Owners of popular electric vehicles often face a situation where standard methods of controlling the device seem not obvious enough. The question of how to correctly and safely terminate the device may seem trivial, but there are some peculiarities in the Xiaomi lineup. Incorrect shutdown or ignoring certain procedures can lead to battery discharge in downtime or software failures of the controller.
In this article, we will take a closer look at all the existing ways to disable various models, including the classic M365, Pro, 1S and Pro 2 versions. You will learn about hidden features, the nuances of working through a mobile application and methods to deal with common problems when the device continues to consume power even when it is turned off.
Understanding the logic of the power management system will help to extend the battery life and avoid unpleasant surprises on the next trip, and we will consider both standard scenarios and methods of forced reboot or complete shutdown for long-term storage.
Disconnection through a physical button
The most obvious and common way to stop an electric vehicle is to use the main power button. On most Xiaomi models, it is located on a platform or steering rack and is round-shaped. To permanently shut down, you need to do one short press, after which the characteristic sound signal is heard, and the indicators go out.
However, it is important to distinguish between modes of operation: a short press puts the device into sleep mode or turns it off, whereas a long hold (about 2-3 seconds) is often used to turn on. If you press the button once and the indicators are turned off, then the power controller has gone into standby mode.
Some users confuse shutdown with locking. Pressing a button while driving or immediately after stopping can activate the wheel lock, but do not necessarily turn off the system completely. Always check the status of the lights: if at least one LED is on, the system is energized.
- 🔘 One short press – turn off or go to sleep mode.
- 🔋 Long press (2-3 sec - device activation.
- ⚡ Blinking indicators - a signal to switch to energy saving mode.
In the Pro 2 and 1S series, the logic of the button has remained the same, but more intelligent backlight control has been added, and once the backlight is turned off, it can go out not instantly, but with a delay of several seconds, which is normal for a visual alert system.
💡
If the indicators continue to burn brightly for more than 10 seconds after pressing the button, check if any process is running in the background, such as a firmware update.
Management via Mi Home and Ninebot
Xiaomi’s modern gadgets are closely integrated with the smart home ecosystem, and power management is not only possible mechanically.Mi Home or Ninebot (for some regions) provides advanced access to power settings. Through the smartphone interface, you can not only track the charge, but also forcefully complete active sessions.
The menu often features a forced shutdown or reboot option, which is especially useful if the touch interface on the device is unresponsive or the power button is stuck. The menu is navigated through Settings → About device → Reboot. This method allows you to reset the errors on the onboard computer without physical intervention.
You can also set up an automatic timer shutdown or when certain conditions are met, although Xiaomi’s regular functionality limits such scenarios, and the software’s main function here is to monitor status and program reset if the physical button doesn’t work properly.
Using a Bluetooth connection to manage power requires that the device be within range of the network. If the connection is lost, software shutdown will become impossible, and you will have to resort to physical buttons. This is an important aspect of data security and access control.
Features of switching off different models (M365, Pro, 1S, Pro 2)
Despite the similarities, the different scooters have different logics for the controller. The classic M365 is known for its simplicity: there is a button, it works. However, newer versions, such as the Pro 2, have additional protection systems that can prevent instant shutdowns at high battery or engine temperature.
The 1S has a redesigned display system, where the shutdown is accompanied by a specific animation on the display that indicates the successful completion of all background processes. If you interrupt this animation by abruptly turning off the power, you may need to recalibrate the gyroscope at the next start.
The Pro version (first generation) has a more capacious battery, and the power management system (BMS) can keep the communication channels open longer after pressing the telemetry button on the server, so in this model the delay between pressing the button and completely canceling the indicators can be slightly greater than in the base version.
| Model | Type of button | Feature of shutdown | Indication |
|---|---|---|---|
| Xiaomi M365 | Mechanical | Instant response | 4 LEDs |
| Xiaomi Pro | Mechanical | BMS delay | Digital display |
| Xiaomi 1S | Mechanical + Touch | Animation of the shutdown | OLED screen |
| Xiaomi Pro 2 | Mechanical | Temperature check | OLED screen |
Understanding these differences helps avoid panic when the device’s behavior seems out of the ordinary, and in each case, the shutdown algorithm is optimized for a particular hardware configuration.
The problem of spontaneous on and off-setting
One of the most common problems owners face is when the device is turned off but after a while turns on itself or continues to discharge.This is often due to the sensitivity of the accelerometer. If the scooter is standing on a vibrating surface or it is accidentally touched, the system can interpret this as the beginning of movement and activate the readiness mode.
Another reason is firmware malfunctions, where malfunctioning code can keep the controller from going to deep sleep, and in these cases, a full recharge cycle helps: discharging the device to zero, then charging it to 100% without interruption, which allows the BMS memory cells to be reprogrammed.
Why does the scooter turn on in the backpack?
It's also worth checking the settings in the app. Some versions of the software have a "Device Search" feature that periodically activates the Bluetooth module and the audio signal, preventing the system from falling asleep completely. → Safety solves the problem of excessive energy consumption.
- 📉 Sensitive accelerometer responds to floor vibration.
- 🔧 Software failure of the firmware does not allow the controller to sleep.
- 🔌 Mechanical pressing of a button in a bag or a case.
If none of these methods work, it may be the power button itself that closes the contacts inside the enclosure, which requires disassembling and cleaning the contact group or replacing the component.
Full de-energization for long-term storage
If you plan to not use electric vehicles for a long time, like in winter, just turning off the button will not be enough. Lithium polymer batteries have a natural self-discharge current, and electronics consume minimal energy to maintain the balancing of cells. Within a few months, the battery can go into deep discharge, leading to irreversible damage.
For safe storage, it is recommended to completely disconnect the battery from the controller. In most Xiaomi models, access to the power connector is under the decorative cover on the platform or requires partial disassembly of the bottom. Unconnecting the white connector with red and black wires guarantees zero consumption.
⚠️ Warning: Before turning off the battery, make sure the device is off.Unlocking the circuit under load can cause sparking and damage to the controller's contacts.
Store the battery disconnected at 60-70% charge. Do not leave the battery fully charged or completely discharged for a long time. The optimal storage temperature is from +10 to +20 degrees Celsius. Compliance with these rules will prolong the life of your Xiaomi for several years.
☑️ Preparation for winter storage
What to do if the scooter does not turn off
It's rare for a device to freeze and not respond to a button, but it requires a knowledge of the algorithm. First, try a hard reboot. Most models need to simultaneously press the power button and the brake button (or the light button, depending on the model) for 10-15 seconds.
If the software methods don't work, you just have to physically shut down, and as mentioned earlier, it's done through a connector inside the case, but if you're not sure about your abilities, you better go to the service center, because a careless autopsy can disrupt the water protection and give you no warranty.
A common cause of sticking is contamination of button contacts with moisture or dirt. Water hitting the power button is a common problem when riding in puddles, in which case drying the device with a hair dryer (warm, non-hot air) and treating contacts with alcohol after disassembly helps.
💡
If the scooter does not turn off and warms, immediately turn off the battery physically to avoid fire or failure of the electronics.