Xiaomi’s modern smart TVs are often perceived by users as devices that do not require complex manipulations when they first start up. Indeed, in most cases, it is enough to simply power the device and it will start working. However, new owners often face situations where the screen remains black, the indicator is on and the image does not appear, or the remote control refuses to respond to commands.
In this article, we will discuss in detail all possible scenarios for activating Xiaomi Mi TV and Redmi TV. We will consider not only the standard procedure, but also ways to solve common problems such as system freeze, a broken remote or errors in the initial setup of the Android TV operating system.
Understanding the physical features of your model is key to successful launches: Different generations of TVs can have different controls, which sometimes confuses even experienced users of this brand's gadgets.
Physical Connection and Search for Power Button
The first and most obvious step is to connect the power supply or network cable to the electrical outlet, make sure that the outlet is working properly by checking it with another electrical appliance, and if the indicator on the bottom of the TV lights up in red or orange, it means that the device is in Standby mode and ready to turn on.
The most common problem for new users is finding the power button. Unlike older kinescope models, where the button was huge and noticeable, modern day models are very popular. LED-Xiaomi panels are often devoid of protruding controls.The button can be hidden, recessed in the case or replaced with touch controls.
- 📍 Rear panel: Inspect the bottom of the back cover, often the button is there, sometimes it is combined with the control joystick.
- 🖱️ Under the logo: Some models have the button hidden directly under the Mi or Redmi logo on the front, requiring easy pressing.
- 🎮 Joystick: Instead of a separate button, a multifunction joystick can be used, which you need to press down or hold down.
⚠️ Warning: Don't put too much effort into finding a button.If you don't feel the click mechanism, maybe your model is only controlled via a remote or touchpad.
If you find a joystick button, try pressing it once briefly. In some firmware, a short press changes the signal source, and it requires a long retention for 3-5 seconds to turn on, which is standard practice to prevent accidental activation of the device.
Use of remote control
The main interface interface tool for Android TV is the remote control (DPC). Complete with Xiaomi TVs, two types of remotes are usually supplied: classic infrared (IR) or modern Bluetooth remote with voice control. The methods of activating them may differ.
To get started, you need to remove the protective film from the batteries or install new batteries if they have not been installed by the manufacturer. Note the polarity of the battery installation, since even a minimal skewed contacts can lead to a lack of reaction of the device.
If you have a Bluetooth remote, just pressing the power button may not turn on the TV if the pairing is not already done.
- Press the power button on the TV itself (as described in the previous section).
- Wait for the Mi logo to appear on the screen.
- Press and hold the OK and Back buttons (or the special combination specified in the instructions) at the same time.
For IR panels, it is enough to point the front of the remote towards the TV receiver (usually a darkened window at the bottom of the frame) and press the switch on. Infrared signal does not require pairing, but needs line of sight.
💡
If the remote has stopped responding, try removing smartphones and Wi-Fi routers from the front of the TV – they can interfere with the Bluetooth signal.
Initial setup of Android TV system
Once you're successful, you'll have the initial configuration interface, which is a critical step, because that's where all the system components are configured, and the welcome screen will tell you to choose a language, region, and Wi-Fi.
Use the navigation buttons on the remote to navigate the menu. Android Operating System TV It requires an internet connection to activate Google services and check for updates. If you have an Android or iOS smartphone, you can speed things up dramatically by using the quick setup feature. QR-code.
| The adjustment phase | User action | Importance |
|---|---|---|
| Choosing a language | Pressing OK button in the desired language | Tall. |
| Wi-Fi connection | Entering a password from the home network | Critical |
| Update of the PO | Consent to install a new version | Recommended |
| Google account | Entering or profiling | Tall. |
The system may suggest that you update the software immediately after you connect to the network. Interrupting the firmware update process on the first run can cause software failure and inability to boot the system.
☑️ Checklist of the first setup
Control via smartphone and voice commands
Modern smart home ecosystems allow you to turn on your TV without using a physical remote. If your remote is lost or defective, you can use your smartphone. This requires that the phone and TV are on the same local network (although it can be difficult to turn on the TV completely if the TV is turned off).
However, if the TV is in sleep mode, the Google Home app or the official Mi Home app can send a wake-up signal, which only works if the remote control function has been activated before, and for new devices, this method is relevant after the initial setup.
Voice control via Google Assistant or Alexa also allows you to turn on the TV with the command "Hey Google, turn on TV." To work this feature, the TV must be connected to a smart speaker or have a built-in microphone that is activated by voice command.
⚠️ Attention: Voice activation only works in deep sleep, but not if the TV is completely de-energized by pulling the cord from the socket.
Some models support control via the IR port of the smartphone (if you have one in your phone, for example, the older Xiaomi models), in which case the phone turns into a universal remote, and you can turn on the TV by simply selecting the model from the list in the Mi Remote app.
Diagnosis: The TV is not turned on
When a Xiaomi TV doesn't respond to the power button, there are a variety of reasons: Initial diagnosis begins with a status indicator behavior analysis. If the indicator doesn't burn at all, the problem is likely to be in the power chain or cable.
Check the integrity of the network cable and its density to the connector on the back. Try to turn the TV on to another outlet, preferably without using network filters and extension cords to rule out their malfunction. It is also worth checking the power supply (if it is external) for heat or foreign smell.
If the light flashes or is lit red, but the screen is black:
- ⚡ Power surge: Built-in protection could block the launch. 10-15 minutes, then try to turn it on again.
- 📺 Backlight malfunction: If you see a dim image on the screen in the bright light of the flashlight, then the matrix is working, but burned out LED-lighting.
- 🔄 Software failure: The system may have been stuck in the boot cycle. Try resetting via the Recovery menu (if available) or flashing it.
How to do Hard Reset without a menu?
Frequent startup problems and their solution
Users often experience the TV turning on, displaying the Mi TV logo, and then the screen goes out or an error message appears, which may indicate damage to system files or a conflict of connected devices.
Try to disable all external devices: USB-accumulator, HDMI-If the TV starts normally, the problem is one of the peripherals, plug them in one by one to find the culprit.
Another common problem is "black screen with sound." There's sound, the menu switches, but there's no image. This is often solved by resetting the image settings to factory values in the Settings menu. → Display. → If the menu is not available, a complete system reset will help.
💡
In 80% of cases, the problem of the “black screen” is solved by completely disconnecting the TV from the power grid for 10 minutes to relieve static voltage from the board.