How to insert it correctly SIM-Map to Xiaomi phone: instructions for all models

Installation SIM-While the cards in Xiaomi’s smartphone seem like a simple procedure, in practice users face typical mistakes, from the wrong location of the chip to damage to the tray, especially for beginners who are holding a device with a hybrid slot or a custom locking mechanism for the first time. This article will help you avoid common problems and get the procedure done the first time – even if you have a model with an unusual slot location (for example, Xiaomi 13 Ultra or the other one). POCO F5).

We will analyze not only the standard cases, but also the nuances: what to do if the tray is not pushed out, how to do without a paper clip, what kind of paper clips SIM-Maps are supported in modern Xiaomi (including eSIM and nano)-SIM). Special attention will be paid to models with a double slot, where you can combine two SIM-card SIM + All instructions are accompanied by up-to-date schemes and advice from service engineers.

Preparation: What you will need before installation SIM-map

Before you start the installation, make sure you have everything you need. Most problems are caused by inappropriate tools or improperly cropped tools. SIM-Here's the checklist:

• 📱 Xiaomi Smartphone (any model – from Redmi Note 12 to Mi 14 Pro)
• 🪨 Paperclip or special key (company with phone, but often lost)
• 🪪 SIM-Nano-SIM card (99% of modern Xiaomi does not support micro-SIM or standard SIM) SIM)
• 🔍 Good lighting (so as not to damage the contacts or tray mechanism)

If you're old. SIM-The card (mini-SIM or micro-SIM) will have to be trimmed or replaced in the operator's cabin. 12.3 × 8.8 If the card is larger, it won't enter the tray or get stuck. Also note that some models (e.g. Xiaomi) 12S Ultra) supports eSIM, but activation will require a separate setting in the phone menu.

Make sure your phone is turned off (but not necessarily recommended)|Use the original paper clip from the set|Check the size SIM-Cards (must be nano-SIM)|Check the tray for damage-->

If you are planning to use two SIM-card SIM + In hybrid slots (for example, in Redmi Note 11) when installing a microSD, the second slot for the microSD is determined in advance. SIM More information on compatibility is provided in the table below.

Where is the slot for SIM-maps in Xiaomi

The slot's location depends on the smartphone model, and in most cases it's on the top or side of the face, but there are exceptions.

• 📱 Xiaomi 13/14 series, Mi 11 — slot.
• 📱 Redmi Note 10/11/12, POCO X5 — left-hander.
• 📱 Xiaomi Civi, Mi Mix 4 – slot on the lower end (rare, but found).
• 📱 Xiaomi Black Shark (Game Smartphones) – The slot can be hidden under a magnetic lid.

To avoid looking for a slot at random, look for a small hole next to it, which is a clip socket. If there is no hole (as in the Xiaomi Mi Mix 3 with a retractable module), then the slot opens manually - pull on a special ledge.

If you are not sure about the slot location, look at the phone box – there is usually a diagram there. or use the official guide on the Xiaomi website (enter the model in the search section “Support”).

On the top end.|Left end.|On the bottom end.|I don't know.-->

Step-by-step instruction: how to insert SIM-map

Now, to the process itself, the instructions are universal for most models, but we'll give you some nuances for specific devices, and the important thing is, if the phone is on, it's better to turn it off before you install it, so that you don't have to short circuit if you accidentally get moisture or metal particles.

1. Find the slot (see previous section) and take a paper clip (or a special key from the set).If there is no paper clip, you can use a thin needle or an unbended stationery brace.
2. Insert the paperclip into the hole next to the slot and press with force. The tray should move 2-3 mm - do not pull it by force, otherwise you will break the mechanism. If the tray does not come out, check if it jammed (see the section "What to do if the tray is stuck").
3. Take out the tray completely and place it on a flat surface, and notice the grooves and the marks, which show which side to insert. SIM-Usually the chip should be downwards, and the bevelled corner of the card coincides with the bevelled corner of the tray.
4. Install. SIM-If you have a hybrid tray, decide which is more important: the second one. SIM For example, in the Redmi Note 12, the second slot is given priority. SIM (slot 2), if it is occupied by a memory card, the first SIM will work in the mode 4G, And the second one is just 2G.
5. Put the tray back in before you click. Make sure it sits straight -- if there's a gap, it's a straight line, SIM-card installed incorrectly.
6. Turn on your phone and check if there's no signal, restart the device or check if the card is inserted correctly.

