How to Turn on Xiaomi TV TV: 5 ways to do this + fixing

Xiaomi Mi TVs TV Xiaomi TV A has become popular thanks to a combination of modern technology and affordable prices, but even with such devices, users sometimes face basic difficulties – for example, they can not turn on the TV after buying, updating the firmware or losing the remote. This article will help you understand all the nuances of launching Xiaomi smart TVs, including alternative methods and solving typical problems.

Many people mistakenly think that Xiaomi should be included. TV You can only use the original remote, and the manufacturer actually has a few backup options, from a mechanical button to a smartphone, and if the TV doesn't respond to commands, it doesn't always mean that you're in a breakdown, because you're often at fault for your power settings or your firmware conflict. Next, we will analyze each method in detail, as well as give tips for diagnosing malfunctions.

Unlike traditional TVs, Xiaomi models (e.g. Mi) TV 4S, Mi TV Q1 Xiaomi TV A Pro) equipped with Android operating system TV Google TV, So, for example, after a software update, the device can automatically go into power saving mode, which will not respond to the power button.

1. Standard button activation on the remote

The most obvious way is to use the original Xiaomi Mi Remote (or compatible universal), but even here there are nuances that many people are unaware of.

To turn on the TV in the standard method:

1. Make sure the remote is within range of the IR transmitter (usually up to 8 meters at an angle of 30).°).
2. Press and hold the Power button for 1-2 seconds.
3. Wait 10-15 seconds for Android to run. TV complete.

If the TV doesn't respond:

• 🔋 Check the batteries in the remote (even new cells can be discharged after storage).
• 📶 Make sure there are no obstacles in front of the TV’s IR receiver (glass, mirrors, direct sunlight can block the signal).
• 🔄 Reboot the remote: Remove the batteries for 30 seconds, then insert back.

⚠️ Note: On some models (e.g. Mi) TV Q2 75′′ the Power button can only work after pressing Home or OK. This is due to the features of PatchWall firmware.

If the remote is lost or broken, don't rush to buy a new one. In the following sections, we'll tell you how to do without it.

2. Enacting by mechanical button on the body

All Xiaomi TVs are equipped with a physical power button that duplicates the remote function, and its location depends on the model:

Instructions for use:

1. Find the button on the case (use a flashlight if necessary).
2. For mechanical button: press once (short press on/off).
3. Touch and hold for 3-5 seconds until the Mi logo appears.
4. For joystick: Click on the center (like on the remote) or hold up/down to navigate the menu.

If the button doesn't work:

• 🧹 Clean it from dust (use a dry brush or compressed air balloon).
• 🔌 Check if the TV is connected to the outlet (the power indicator should be red or white).
• 🔧 On models with a joystick, try to gently press on it from different sides - sometimes the contacts are oxidized.

3. Powering without remote: control from a smartphone

If the remote is lost or not working, turn on Xiaomi TV You can use the Mi Remote app (for Android) or Google Home (for Android) iOS/Android). This method only works if the TV is already connected to the same Wi-Fi network as the smartphone.

Instructions for Mi Remote:

1. Download the Mi Remote app (official, from Xiaomi).
2. Open the app and select Add Device → TV → Xiaomi.
3. Follow the instructions on the screen to pair (entry may be required) PIN-TV-code).
4. After connecting, click on the virtual Power button in the app.

Instructions for Google Home:

1. Install Google Home.
2. Add the TV to the app (it should appear in the list of devices if connected to the same network).
3. Click on the TV card and select Turn on.

If the TV is not displayed in the app:

• 🔄 Restart your router (sometimes) DHCP-server does not issue IP TV).
• 📡 Check that the TV and smartphone are connected to the same network (not the guest network!).
• 🔧 Reset the network settings on the TV: press the power button on the case for 10 seconds (before restarting).

💡

If the TV doesn’t respond to Mi Remote, try manually adding it as an Android device. TV" instead of "Xiaomi" - this sometimes helps in firmware conflicts.

