The integration of Apple’s ecosystem with Android TV or MIUI TV devices is often a question for users accustomed to Cupertino’s insularity. However, modern Xiaomi and Redmi TVs come with powerful software that makes it easy to stream content with iOS. You don’t need to be a tech to establish a wireless connection, as most methods are implemented natively.
There are several proven ways to transmit images, from the built-in AirPlay feature to using third-party bridge apps. The choice of the specific method depends on your TV model and the version of the MIUI TV operating system. In some cases, standard protocols may not work stable due to router settings, but we will look at solutions for any scenario.
In this article, we will discuss the algorithms for different versions of firmware, the nuances of working on 5 GHz and 2.4 GHz networks, and provide solutions for common connection errors. Proper configuration will ensure minimal latency and high quality of the picture when watching videos or showing presentations.
Technical requirements and network preparation
Before you start setting up, make sure that both your smartphone and your TV are connected to the same Wi-Fi network, a fundamental requirement for both DLNA and AirPlay. If your router supports frequency separation, try to connect your devices to the same frequency, preferably 5GHz, to ensure high bandwidth.
Check the software's relevance on Xiaomi TV. The outdated version of MIUI TV may not contain the necessary drivers for AirPlay 2 to run smoothly. Go to the settings menu, select About System and click System Update. If new data packets are available, be sure to install them before you start pairing.
⚠️ Note: If you have a dual-band router with the same network names (SSID) For 2.4 and 5 GHz, the iPhone can automatically switch between the two, causing the connection to break.
Also worth paying attention to is router power saving settings: Some models automatically turn off infrequently used ports or reduce traffic priority for certain types of devices. MAC-Make sure the function is AP Isolation is disabled because it prevents devices within the LAN from seeing each other.
☑️ Checking connection readiness
Use of the built-in AirPlay 2 function
Modern models of Xiaomi and Redmi TVs, running on Android TV or updated MIUI for TV, often have built-in support for AirPlay 2 technology. This is the most reliable way, which does not require additional software.
On the remote, click the app menu button or go to settings. Find a item that could be called AirPlay, Wireless, or Apple AirPlay. Once activated, the TV will go to standby mode and display the code or device name that you can search.
On iPhone, open Control Point. On Face ID models, this is done by swiping down from the top right corner, on Home models, swiping up from the bottom. Click Screen Repeat icon (two rectangles). On the list of available devices, select your Xiaomi TV.
💡
To reduce latency when playing games or show slides, use a wired Ethernet connection for your TV if the model supports the LAN-port, leaving Wi-Fi only for iPhone.
If the connection is successful, a confirmation request may appear on the TV screen. Enter the 4-digit code displayed on the TV in the field on the smartphone screen. After that, the image from iOS is fully copied to the large screen. To stop the broadcast, open Control Point again and click "Stop Repeating".
Configure the Miracast protocol and Wireless Display
In cases where native AirPlay is not supported or does not work correctly, you can use the universal Miracast protocol. On Xiaomi devices, this feature is often hidden in the depths of the menu or requires inclusion through special agent applications preinstalled in the system.
On your TV, go to the app section and find a program called "Wireless Display," "Miracast," or "Translation." Run it. The screen will display a connection wait interface that will indicate the name of the device you want to select on your iPhone. Note that the standard iOS interface does not always see Miracast directly without AirPlay emulation.
Successful pairing may require a third-party intermediary app on the TV itself that emulates Apple's protocol. The Google Play store on the TV has apps like AirScreen or AirPin that create a virtual tunnel for Miracast and AirPlay.
| Parameter | AirPlay 2 | Miracast / Wireless Display | Third-party annexes |
|---|---|---|---|
| Stability | Tall. | Medium | Depends on the software. |
| Delay. | Minimum | Medium | Tall. |
| Quality. | HD / 4K | Up to 1080p. | compression |
| Difficulty | Low. | Medium | Tall. |
Using Miracast often gives you better compatibility with Windows PCs, but with iPhones, you need extra steps. Make sure your Wi-Fi Direct security settings on your TV don't prohibit new connections. Some MIUI firmware requires manual permission for each new device.
Application of third-party translation applications
When built-in methods fail, specialized applications come to the rescue, with leaders in this niche being AirScreen, ApowerMirror, and LetsView, which are installed on a Xiaomi TV through the Google Play Store, making it a full-fledged receiver for Apple devices.
After installing an application, such as AirScreen, launch it and press the Start button. The program automatically determines the network settings and creates an access point for receiving the signal. On the iPhone, a new device with the prefix specified in the application (for example, AS-Xiaomi-TV) will appear at the Control Point.
⚠️ Warning: Free versions of translation apps often contain ads that can overlap an image or interrupt a video stream every time. 15-20 For continued use, consider buying a premium version.
The LetsView app is notable for being free and supporting scanning. QR-Run the app on your TV, select the option "Scan" QR-code, point your iPhone camera to your TV screen and confirm the connection, which is convenient because it doesn't require you to enter passwords or manually search for devices in the Wi-Fi list.
When streaming video in high resolution 4K, you can see the interface of the Android TV system slowing down. Close background applications on the TV through the menu of running tasks to free up RAM.
Why is broadcasting through apps lagging?
Broadcasting content from specific applications
Special attention should be paid to the built-in broadcast function inside the applications themselves, such as YouTube, Netflix or VK Video, in which case the phone is used only as a remote control, and the video stream is downloaded by the TV directly from the Internet, which saves the battery of the iPhone and reduces the load on the Wi-Fi channel.
To activate, open the video in the app and find the Chromecast icon (the rectangle with waves in the corner). Click on it and select your Xiaomi TV from the list. If the TV doesn't show, make sure the app has access to the local network in iOS privacy settings.
Some Russian services may not see a TV due to lack of Google Cast certification in specific TV models or regional restrictions, in which case the Screen Mirroring (whole-screen broadcast) described in the previous sections helps, although the quality may be slightly lower than with nativecast broadcasting.
When you watch a video through the app's built-in player, the picture quality automatically adapts to the speed of the Internet. If you use a mirror display, the quality is limited by the speed of data transfer between the phone and the router, as well as the power of the smartphone's processor.
💡
Broadcasting through the “Cast” button inside the application is always better and more stable than the full mirror display of the iPhone screen.
Solving problems and eliminating mistakes
The most common problem is that the TV can't see the iPhone, and 90 percent of the time, it's done by rebooting the router and clearing the network cache on both devices, go to your iPhone's Wi-Fi settings, select your network, and click "Forget this network," and then reconnect by entering your password.
Another reason could be the activated Private Wi-Fi Address mode on the iPhone. MAC-The address of the device, which may block connection to some smart TVs. Try disabling this option for your home network in the Wi-Fi settings on your iPhone.
If there is an image but no sound, check the audio output settings. Sometimes the sound stays on the phone even if the picture is on TV. At Control, click on the music control icon and select the TV as the AirPlay Audio output device.