For models with a retractable mechanism (for example, Xiaomi Mi Mix 3), the process is different:

1. Find the ledge on the lower end and pull it down.
2. Lift the lid to open the slot.
3. Install. SIM-groove-down).
4. Close the lid before you click.

💡

If the tray is tightly entering, do not press on it - check if it is skewed. SIM-Sometimes it helps to sway the tray from side to side when you install it.

What to do if the tray is for SIM-The card is stuck or not put out

One of the most common problems is a jammed tray, and the reasons can be different, from dust to factory defects.

• 🔧 Check the paper clip, it should be straight and thin enough. If you use a needle, make sure it doesn't bend when you press it.
• 🕳️ Examine the hole - sometimes it gets clogged with dirt. Carefully clean it with a toothpick (not a metal object!).
• 🔄 Try to push harder, but not with fanaticism. The tray mechanism is designed to force up to 2-3 kg - if you don't give in, don't break.
• 🛠️ Use alternative methods: Stick tape to the tray and pull. Put a plastic card on the tray (if there is a gap). Contact the service center if nothing helps.

⚠️ Note: Do not use metal objects (knives, scissors) to remove the tray - they can damage the contacts or body. If the tray breaks, it will cost 500-1500 rubles to replace it in the service (depending on the model).

If the tray is pushed out, but not fixed in the closed state, check:

• Do you have a slack (often after the phone drops)?
• Did the dirt get in the grooves?
• Whether or not it's established SIM-map of the curve (it can block the mechanism).

Features of installation SIM-Maps in popular Xiaomi models

Some Xiaomi smartphones have unique nuances when installed SIM-Let's look at the most common models.

Xiaomi 13/14 series and flagships

In these models, the slot is located on the top end, and the tray has a double lock - it must be inserted before the characteristic double click.

1. Go to Settings. → SIM-maps and mobile networks → Add eSIM.
2. Scan it. QR-code from the operator or enter data manually.

Redmi Note 10/11/12 and budget models

There is a common problem with a hybrid slot: if you install a memory card, the second SIM will stop working in 4G mode. The solution is to use the first SIM for the Internet, and the second (in slot 2) - only for calls. Also in these models, the tray sometimes "sticks" due to moisture - if the phone has been damp, dry the slot with a hair dryer (cold air!).

POCO F3/F4/F5 and gaming smartphones

V POCO The tray is often tight due to the increased protection against dust. To facilitate the extraction, you can slightly heat the body with a hair dryer (not higher than 50).°C, that's going to expand the plastic, and these models also support Dual. 5G, but only if both SIM-Cards are installed in the main slots (without microSD).

Xiaomi Black Shark (Game Phones)

These devices can have a slot hidden under a magnetic cover, and to open it, pull the ledge at the bottom of the phone, and be careful, the lid is attached to magnets, and if you drop it, you can damage the contacts.

💡

In flagship models (for example, Xiaomi 14 Ultra) priority is given to the first slot for SIM – if you are interested in high-speed Internet, install the main card in slot 1.

How to activate SIM-map

After installation SIM-The phone must automatically identify the card and connect to the network. If that does not happen, follow the following steps:

1. Restart your phone – sometimes the system won’t recognize a new SIM without a reboot.
2. Check your network settings: Go to Settings → SIM-maps and mobile networks. SIM-The card is on (the slider must be active). Select the network type - for 4G/5G set up LTE/5G (recommended).
3. Update your operator profile: In the same menu, click on your name SIM-Select Update Profile (if option is available).

Check IMEI, if the phone can't see SIM, the communication module may be damaged. You can find IMEI by command *#06#. If the number is Null or Unknown, contact the service.

If SIM-The map is not defined, but IMEI OK, try it:

• 🔄 Insert it into another phone – if it doesn’t work there, too, the operator has a problem.
• 📞 Call the operator and request a second activation.
• 🔧 Clear the cache of the communication module: Settings → Annexes → All applications → Phone. → Warehouse → Clear the cache.

⚠️ Attention: If after installation SIM-The phone stopped seeing the network, but the message is displayed in the settings "SIM-The card is not supported, perhaps your model is locked for a specific operator (for example, some Redmi are sold in connection with MTS or Beeline.

Frequent Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes when installing SIM-Here are the most common ones and how to prevent them:

Another common problem is the loss of SIM-If the contacts are erased, the card may not be recognized, and if the replacement will help SIM (free in the operator's cabin).

If you change often SIM-If you are traveling abroad, consider using eSIM, it will eliminate the need to physically remove the tray. However, not all Xiaomi models support this feature (see the table in the section "Where is the slot located").

FAQ: Answers to Frequent Questions