Modern gadgets based on the Android operating system, including Xiaomi devices, Redmi and POCO, They're designed to be in continuous use, but there are situations where the device needs to be completely de-energized. SIM-Maps, software failures, or simply to save battery life on a long journey. Users switching from button phones or other brands often find that the usual algorithm of actions does not work.
Owners of new models may not find the usual power button in a standard place, as manufacturers experiment with the location of controls and software MIUI or HyperOS. In addition, there is a difference between turning off the screen, going to sleep and completely shutting down the system. Understanding these differences is critical for the proper operation of the mobile device. In this guide, we will discuss all possible options for completion, from standard methods to emergency.
If your smartphone has stopped responding to touch, the standard menu may not be available. Forced reboot techniques that simulate battery extraction are used in such cases. It is important to do these actions carefully so as not to damage the file system. Below are detailed instructions for the various use cases of your gadget.
Staff shutdown through the settings menu
The safest and most appropriate way to complete any electronic device is to use a software menu. In MIUI and HyperOS shells, this process is standardized, but can vary in visual design depending on the Android version. To perform the operation, unlock the screen and find the Settings icon, which usually looks like a gear.
Once you log in, you have to scroll through the menu to the end, and you have the phone About or Advanced Settings, depending on the firmware version. However, in most current versions of the interface, the power button is displayed on a separate menu or is available through a swipe. Find the section that is responsible for completing the work and confirm the action by clicking on the corresponding icon.
💡
If you can’t find the shutdown button, try using Google Assistant or Xiao AI by saying “Switch off your phone.”
Some users prefer to use the quick access bar. Swipe from top to bottom to open the notification curtain. Power management icons are often located in the upper right corner. Clicking on the red symbol allows you not only to turn off the device, but also to choose the reboot or flight mode. This method is especially convenient when the screen is partially locked or the sensor is interrupted.
- 🔋 Standard shutdown saves all data and closes the background processes correctly.
- ⚙️ The settings menu is available even with a partial lock interface.
- 🔄 Rebooting through the menu often resolves minor software errors without losing data.
- 📱 On tablets, the off menu can be in the section "Special features".
Use of physical power buttons
The classic method that is familiar to every smartphone owner is to use a side button. On most Xiaomi and Redmi models, the power button is located on the right side of the case. To permanently turn off, you need to perform a long press, holding the button for 2-3 seconds.
This is complicated in models where the power button is paired with a fingerprint scanner or integrated into the case. In such devices, a short press can wake the screen, and a long press can cause the switch menu. If a single press does not work, try a button combination. On many devices with Android 11 and above, simultaneously pressing the power button and the volume button causes the control menu.
It is important to distinguish between short and long presses. A short click usually locks the screen, a medium click calls the voice assistant (if configured), and a long one (more than 5 seconds) forcefully restarts the device. Beware: if you hold the button too long, the phone may go into recovery mode, which will require additional actions to return to the system.
⚠️ Warning: Do not hold the power button for longer 10-15 seconds unnecessarily, as it causes a hard reset that can damage open files.
What to do if the screen does not respond
The most difficult situation is when the device display is out, but the system is still working, or vice versa, the screen is lit, but does not respond to touch. In this case, the standard methods through the Settings menu will not help. The only solution is hardware reboot, which requires you to press the power button and hold it for 10-15 seconds.
If the single button combination doesn't work, use a bunch of buttons. Press the power button and the volume button (or zoom in, depending on the model) at the same time. Hold them until you feel a slight vibration or see the Mi or Redmi logo on the black screen, which is a signal that the power cycle has been interrupted and the device starts to boot again.
☑️ Actions when getting stuck
There is also a method of battery discharge, which is considered "popular" but less efficient. If the buttons don't work, you can leave the device on until the battery is completely discharged. However, modern lithium polymer batteries are not recommended to be reduced to deep discharge often, as this reduces their lifespan. Use this method only as a last resort when other methods are not available.
- 🆘 Forced reboot does not delete personal data, photos or contacts.
- 🔌 Connecting a charger sometimes helps to “revive” the power controller.
- ❄️ If the phone overheats, let it cool before trying to turn it on.
- 🔧 If the buttons are physically broken, repairs will be required at the service center.
Recovery and Fastboot Modes
Xiaomi users have special download modes that are used for deep diagnostics and flashing, which can only be accessed when the phone is turned off, using keyboard combinations. Recovery mode allows you to reset to factory settings or clear the cache, which often solves problems with cyclic reboot.
To log into the Recovery menu, you usually need to turn off your phone and then press the power button and the volume button at the same time. Hold them until the logo appears. In the menu that appears, the navigation is done with the volume buttons (up-down), and the choice of item is made with the power button. Be careful: the wrong actions in this menu can lead to the deletion of all data.
What is the difference between Fastboot and Recovery?
Fastboot mode is more commonly used by developers or when restoring the system after a failed upgrade, and in this mode, a hare is shown fixing an android, exiting these modes by simply pressing the power button long enough (about 10-15 seconds) until the device vibrates and starts normal booting.
Automatic shutdown on schedule
The MIUI shell offers a convenient automatic power management feature. You can set the phone to turn off and on at a given time, useful for saving charge at night or for ensuring the alarm clock works uninterrupted (although modern smartphones wake up even when it is off).
To set up this feature, go to Settings, then select Battery or Advanced Settings. Find Scheduled On and Off. Here you can activate the function, set the turn off time and on time, and select the days of the week, so you can automate the process and not worry about manual control.
| Parameter | Description | Recommended value |
|---|---|---|
| Time off | The moment the phone goes out | 23:00 |
| Time of inclusion | Time of alarm clock setting | 07:00 |
| Repeat. | Days of the week to be completed | Every day. |
| Sound. | Melody when on | By default. |
Using a timetable helps to extend the life of the battery, as the device does not use energy for background processes at night. However, it is worth considering that at the time of turning off the phone will not be able to receive calls and messages. Make sure that the function "Do not disturb" does not override important notifications if you decide not to turn off the phone completely.
Frequent problems and their solutions
Sometimes users are faced with a situation where the phone does not turn off using standard methods. The screen may go out, but the device remains hot, or the power button does not respond. Often the cause lies in a dead system process or application conflict, in which case the safe mode that boots the system without third-party programs helps.
To enter Safe Mode, you need to press the off button on the menu, then press the "off" icon on the screen for a long time. You will be asked to go to Safe Mode. If this does not help, and the phone does not respond to the buttons for more than 20 seconds, it may be a hardware problem. Discharge the battery to zero and put on charging for 30 minutes, then try to turn it on again.
⚠️ Warning: If the phone is warm and not turned off, remove SIM-card and memory card, as a faulty drive can block the system from shutting down.
In rare cases, flashing the device is required. If software failures are repeated regularly, refer to official documentation Xiaomi or an authorized service center. Do not attempt to open the case yourself, especially if the device is warranty, as this will lead to the loss of warranty obligations.
💡
If none of the software methods help turn the device off, the only safe option is to completely discharge the battery.