4. Including after a firmware update or failure

After Automatic or Manual Update Xiaomi TV It can be stuck on the Mi logo or not at all, because it's something that's PatchWall or Google's firmware. TV, That's what you do:

If the TV is hanging on the logo:

1. Turn off the TV from the socket for 1 minute (full power reset).
2. Turn it back on and hold the power button on the case for 15-20 seconds until the reboot begins.
3. If the freeze is repeated, reset to factory settings: Settings → The device → Reset → Full reset (use the joystick on the case for navigation).

If the TV is not turned on after the update:

• 🔌 Check the power supply: on models of Mi TV 4S and Q1 It is built-in, but can burn up when voltage surges.
• 🖥️ Connect the TV to the PC via USB-C (If there is a port, check if it is defined as a device. ADB.
• 📥 If the firmware is gone, you will need to reflash the TV through USB-storage device (instructions in the next section).

⚠️ Attention: On Xiaomi models TV A2 2023 or later after the unsuccessful update, emergency mode can trigger (red indicator flashes 3 times). In this case, you need to download the firmware for your model from the official Xiaomi Support website and install it manually.

5. Inclusion through USB (escape)

If the TV is not turned on due to damaged firmware, it can be reanimated with the help of USB-This is a method that's suitable for Android models. TV 9.0 and newer (e.g. Mi) TV Q2, Xiaomi TV A Pro).

Step-by-step:

1. Download the official firmware for your model from the Xiaomi Support website (Firmware section).
2. Unpack the archive and copy the file update.zip root-catalogue USB-storage device (format) FAT32).
3. Disconnect the TV from the network, insert the flash drive into the USB 2.0 port (usually marked as Service).
4. Press the power button on the case and, without letting go, connect the power cable.
5. Hold the button for 10-15 seconds until the installation starts (progress bar appears).

Important nuances:

• 📁 The firmware file should be named exactly. update.zip (numerically or postfixed).
• 🖥️ USB-The storage device must be formatted in FAT32 (not NTFS exFAT).
• ⚡ Do not turn off the TV during installation – this can lead to complete loss of performance.

On Xiaomi models TV 2022-2026 (e.g, A2, Q2 Pro) a special service cable is required for emergency firmware USB-A to USB-A, which connects to the port on the back with the inscription SERVICE.

💡

If the TV can't see USB-try another port or flash drive with a capacity of no more than 32 GB. Some Xiaomi models do not support drives with high data transfer rates (USB 3.0+).

Diagnostics of inclusion problems

If none of the methods worked, the problem could be hardware.

Checking the power supply:

• 🔌 Connect the TV to another outlet (exclude wiring problems).
• 💡 Look at the power indicator: Red is the standby TV (normal). White/blue is the download or update. Flashes red is the power supply or motherboard error. Doesn't burn, no power (check cable and socket).

Checking the motherboard:

• 🔊 Listen to the sounds: if after pressing the power button, a click of the relay is heard, but the screen does not turn on - the problem is in the backlight or inverter.
• 🖥️ Connect to the TV external monitor through HDMI-ARC — If there is an image, the matrix or plume is faulty.
• 🔧 On the Mi models TV P1 and later, when hardware failures may appear error code on the screen (for example, E01 — nutritionist, E03 — memory).

If you suspect a hardware breakdown, don’t try to disassemble the TV yourself, which may result in a loss of warranty. Contact Xiaomi’s service center or an authorized partner.

7. Frequent mistakes and how to avoid them

Many problems with Xiaomi inclusion TV It's caused by the user's wrong actions. Here are the most common mistakes:

Also, many users forget that Xiaomi TVs have an "Eco-mode" feature that can automatically turn off the device after prolonged inactivity.

1. Go to Settings. → Energy conservation.
2. Turn off the Auto-Disconnection and Eco-Mode options.
3. Set Standby Mode to Quick Start.

💡

If the TV spontaneously turns off, check the settings of the sleep timer: → System system → Sleep timer. Sometimes it's activated by accident through voice assistant.

FAQ: Answers to Frequent Questions