the menu appears on the display, you'll see several options, each of which performs a function. Select an icon that says "Stop" (usually a red circle with a vertical line). PIN-unlock code if this security feature has been activated in the settings.
⚠️ Warning: Don't confuse the off button with the screen lock function. A brief press on the power button only extinguishes the display, leaving the processes in the background active.
If you want to change the behavior of the buttons so that you only press the power button for a long time, you can configure this. Go to Settings, then select Additional and find Buttons, where you can activate the "Stop with a long press of the power button", returning the classic control.
Using the Quick Settings Panel
An alternative and very convenient way to manage power is the quick settings panel, accessible through the notification curtain. This method is especially useful if the side buttons of the smartphone are damaged, stuck or difficult to use at the moment. Xiaomi 13T interface allows you to bring power management to the main control screen.
To access this method, swipe from top to bottom across the screen to open the control center. In the upper or lower right corner (depending on the theme and the version of the shell), you will find a power icon. Pressing it will trigger the same menu as the physical button combination, allowing you to choose the off or reboot mode.
If the power icon is not on the visible part of the panel, you can add it manually. Click on the edit icon (usually a pencil or three dots in the corner of the panel), find the Power button in the list of available widgets and drag it to the active zone. This will provide quick access to the shutdown function in any situation without having to look for physical keys.
- 📱 Swipe from top to bottom to open the control center.
- ⚡ Find the power icon in the array of widgets.
- 🛑 Click "Switch off" to complete the system.
The use of software shutdown methods is preferable in standard situations, as it allows the operating system to correctly complete all background processes and save the state of applications. This minimizes the risk of damage to the file system and logical errors in the operation of the operating system after turning on.
Forced reset when getting stuck
Situations where the touch screen stops responding to touch and the interface freezes completely occur even on powerful flagships like the Xiaomi 13T. In such cases, standard methods of shutting down through the menu become unavailable, and the only solution is a hardware reset, often called “hard reset” buttons or forced reboot.
To perform this procedure, you need to press the power button and hold it continuously for 10-15 seconds. In some cases, you may need to simultaneously press the power button and the volume button. The screen will be black at this point, but after a specified period of time, the device must vibrate and show the MI or Xiaomi logo, signaling the start of the boot.
Pressure Power + Vol Up (10-15 seconds) before vibrationThis method simulates battery extraction, which was typical of older smartphones, bypasses software locks on the interface and sends a signal directly to the power controller, and it's important to understand that data is not deleted, but unsaved changes in open documents can be lost.
⚠️ Note: Do not use the forced reboot method regularly. Frequent system interruption without normal process completion can lead to fragmentation of files and malfunctions in applications.
If after 20 seconds of holding the buttons, there is no reaction, try connecting the device to the charger and repeat the procedure. Sometimes a deep discharge or protective mechanisms of the power controller block the on-set until the battery is minimally charged.
☑️ Actions when getting stuck
Automatic shutdown and turn on on schedule
One useful feature that is often overlooked is the ability to set up automatic shutdowns and turn on your smartphone on schedule, a feature that is especially relevant for those who want to keep the phone rested at night, or for automatically restarting the device to clean the cache and optimize work.
To set up, go to the Settings menu, select the Battery section, and then look for Scheduled Tasks (or "Planner"). Here you can activate the Power On and Power Off options by setting the desired time. The smartphone will perform these actions on its own at the specified hours, even if it is in sleep mode.
Regular automatic reboots, such as once a week at 3 a.m., help keep RAM clean and prevent system debris from accumulating, especially useful for users who rarely turn off their devices manually and keep them on standby for months.
| Parameter | Description | Recommendation |
|---|---|---|
| Frequency | How often do you do | 1 time per week |
| Time. | Hour of implementation | At night (03:00 - 05:00) |
| Action. | Type of operation | Reboot. |
| Alarm clock | Impact on alarm clocks | Don't turn it off. |
Impact on alarm clocks
Recovery and Fastboot: When the phone doesn’t turn off
Sometimes users find themselves in a situation where the smartphone instead of turning off goes into special service modes, such as Recovery or Fastboot. This can happen when accidentally pressing a combination of buttons during on or when trying to turn off a device with a damaged file system.
Recovery Mode is a text menu in English, often with an orange or black background. To exit it and turn off your phone, use the volume buttons for navigation and the power button for confirmation. Select Reboot, then Reboot to system or Power off.
Fastboot mode is characterized by a hare repairing an android, or the Fastboot logo. To exit this mode, just press the power button and hold it for about 15 seconds until the screen goes out and the device starts normal booting. This is not a breakdown, but only a diagnostic mode.
- 🔧 Recovery - menu for resetting and firmware.
- 🐰 Fastboot – Low-level access mode.
- 🔄 Exit - output and normal boot system.
Getting into these modes often scares inexperienced users, but in fact, these are the security mechanisms of the Xiaomi 13T. Knowing how to get out of them is equivalent to the ability to properly turn off the device in an unusual situation.
Solving the power button problems
If the physical power button is damaged, fuses, or no longer responds, it becomes problematic to turn off the Xiaomi 13T, and in such cases software crutches and built-in accessibility features come to the rescue that allow you to emulate button pressing or control power through the screen.
One solution is to use Universal Keys or Special Menu, and if you activate a virtual button on the screen, you can either set it to Lock the Screen or call the power menu with a long press, which is a temporary solution that allows you to get to the service center.
You can also use the Google Assistant voice assistant, and by saying "Switch off your phone" (or similar in your language), you can initiate the shutdown process if the system recognizes the command, but this method requires an active Internet connection and configured voice control.
⚠️ Warning: If the power button is physically damaged (cracked, fell in), do not try to turn off the phone by completely discharging the battery.
As a last resort, wait until the battery reaches a critical level and the device shuts down on its own, but immediately after that, put it on charge to avoid a deep discharge, which can lead to the impossibility of further battery operation.
💡
If the power button works once, try to gently clean its perimeter with a soft toothbrush - sometimes dust blocks the movement of the mechanism.
Frequently Asked Questions (FAQ)
Can I turn off the Xiaomi 13T with a voice command?
What if the screen is black and the phone doesn’t respond to the buttons?
Is it harmful to turn off your smartphone completely often?
Why does the phone ask for a password when it is turned off?
💡
Properly turning off the smartphone is not just the screen quenching, but the completion of all system processes that prolong the life of the device.